Each type of target host has a number of specific configuration variables. This appendix contains a series of tables that explain the variables that apply to each target host type.
The following list shows all component variables for the Sun IPMI target host. For those variables that have default values, the default is listed. For those variables that do not have default values, an example value is shown for illustration.
Description: Physical host name for the target system.
Example: sunfire-v60x-host
Description: Virtual host name for the target system.
Default value: :[installPath]-target
Description: Optional description of the target.
Example: test v60x
Description: Mac address.
Example: 00:0E:0C:07:E9:31
Description: IP address.
Example: 10.42.42.77
Description: Network mask.
Default value: 255.255.255.0
Description: Target architecture (for example, sun4u, x86).
Default value: x86
Description: Kernel architecture (sun4u, i86pc).
Default value: i86pc
Description: Size of disk.
Example: 20GB
Description: Whether to call the OSP Control Service, which automates power off, reboot, and power on functions (True, False).
Default value: TRUE
Description: Name of parent for Remote Agent (RA).
Default value: masterserver
Description: Whether RA parent is an MS (masterserver) or an LD (local distributor).
Default value: MS
Description: Name or IP address for RA host.
Default value: :[installPath]
Description: Type of RA connection (raw, ssl, ssh).
Default value: raw
Description: Whether RA has SSL authorization (y,n).
Default value: N
Description: Port for RA.
Default value: 1131
Description: Advanced parameters for RA.
Description: GUID of the target specified within {}
The GUID must be in the form {dddddddd-dddd-dddd-dddd-dddddddddddd}, where d is a hexadecimal text digit.
Description: IPMI IP address
Example: 10.5.133.135
Description: User ID to access IPMI
Description: Encrypted Password to access IPMI
Description: SSH user ID to access the remote management interface.
Description: Encrypted SSH password to access the remote management interface.
The following list shows all component variables for the Sun ALOM target host. For those variables that have default values, the default is listed. For those variables that do not have default values, an example value is shown for illustration.
Description: Physical host name for the target system
Example: sunfire-v60x-host
Description: Virtual host name for the target system
Default value: :[installPath]-target
Description: Optional description of the target
Example: test v60x
Description: Mac address
Example: 00:0E:0C:07:E9:31
Description: IP address
Example: 10.42.42.77
Description: Network mask
Default value: 255.255.255.0
Description: Target architecture (for example, sun4u, x86)
Default value: sun4u
Description: Kernel architecture (sun4u, i86pc)
Default value: sun4u
Description: Size of disk
Default value: 20GB
Description: Whether to call the OSP Control Service, which automates power off, reboot, and power on functions (True, False)
Default value: TRUE
Description: Name of parent for RA
Default value: masterserver
Description: Whether RA parent is an MS or an LD
Default value: MS
Description: Name or IP address of RA host
Default value: :[installPath]
Description: Type of RA connection (raw, ssl, ssh)
Default value: raw
Description: Whether RA has SSL authorization (y,n)
Default value: N
Description: Port for RA
Default value: 1131
Description: Advanced parameters for RA
Description: ALOM IP address
Example: 10.5.133.135
Description: User id to access ALOM
Description: Encrypted password to access ALOM
Description: IP address of terminal server connected to this system
Example: 10.5.133.135
Description: Port of terminal server
Description: Terminal server user id
Description: Encrypted password for terminal server
Description: Terminal server type
Default value: Cisco2621
Description: Terminal server version
Description: Path to terminal server hardware abstraction layer (HAL) JAR file
Default value: file:///opt/n1osp/drivers/cisco/c2621.jar
The following list shows all component variables for the Sun LOM target host. For those variables that have default values, the default is listed. For those variables that do not have default values, an example value is shown for illustration.
Description: Physical host name for the target system
Example: sunfire-v60x-host
Description: Virtual host name for the target system
Default value: :[installPath]-target
Description: Optional description of the target
Example: test v60x
Description: Mac address
Example: 00:0E:0C:07:E9:31
Description: IP address
Example: 10.42.42.77
Description: Network mask
Default value: 255.255.255.0
Description: Target architecture (for example, sun4u, x86)
Default value: sun4u
Description: Kernel architecture (sun4u, i86pc)
Default value: sun4u
Description: Size of disk
Default value: 20GB
Description: Whether to call the OSP Control Service, which automates power off, reboot, and power on functions (True, False)
Default value: TRUE
Description: Name of parent for RA
Default value: masterserver
Description: Whether RA parent is an MS or an LD
Default value: MS
Description: Name or IP address of RA host
Description: Type of RA connection (raw, ssl, ssh)
Default value: raw
Description: Whether RA has SSL authorization (y,n)
Default value: N
Description: Port for RA
Default value: 1131
Description: Advanced parameters for RA
Description: SCSI or IDE
Default value: scsi
Description: LOM version
Description: Path to LOM HAL JAR file
Default value: file://:[targetableComponent:installPath]/SUNWn1osp/drivers/sun/lom.jar
Description: IP address of terminal server connected to this system
Example: 10.5.133.135
Description: Port of terminal server
Description: Terminal server user id
Description: Encrypted value for terminal server password
Description: Terminal server type
Default value: Cisco2621
Description: Terminal server version
Description: Path to terminal server HAL JAR file
Default value: file://:[targetableComponent:installPath]/SUNWn1osp/drivers/cisco/c2621.jar
Description: Does the network management interface provide power on/off service
Default value: true
Description: Does the network management interface provide boot service (boot order disk/network)
Default value: true
Description: Does the network management interface provide console
Default value: false
The following list shows all component variables for the Sun mid-range target host. The SunMidRange component uses these variables. For those variables that have default values, the default is listed. For those variables that do not have default values, an example value is shown for illustration.
Description: Physical host name for the target system
Example: sunfire-v60x-host
Description: Virtual host name for the target system
Default value: :[installPath]-target
Description: Optional description of the target
Example: test v60x
Description: Mac address
Example: 00:0E:0C:07:E9:31
Description: IP address
Example: 10.42.42.77
Description: Network mask
Default value: 255.255.255.0
Description: Target architecture (for example, sun4u, x86)
Default value: sun4u
Description: Kernel architecture (sun4u, i86pc)
Default value: sun4u
Description: Size of disk
Default value: 20GB
Description: Whether to call the OSP Control Service, which automates power off, reboot, and power on functions (True, False)
Default value: TRUE
Description: Name of parent for RA
Default value: Name of parent for RA
Description: Whether RA parent is an MS or an LD
Default value: MS
Description: Name or IP address for RA host
Description: Type of RA connection (raw, ssl, ssh)
Default value: raw
Description: Whether RA has SSL authorization (y,n)
Default value: N
Description: Port for RA
Default value: 1131
Description: Advanced parameters for RA
Description: Domain
Description: User id to access domain SC
Description: Encrypted password to access domain SC
Description: IP address of platform SC
Description: User id to access platform SC
Description: Encrypted password to access platform SC
The following list shows all component variables for the HP ILO target host. For those variables that have default values, the default is listed. For those variables that do not have default values, an example value is shown for illustration.
Description: Physical host name for the target system
Example: sunfire-v60x-host
Description: Virtual host name for the target system
Default value: :[installPath]-target
Description: Optional description of the target
Example: test v60x
Description: Mac address
Example: 00:0E:0C:07:E9:31
Description: IP address
Example: 10.42.42.77
Description: Network mask
Default value: 255.255.255.0
Description: Target architecture (for example, sun4u, x86)
Default value: x86
Description: Kernel architecture (sun4u, i86pc)
Default value: i86pc
Description: Size of disk
Default value: 20GB
Description: Whether to call the OSP Control Service, which automates power off, reboot, and power on functions (True, False)
Default value: TRUE
Description: Name of parent for RA
Default value: masterserver
Description: Whether RA parent is an MS or an LD
Default value: MS
Description: Name or IP address of RA host
Default value: :[installPath]
Description: Type of RA connection (raw, ssl, ssh)
Default value: raw
Description: Whether RA has SSL authorization (y,n)
Default value: N
Description: Port for RA
Default value: 1131
Description: Advanced parameters for RA
Description: GUID of the target specified within {}
The GUID must be in the form {dddddddd-dddd-dddd-dddd-dddddddddddd}, where d is a hexadecimal text digit.
Example: {3AE45192-159D-11D8-AEF3-001083FDFE8A}
Description: ILO IP address
Example: 10.5.133.135
Description: ILO version
Default value: 1.6.4
Description: User id to access ILO
Description: Encrypted password to access ILO
The following list shows all component variables for the other IPMI target host. For those variables that have default values, the default is listed. For those variables that do not have default values, an example value is shown for illustration.
Description: Physical host name for the target system
Example: sunfire-v60x-host
Description: Virtual host name for the target system
Default value: :[installPath]-target
Description: Optional description of the target
Example: test v60x
Description: Mac address
Example: 00:0E:0C:07:E9:31
Description: IP address
Example: 10.42.42.77
Description: Network mask
Default value: 255.255.255.0
Description: Target architecture (for example, sun4u, x86)
Default value: x86
Description: Kernel architecture (sun4u, i86pc)
Default value: i86pc
Description: Size of disk
Default value: 20GB
Description: Whether to call the OSP Control Service, which automates power off, reboot, and power on functions (True, False)
Default value: TRUE
Description: Name of parent for RA
Default value: masterserver
Description: Whether RA parent is an MS or an LD
Default value: MS
Description: Name or IP address of RA host
Default value: :[installPath]
Description: Type of RA connection (raw, ssl, ssh)
Default value: raw
Description: Whether RA has SSL authorization (y,n)
Default value: N
Description: Port for RA
Default value: 1131
Description: Advanced parameters for RA
Description: GUID of the target specified within {}
The GUID must be in the form {dddddddd-dddd-dddd-dddd-dddddddddddd}, where d is a hexadecimal text digit.
Example: {3AE45192-159D-11D8-AEF3-001083FDFE8A}
Description: Disk type (for example, SCSI, IDE)
Default value: scsi
Description: IPMI IP address
Example: 10.5.133.135
Description: User id to access IPMI
Description: Encrypted password to access IPMI
Description: Path to IPMI HAL JAR file
Default value: file://:[targetableComponent:installPath]/SUNWn1osp/drivers/sun/ipmi.jarf
Description: IPMI version
Default value: 1.5
Description: Does the network management interface provide power on/off service?
Default value: true
Description: Does the network management interface provide boot service (disk, then network)?
Default value: false
Description: Does the network management interface provide console service?
Default value: false
The following list shows all component variables for the other remotely-managed target host. The Other component type uses these variables. Use the Other type for remotely-managed targets that do not fit any of the other categories. For those variables that have default values, the default is listed. For those variables that do not have default values, an example value is shown for illustration.
The Other component type has a long list of variables, some of which will not apply to your specific hardware type. If a variable does not apply, leave it blank.
Description: Physical host name for the target system
Example: sunfire-v60x-host
Description: Virtual host name for the target system
Default value: :[installPath]-target
Description: Optional description of the target
Example: test v60x
Description: Mac address
Example: 00:0E:0C:07:E9:31
Description: IP address
Example: 10.42.42.77
Description: Network mask
Default value: 255.255.255.0
Description: Target architecture (for example, sun4u, x86)
Default value: x86
Description: Kernel architecture (sun4u, i86pc)it literal
Default value: i86pc
Description: Size of disk
Default value: 20GB
Description: Whether to call the OSP Control Service, which automates power off, reboot, and power on functions (True, False)
Default value: TRUE
Description: Name of parent for RA
Default value: masterserver
Description: Whether RA parent is an MS or an LD
Default value: MS
Description: Name or IP address of RA host
Default value: :[ethernet_ip_address]
Description: Type of RA connection (raw, ssl, ssh)
Default value: RAW
Description: Whether RA has SSL authorization (y,n)
Default value: N
Description: Port for RA
Default value: 1131
Description: Advanced parameters for RA
Description: GUID of the target specified within {}
The GUID must be in the form {dddddddd-dddd-dddd-dddd-dddddddddddd}, where d is a hexadecimal text digit.
Example: {3AE45192-159D-11D8-AEF3-001083FDFE8A}
Description: Disk type (for example, SCSI, IDE)
Default value: scsi
Description: Network management interface type (ipmi/alom/lom)
Description: Network management version
Description: Path to network management HAL JAR file
Default value: file://:[targetableComponent:installPath]/SUNWn1osp/drivers/sun/ipmi.jar
Description: Network management IP address
Description: Network management protocol (ipmi/telnet)
Default value: telnet
Description: Network management port
Description: Does the network management interface provide power on/off service?
Default value: true
Description: Does the network management interface provide boot service (disk, then network)?
Default value: true
Description: Does the network management interface provide console service?
Default value: false
Description: User ID to access network management interface
Description: Encrypted password to access network management interface
Description: Terminal server type
Default value: Cisco2621
Description: Terminal server version
Description: Path to terminal server HAL JAR file
Default value: file://:[targetableComponent:installPath]/SUNWn1osp/drivers/cisco/c2621.jar
Description: IP address of terminal server connected to this system
Example: 10.5.133.135
Description: Terminal server access protocol
Default value: telnet
Description: Port of terminal server
Description: Terminal server user id
Description: Encrypted password for terminal server
Description: Network management interface type (ipmi/alom/lom)
Default value: ipmi
Description: Network management version
Description: Path to network management HAL JAR file
Default value: file://:[targetableComponent:installPath]/SUNWn1osp/drivers/sun/ipmi.jarf
Description: Network management IP address
Description: Network management protocol (ipmi/telnet)
Default value: telnet
Description: Network management port
Description: Does the network management interface provide power on/off service?
Default value: false
Description: Does the network management interface provide boot service (disk, then network)?
Default value: false
Description: Does the network management interface provide console service?
Default value: false
Description: User ID to access network management interface
Description: Encrypted password to access network management interface
Description: Terminal server type
Default value: Cisco2621
Description: Terminal server version
Description: Path to terminal server HAL JAR file
Default value: file://:[targetableComponent:installPath]/SUNWn1osp/drivers/cisco/c2621.jar
Description: IP address of terminal server connected to this system
Example: 10.5.133.135
Description: Terminal server access protocol
Description: Port of terminal server
Description: Terminal server user id
Description: Encrypted password for terminal server
The following list shows all component variables for the generic target host. The Target type uses these variables. Use the Target type for any host that does not match any of the other target host types. For those variables that have default values, the default is listed. For those variables that do not have default values, an example value is shown for illustration.
Description: Physical host name for the target system
Description: Virtual host name for the target system
Default value: :[installPath]-target
Description: Optional description of the target
Example: test v60x
Description: Mac address
Example: 00:0E:0C:07:E9:31
Description: IP address
Example: 10.42.42.77
Description: Network mask
Default value: 255.255.255.0
Description: Target architecture (for example, sun4u, x86)
Default value: sun4u
Description: Kernel architecture (sun4u, i86pc)
Default value: sun4u
Description: Size of disk
Default value: 20GB
Description: Whether to call the OSP Control Service, which automates power off, reboot, and power on functions
Default value: TRUE
Description: Name of parent for RA
Default value: masterserver
Description: Whether RA parent is an MS or an LD
Default value: MS
Description: Name or IP address of RA host
Default value: :[ethernet_ip_address]
Description: Type of RA connection (raw, ssl, ssh)
Default value: raw
Description: Whether RA has SSL authorization (y,n)
Default value: N
Description: Port for RA
Default value: 1131
Description: Advanced parameters for RA
Description: GUID of the target specified within {}
The GUID must be in the form {dddddddd-dddd-dddd-dddd-dddddddddddd}, where d is a hexadecimal text digit.