How to Set up NFS Access

If you are not using JET to provision the SuSe Linux OS, you must set up NFS access on your network. The OS distribution should be accessible through NFS for each subnet served from this boot and install server.

Before You Begin

Be sure that the NFS utililties are installed on the boot and install server.

Steps

1. Edit the /etc/exports file and add lines similar to the following example:

   /export 10.42.42.*(ro)

2. Enable NFS and start it.

   Use commands similar to the following, which apply to RedHat AS 3.0:

   #chkconfig --level 35 nfs on #service nfs restart