Each type of target host has a number of specific configuration variables. This appendix contains a series of tables that explain the variables that apply to each target host type.
The following table lists all component variables for the Sun IPMI target host. For those variables that have default values, the default is listed. For those variables that do not have default values, an example value is shown for illustration.
Table A–1 Component Variables for Sun IPMI Target Host
Variable Name |
Description |
Default or Sample Value |
---|---|---|
installPath |
Physical host name for the target system |
sunfire-v60x-host (Example) |
target_host |
Virtual host name for the target system |
:[installPath]-target (Default) |
description |
(Optional) Description of the target |
test v60x (Example) |
ethernet_mac_address |
Mac address |
00:0E:0C:07:E9:31 (Example) |
ethernet_ip_address |
IP address |
10.42.42.77 (Example) |
ethernet_netmask |
Network mask |
255.255.255.0 (Default) |
architecture |
Target architecture (for example, sun4u, x86) |
x86 (Default) |
kernel_arch |
Kernel architecture (sun4u, i86pc) |
i86pc (Default) |
disk_size |
Size of disk |
20GB (Example) |
osp_control_service |
Whether to call the OSP Control Service, which automates power off, reboot, and power on functions (True, False) |
TRUE (Default) |
sps_ra_parent |
Name of parent for Remote Agent (RA) |
masterserver (Default) |
sps_ra_parent_type |
Whether RA parent is an MS (masterserver) or an LD (local distributor) |
MS (Default) |
sps_ra_host |
Name or IP address for RA host |
:[installPath] (Default) |
sps_ra_conn |
Type of RA connection (raw, ssl, ssh) |
raw (Default) |
sps_ra_ssl_auth |
Whether RA has SSL authorization (y,n) |
N (Default) |
sps_ra_port |
Port for RA |
1131 (Default) |
sps_ra_adv_parms |
Advanced parameters for RA | |
guid |
GUID of the target specified within {} | |
ipmi_ip_address |
IPMI IP address |
10.5.133.135 (Example) |
ipmi_access_userid |
User ID to access IPMI | |
ipmi_access_password |
Encrypted Password to access IPMI | |
ssh_access_userid |
ssh user ID to access the remote management interface | |
ssh_access_password |
Encrypted ssh password to access the remote management interface |
The following table lists all component variables for the Sun ALOM target host. For those variables that have default values, the default is listed. For those variables that do not have default values, an example value is shown for illustration.
Table A–2 Component Variables for Sun ALOM Target Host
Variable Name |
Description |
Default or Sample Value |
---|---|---|
installPath |
Physical host name for the target system |
sunfire-v60x-host (Example) |
target_host |
Virtual host name for the target system |
:[installPath]-target (Default) |
description |
(Optional) Description of the target |
test v60x (Example) |
ethernet_mac_address |
Mac address |
00:0E:0C:07:E9:31 (Example) |
ethernet_ip_address |
IP address |
10.42.42.77 (Example) |
ethernet_netmask |
Network mask |
255.255.255.0 (Default) |
architecture |
Target architecture (for example, sun4u, x86) |
sun4u (Default) |
kernel_arch |
Kernel architecture (sun4u, i86pc) |
sun4u (Default) |
disk_size |
Size of disk |
20GB (Default) |
osp_control_service |
Whether to call the OSP Control Service, which automates power off, reboot, and power on functions (True, False) |
TRUE (Default) |
sps_ra_parent |
Name of parent for RA |
masterserver (Default) |
sps_ra_parent_type |
Whether RA parent is an MS or an LD |
MS (Default) |
sps_ra_host |
Name or IP address of RA host |
:[installPath] (Default) |
sps_ra_conn |
Type of RA connection (raw, ssl, ssh) |
raw (Default) |
sps_ra_ssl_auth |
Whether RA has SSL authorization (y,n) |
N (Default) |
sps_ra_port |
Port for RA |
1131 (Default) |
sps_ra_adv_parms |
Advanced parameters for RA | |
alom_ip_address |
ALOM IP address |
10.5.133.135 (Example) |
alom_access_userid |
User id to access ALOM | |
alom_access_password |
Encrypted password to access ALOM | |
terminal_server_ip_address |
IP address of terminal server connected to this system |
10.5.133.135 (Example) |
terminal_server_port |
Port of terminal server | |
terminal_server_access_userid |
Terminal server user id | |
terminal_server_access_password |
Encrypted password for terminal server | |
terminal_server_type |
Terminal server type |
Cisco2621 (Default) |
terminal_server_version |
Terminal server version | |
terminal_server_hal_jar |
Path to terminal server hardware abstraction layer (HAL) JAR file |
file:///opt/n1osp/drivers/cisco/c2621.jar (Default) |
The following table lists all component variables for the Sun LOM target host. For those variables that have default values, the default is listed. For those variables that do not have default values, an example value is shown for illustration.
Table A–3 Component Variables for Sun LOM Target Host
Variable Name |
Description |
Default or Sample Value |
---|---|---|
installPath |
Physical host name for the target system |
sunfire-v60x-host (Example) |
target_host |
Virtual host name for the target system |
:[installPath]-target (Default) |
description |
(Optional) Description of the target |
test v60x (Example) |
ethernet_mac_address |
Mac address |
00:0E:0C:07:E9:31 (Example) |
ethernet_ip_address |
IP address |
10.42.42.77 (Example) |
ethernet_netmask |
Network mask |
255.255.255.0 (Default) |
architecture |
Target architecture (for example, sun4u, x86) |
sun4u (Default) |
kernel_arch |
Kernel architecture (sun4u, i86pc) |
sun4u (Default) |
disk_size |
Size of disk |
20GB (Default) |
osp_control_service |
Whether to call the OSP Control Service, which automates power off, reboot, and power on functions (True, False) |
TRUE (Default) |
sps_ra_parent |
Name of parent for RA |
masterserver (Default) |
sps_ra_parent_type |
Whether RA parent is an MS or an LD |
MS (Default) |
sps_ra_host |
Name or IP address of RA host | |
sps_ra_conn |
Type of RA connection (raw, ssl, ssh) |
raw (Default) |
sps_ra_ssl_auth |
Whether RA has SSL authorization (y,n) |
N (Default) |
sps_ra_port |
Port for RA |
1131 (Default) |
sps_ra_adv_parms |
Advanced parameters for RA | |
disk_type |
SCSI or IDE |
scsi (Default) |
lom_version |
LOM version | |
lom_hal_jar |
Path to LOM HAL JAR file |
file:///opt/n1osp/drivers/sun/lom.jar (Default) |
terminal_server_ip_address |
IP address of terminal server connected to this system |
10.5.133.135 (Example) |
terminal_server_port |
Port of terminal server | |
terminal_server_userid |
Terminal server user id | |
terminal_server_password |
Encrypted value for terminal server password | |
terminal_server_type |
Terminal server type |
Cisco2621 (Default) |
terminal_server_version |
Terminal server version | |
terminal_server_hal_jar |
Path to terminal server HAL JAR file |
file:///opt/n1osp/drivers/cisco/c2621.jar (Default) |
power_service_true_false |
Does the network management interface provide power on/off service |
true (Default) |
boot_service_true_false |
Does the network management interface provide boot service (boot order disk/network) |
true (Default) |
console_service_true_false |
Does the network management interface provide console |
false (Default) |
The following table lists all component variables for the Sun mid-range target host. The SunMidRange component uses these variables. For those variables that have default values, the default is listed. For those variables that do not have default values, an example value is shown for illustration.
Table A–4 Component Variables for Sun Mid-Range Target Host
Variable Name |
Description |
Default or Sample Value |
---|---|---|
installPath |
Physical host name for the target system |
sunfire-v60x-host (Example) |
target_host |
Virtual host name for the target system |
:[installPath]-target (Default) |
description |
(Optional) Description of the target |
test v60x (Example) |
ethernet_mac_address |
Mac address |
00:0E:0C:07:E9:31 (Example) |
ethernet_ip_address |
IP address |
10.42.42.77 (Example) |
ethernet_netmask |
Network mask |
255.255.255.0 (Default) |
architecture |
Target architecture (for example, sun4u, x86) |
sun4u (Default) |
kernel_arch |
Kernel architecture (sun4u, i86pc) |
sun4u (Default) |
disk_size |
Size of disk |
20GB (Default) |
osp_control_service |
Whether to call the OSP Control Service, which automates power off, reboot, and power on functions (True, False) |
TRUE (Default) |
sps_ra_parent |
Name of parent for RA |
masterserver (Default) |
sps_ra_parent_type |
Whether RA parent is an MS or an LD |
MS (Default) |
sps_ra_host |
Name or IP address for RA host | |
sps_ra_conn |
Type of RA connection (raw, ssl, ssh) |
raw (Default) |
sps_ra_ssl_auth |
Whether RA has SSL authorization (y,n) |
N (Default) |
sps_ra_port |
Port for RA |
1131 (Default) |
sps_ra_adv_parms |
Advanced parameters for RA | |
domain_name |
Domain | |
domainsc_access_userid |
User id to access domain SC | |
domainsc_access_password |
Encrypted password to access domain SC | |
platformsc_ip_address |
IP address of platform SC | |
platformsc_access_userid |
User id to access platform SC | |
platformsc_access_password |
Encrypted password to access platform SC |
The following table lists all component variables for the HP ILO target host. For those variables that have default values, the default is listed. For those variables that do not have default values, an example value is shown for illustration.
Table A–5 Component Variables for HP ILO Target Host
Variable Name |
Description |
Default or Sample Value |
---|---|---|
installPath |
Physical host name for the target system |
sunfire-v60x-host (Example) |
target_host |
Virtual host name for the target system |
:[installPath]-target (Default) |
description |
(Optional) Description of the target |
test v60x (Example) |
ethernet_mac_address |
Mac address |
00:0E:0C:07:E9:31 (Example) |
ethernet_ip_address |
IP address |
10.42.42.77 (Example) |
ethernet_netmask |
Network mask |
255.255.255.0 (Default) |
architecture |
Target architecture (for example, sun4u, x86) |
x86 (Default) |
kernel_arch |
Kernel architecture (sun4u, i86pc) |
i86pc (Default) |
disk_size |
Size of disk |
20GB (Default) |
osp_control_service |
Whether to call the OSP Control Service, which automates power off, reboot, and power on functions (True, False) |
TRUE (Default) |
sps_ra_parent |
Name of parent for RA |
masterserver (Default) |
sps_ra_parent_type |
Whether RA parent is an MS or an LD |
MS (Default) |
sps_ra_host |
Name or IP address of RA host |
:[installPath] (Default) |
sps_ra_conn |
Type of RA connection (raw, ssl, ssh) |
raw (Default) |
sps_ra_ssl_auth |
Whether RA has SSL authorization (y,n) |
N (Default) |
sps_ra_port |
Port for RA |
1131 (Default) |
sps_ra_adv_parms |
Advanced parameters for RA | |
guid |
GUID of the target specified within {} |
{3AE45192 159D 11D8 AEF3 001083FDFE8A} (Example) |
ilo_ip_address |
ILO IP address |
10.5.133.135 (Example) |
ilo_version |
ILO version |
1.6.4 (Default) |
ilo_access_userid |
User id to access ILO | |
ilo_access_password |
Encrypted password to access ILO |
The following table lists all component variables for the other IPMI target host. For those variables that have default values, the default is listed. For those variables that do not have default values, an example value is shown for illustration.
Table A–6 Component Variables for Other IPMI Target Host
Variable Name |
Description |
Default or Sample Value |
---|---|---|
installPath |
Physical host name for the target system |
sunfire-v60x-host (Example) |
target_host |
Virtual host name for the target system |
:[installPath]-target (Default) |
description |
(Optional) Description of the target |
test v60x (Example) |
ethernet_mac_address |
Mac address |
00:0E:0C:07:E9:31 (Example) |
ethernet_ip_address |
IP address |
10.42.42.77 (Example) |
ethernet_netmask |
Network mask |
255.255.255.0 (Default) |
architecture |
Target architecture (for example, sun4u, x86) |
x86 (Default) |
kernel_arch |
Kernel architecture (sun4u, i86pc) |
i86pc (Default) |
disk_size |
Size of disk |
20GB (Default) |
osp_control_service |
Whether to call the OSP Control Service, which automates power off, reboot, and power on functions (True, False) |
TRUE (Default) |
sps_ra_parent |
Name of parent for RA |
masterserver (Default) |
sps_ra_parent_type |
Whether RA parent is an MS or an LD |
MS (Default) |
sps_ra_host |
Name or IP address of RA host |
:[installPath] (Default) |
sps_ra_conn |
Type of RA connection (raw, ssl, ssh) |
raw (Default) |
sps_ra_ssl_auth |
Whether RA has SSL authorization (y,n) |
N (Default) |
sps_ra_port |
Port for RA |
1131 (Default) |
sps_ra_adv_parms |
Advanced parameters for RA | |
guid |
GUID of the target specified within {} |
{3AE45192 159D 11D8 AEF3 001083FDFE8A} (Example) |
disk_type |
Disk type (for example, SCSI, IDE) |
scsi (Default) |
ipmi_ip_address |
IPMI IP address |
10.5.133.135 (Example) |
ipmi_access_userid |
User id to access IPMI | |
ipmi_access_password |
Encrypted password to access IPMI | |
ipmi_hal_jar |
Path to IPMI HAL JAR file |
file:///opt/n1osp/drivers/sun/ipmi.jar (Default) |
ipmi_version |
IPMI version |
1.5 (Default) |
power_service_true_false |
Does the network management interface provide power on/off service? |
true (Default) |
boot_service_true_false |
Does the network management interface provide boot service (disk, then network)? |
false (Default) |
console_service_true_false |
Does the network management interface provide console service? |
false (Default) |
The following table lists all component variables for the other remotely-managed target host. The Other component type uses these variables. Use the Other type for remotely-managed targets that do not fit any of the other categories. For those variables that have default values, the default is listed. For those variables that do not have default values, an example value is shown for illustration.
The Other component type has a long list of variables, some of which will not apply to your specific hardware type. If a variable does not apply, leave it blank.
Variable Name |
Description |
Default Value (if supplied) |
---|---|---|
installPath |
Physical host name for the target system |
sunfire-v60x-host (Example) |
target_host |
Virtual host name for the target system |
:[installPath]-target (Default) |
description |
(Optional) Description of the target |
test v60x (Example) |
ethernet_mac_address |
Mac address |
00:0E:0C:07:E9:31 (Example) |
ethernet_ip_address |
IP address |
10.42.42.77 (Example) |
ethernet_netmask |
Network mask |
255.255.255.0 (Default) |
architecture |
Target architecture (for example, sun4u, x86) |
x86 (Default) |
kernel_arch |
Kernel architecture (sun4u, i86pc) |
i86pc (Default) |
disk_size |
Size of disk |
20GB (Default) |
osp_control_service |
Whether to call the OSP Control Service, which automates power off, reboot, and power on functions (True, False) |
TRUE (Default) |
sps_ra_parent |
Name of parent for RA |
masterserver (Default) |
sps_ra_parent_type |
Whether RA parent is an MS or an LD |
MS (Default) |
sps_ra_host |
Name or IP address of RA host |
:[installPath] (Default) |
sps_ra_conn |
Type of RA connection (raw, ssl, ssh) |
raw (Default) |
sps_ra_ssl_auth |
Whether RA has SSL authorization (y,n) |
N (Default) |
sps_ra_port |
Port for RA |
1131 (Default) |
sps_ra_adv_parms |
Advanced parameters for RA | |
guid |
GUID of the target specified within {} |
{3AE45192 159D 11D8 AEF3 001083FDFE8A} (Example) |
disk_type |
Disk type (for example, SCSI, IDE) |
scsi (Default) |
netmgmt_type_1 |
Network management interface type (ipmi/alom/lom) | |
netmgmt_version_1 |
Network management version | |
netmgmt_hal_jar_1 |
Path to network management HAL JAR file |
file:///opt/n1osp/drivers/sun/ipmi.jar (Default) |
netmgmt_ip_address_1 |
Network management IP address |
|
netmgmt_protocol_1 |
Network management protocol (ipmi/telnet) |
telnet (Default) |
netmgmt_port_1 |
Network management port | |
power_service_true_false_1 |
Does the network management interface provide power on/off service? |
true (Default) |
boot_service_true_false_1 |
Does the network management interface provide boot service (disk, then network)? |
false (Default) |
console_service_true_false_1 |
Does the network management interface provide console service? |
false (Default) |
netmgmt_userid_1 |
User ID to access network management interface | |
netmgmt_password_1 |
Encrypted password to access network management interface | |
terminal_server_type_1 |
Terminal server type |
Cisco2621 (Default) |
terminal_server_version_1 |
Terminal server version | |
terminal_server_hal_jar_1 |
Path to terminal server HAL JAR file |
file:///opt/n1osp/drivers/cisco/c2621.jar (Default) |
terminal_server_ip_address_1 |
IP address of terminal server connected to this system |
10.5.133.135 (Example) |
terminal_server_protocol_1 |
Terminal server access protocol | |
terminal_server_port_1 |
Port of terminal server | |
terminal_server_access_userid_1 |
Terminal server user id | |
terminal_server_access_password_1 |
Encrypted password for terminal server | |
netmgmt_type_2 |
Network management interface type (ipmi/alom/lom) | |
netmgmt_version_2 |
Network management version | |
netmgmt_hal_jar_2 |
Path to network management HAL JAR file |
file:///opt/n1osp/drivers/sun/ipmi.jar (Default) |
netmgmt_ip_address_2 |
Network management IP address |
|
netmgmt_protocol_2 |
Network management protocol (ipmi/telnet) |
telnet (Default) |
netmgmt_port_2 |
Network management port | |
power_service_true_false_2 |
Does the network management interface provide power on/off service? |
true (Default) |
boot_service_true_false_2 |
Does the network management interface provide boot service (disk, then network)? |
false (Default) |
console_service_true_false_2 |
Does the network management interface provide console service? |
false (Default) |
netmgmt_userid_2 |
User ID to access network management interface | |
netmgmt_password_2 |
Encrypted password to access network management interface | |
terminal_server_type_2 |
Terminal server type |
Cisco2621 (Default) |
terminal_server_version_2 |
Terminal server version | |
terminal_server_hal_jar_2 |
Path to terminal server HAL JAR file |
file:///opt/n1osp/drivers/cisco/c2621.jar (Default) |
terminal_server_ip_address_2 |
IP address of terminal server connected to this system |
10.5.133.135 (Example) |
terminal_server_protocol_2 |
Terminal server access protocol | |
terminal_server_port_2 |
Port of terminal server | |
terminal_server_access_userid_2 |
Terminal server user id | |
terminal_server_access_password_2 |
Encrypted password for terminal server |
The following table lists all component variables for the generic target host. The Target type uses these variables. Use the Target type for any host that does not match any of the other target host types. For those variables that have default values, the default is listed. For those variables that do not have default values, an example value is shown for illustration.
Table A–8 Component Variables for Generic Target Host
Variable Name |
Description |
Default or Sample Value |
---|---|---|
installPath |
Physical host name for the target system | |
target_host |
Virtual host name for the target system |
:[installPath]-target (Default) |
description |
(Optional) Description of the target |
test v60x (Example) |
ethernet_mac_address |
Mac address |
00:0E:0C:07:E9:31 (Example) |
ethernet_ip_address |
IP address |
10.42.42.77 (Example) |
ethernet_netmask |
Network mask |
255.255.255.0 (Default) |
architecture |
Target architecture (for example, sun4u, x86) |
sun4u (Default) |
kernel_arch |
Kernel architecture (sun4u, i86pc) |
sun4u (Default) |
disk_size |
Size of disk |
20GB (Default) |
osp_control_service |
Whether to call the OSP Control Service, which automates power off, reboot, and power on functions. |
TRUE (Default) |
sps_ra_parent |
Name of parent for RA |
masterserver (Default) |
sps_ra_parent_type |
Whether RA parent is an MS or an LD |
MS (Default) |
sps_ra_host |
Name or IP address of RA host | |
sps_ra_conn |
Type of RA connection (raw, ssl, ssh) |
raw (Default) |
sps_ra_ssl_auth |
Whether RA has SSL authorization (y,n) |
N (Default) |
sps_ra_port |
Port for RA |
1131 (Default) |
sps_ra_adv_parms |
Advanced parameters for RA |