SunFire x4100, x4200 family
|
SP
version 6464
|
|
|
Sun IPMI target
|
SunFire x2100 family
|
SP
v4.11
|
|
|
Sun IPMI target
|
SunFire v480, v880 family
|
RSC 2.2.3, RSCboot
|
-
Provide IP (static) to RSC port (routable from OS provisioning
server) or connect RSC serial port to terminal server (Terminal server IP should
be routable from OS provisioning server)
-
Enable Telnet (for IP-based managment)
|
-
RSC IP, or terminal server information (ip, type, port connected
to RSC serial
port)
-
RSC user/password
-
MAC address of target provisioning interface
|
Sun RSC target
|
SunFire v240, v210 family
SunFire T1000, T2000 family
|
Sun Advanced Lights Out Manager 1.3 (ALOM)
|
-
Provide IP (static) to ALOM port (routable from OS
provisioning server) or connect ALOM serial port to terminal server
(Terminal server IP should be routable from OS provisioning server)
-
Enable Telnet (for IP-based management)
-
SunFire
T1000/T2000 only: Set OBP diag-switch? variable to false
|
-
ALOM IP, or terminal server information (ip, type,
port connected to ALOM serial port)
-
ALOM user/password
-
MAC address of target provisioning interface
|
Sun ALOM target
|
SunFire v120 family
|
Sun Lights Out Manager version: v3.12 (LOM)
|
-
Connect LOM port to terminal server (Terminal server
IP should be routable from OS provisioning server)
-
To share Serial A/LOM between the LOM and the Console,
setup console connections to both the Serial A/LOM and the Serial
B port
For example, from the Solaris command line:
eeprom input-device=ttya
eeprom output-device=ttya
reboot
|
|
-
LOM user/password (if any)
-
MAC address of the target provisioning interface
-
Terminal server information (type, ip, port connected
to Target LOM port)
|
Sun LOM target
|
SunFire v20z, v40z family
|
Sun IPMI v1.5 Service Processor, Version V2.1.0.10
|
-
Provide IP (static) to Network Management port (routable
from OS provisioning server)
-
Enable ssh
-
Enable ipmi, ipmi channel “lan”
|
|
Sun IPMI target
|
SunFire B100s (sparc), B100x (x86) family
|
Sun Advanced Lights Out Manager for Blade Servers 1.2 (ALOM-B
1.2)
|
-
Provide IP (static) to ALOM port (routable from OS
provisioning server) or connect ALOM serial port to terminal server
(Terminal server IP should be routable from OS provisioning server)
-
Enable Telnet (for IP-based managment)
|
-
ALOM IP, or terminal server information (ip, type,
port connected to ALOM serial port)
-
ALOM user/password
-
MAC address of target provisioning interface
-
GUID of the provisioning interface (for B100x only)
|
Other Remotely Managed Target using b1600sc.jar as
the Network Management HAL jar power, boot, and console services
are all supported by this HAL
|
SunFire v60x, v65x family
|
IPMI-enabled Baseboard Management Controller (BMC)
|
-
Provide IP (static) to IPMI port (routable from OS
provisioning server)
-
Enable
ipmi, ipmi channel “lan”
-
Configure BIOS to boot from PXE-enabled NICs first
|
|
Other IPMI target using ipmi.jar as the
Network Management HAL jar only power, service is supported by this
HAL
|
SunFire 3800, 4800 or 6800 domain
|
System Controller:
ScApp version: 5.18.1
Build_01 RTOS version: 41
|
|
-
Platform SC IP address, user ID, and password
-
Domain name, user ID and password
-
MAC address of the target provisioning interface
|
Sun Mid Range Target
|
HP Proliant DL Series (supporting iLO-based managment)
|
iLO Integrated Lights Out Manager v 1.6.41
|
|
|
HP iLO Target
|
Other Targets
|
-
|
Configure BIOS to boot from PXE-enabled NICs first (x86 only)
|
|
Generic Target (manual control)
|