Other Remotely-Managed Target Host Variables

The following list shows all component variables for the other remotely-managed target host. The Other component type uses these variables. Use the Other type for remotely-managed targets that do not fit any of the other categories. For those variables that have default values, the default is listed. For those variables that do not have default values, an example value is shown for illustration.

The Other component type has a long list of variables, some of which will not apply to your specific hardware type. If a variable does not apply, leave it blank.

installPath

Description: Physical host name for the target system

Example: sunfire-v60x-host

target_host

Description: Virtual host name for the target system

Default value: :[installPath]-target

description

Description: Optional description of the target

Example: test v60x

ethernet_mac_address

Description: Mac address

Example: 00:0E:0C:07:E9:31

ethernet_ip_address

Description: IP address

Example: 10.42.42.77

ethernet_netmask

Description: Network mask

Default value: 255.255.255.0

architecture

Description: Target architecture (for example, sun4u, x86)

Default value: x86

kernel_arch

Description: Kernel architecture (sun4u, i86pc)it literal

Default value: i86pc

disk_size

Description: Size of disk

Default value: 20GB

osp_control_service

Description: Whether to call the OSP Control Service, which automates power off, reboot, and power on functions (True, False)

Default value: TRUE

sps_ra_parent

Description: Name of parent for RA

Default value: masterserver

sps_ra_parent_type

Description: Whether RA parent is an MS or an LD

Default value: MS

sps_ra_host

Description: Name or IP address of RA host

Default value: :[ethernet_ip_address]

sps_ra_conn

Description: Type of RA connection (raw, ssl, ssh)

Default value: RAW

sps_ra_ssl_auth

Description: Whether RA has SSL authorization (y,n)

Default value: N

sps_ra_port

Description: Port for RA

Default value: 1131

sps_ra_adv_parms

Description: Advanced parameters for RA

guid

Description: GUID of the target specified within {}

---

Note –

The GUID must be in the form {dddddddd-dddd-dddd-dddd-dddddddddddd}, where d is a hexadecimal text digit.

---

Example: {3AE45192-159D-11D8-AEF3-001083FDFE8A}

disk_type

Description: Disk type (for example, SCSI, IDE)

Default value: scsi

netmgmt_type_1

Description: Network management interface type (ipmi/alom/lom)

netmgmt_version_1

Description: Network management version

netmgmt_hal_jar_1

Description: Path to network management HAL JAR file

Default value: file://:[targetableComponent:installPath]/SUNWn1osp/drivers/sun/ipmi.jar

netmgmt_ip_address_1

Description: Network management IP address

netmgmt_protocol_1

Description: Network management protocol (ipmi/telnet)

Default value: telnet

netmgmt_port_1

Description: Network management port

power_service_true_false_1

Description: Does the network management interface provide power on/off service?

Default value: true

boot_service_true_false_1

Description: Does the network management interface provide boot service (disk, then network)?

Default value: true

console_service_true_false_1

Description: Does the network management interface provide console service?

Default value: false

netmgmt_userid_1

Description: User ID to access network management interface

netmgmt_password_1

Description: Encrypted password to access network management interface

terminal_server_type_1

Description: Terminal server type

Default value: Cisco2621

terminal_server_version_1

Description: Terminal server version

terminal_server_hal_jar_1

Description: Path to terminal server HAL JAR file

Default value: file://:[targetableComponent:installPath]/SUNWn1osp/drivers/cisco/c2621.jar

terminal_server_ip_address_1

Description: IP address of terminal server connected to this system

Example: 10.5.133.135

terminal_server_protocol_1

Description: Terminal server access protocol

Default value: telnet

terminal_server_port_1

Description: Port of terminal server

terminal_server_userid_1

Description: Terminal server user id

terminal_server_password_1

Description: Encrypted password for terminal server

netmgmt_type_2

Description: Network management interface type (ipmi/alom/lom)

Default value: ipmi

netmgmt_version_2

Description: Network management version

netmgmt_hal_jar_2

Description: Path to network management HAL JAR file

Default value: file://:[targetableComponent:installPath]/SUNWn1osp/drivers/sun/ipmi.jarf

netmgmt_ip_address_2

Description: Network management IP address

netmgmt_protocol_2

Description: Network management protocol (ipmi/telnet)

Default value: telnet

netmgmt_port_2

Description: Network management port

power_service_true_false_2

Description: Does the network management interface provide power on/off service?

Default value: false

boot_service_true_false_2

Description: Does the network management interface provide boot service (disk, then network)?

Default value: false

console_service_true_false_2

Description: Does the network management interface provide console service?

Default value: false

netmgmt_userid_2

Description: User ID to access network management interface

netmgmt_password_2

Description: Encrypted password to access network management interface

terminal_server_type_2

Description: Terminal server type

Default value: Cisco2621

terminal_server_version_2

Description: Terminal server version

terminal_server_hal_jar_2

Description: Path to terminal server HAL JAR file

Default value: file://:[targetableComponent:installPath]/SUNWn1osp/drivers/cisco/c2621.jar

terminal_server_ip_address_2

Description: IP address of terminal server connected to this system

Example: 10.5.133.135

terminal_server_protocol_2

Description: Terminal server access protocol

terminal_server_port_2

Description: Port of terminal server

terminal_server_userid_2

Description: Terminal server user id

terminal_server_password_2

Description: Encrypted password for terminal server