Relocation Types (Processor-Specific)

Relocation entries describe how to alter instruction and data fields in the following figures. Bit numbers appear in the lower box corners.

On the SPARC platform, relocation entries apply to bytes (byte8), half-words (half16), or words.

On 64–bit SPARC and x64, relocations also apply to extended-words (xword64).

On x86, relocation entries apply to words (word32).

word32 specifies a 32–bit field occupying 4 bytes with an arbitrary byte alignment. These values use the same byte order as other word values in the x86 architecture.

In all cases, the r_offset value designates the offset or virtual address of the first byte of the affected storage unit. The relocation type specifies which bits to change and how to calculate their values.

Calculations for the following relocation types assume the actions are transforming a relocatable file into either an executable or a shared object file. Conceptually, the link-editor merges one or more relocatable files to form the output. The link-editor first decides how to combine and locate the input files. The link-editor then updates the symbol values and performs the relocation. Relocations applied to executable or shared object files are similar and accomplish the same result. Descriptions in the tables in this section use the following notation.

A

The addend used to compute the value of the relocatable field.

B

The base address at which a shared object is loaded into memory during execution. Generally, a shared object file is built with a base virtual address of 0. However, the execution address of the shared object is different. See Program Header.

G

The offset into the global offset table at which the address of the relocation entry's symbol resides during execution. See Global Offset Table (Processor-Specific).

GOT

The address of the global offset table. See Global Offset Table (Processor-Specific).

L

The section offset or address of the procedure linkage table entry for a symbol. See Procedure Linkage Table (Processor-Specific).

P

The section offset or address of the storage unit being relocated, computed using r_offset.

S

The value of the symbol whose index resides in the relocation entry.

Z

The size of the symbol whose index resides in the relocation entry.

SPARC: Relocation Types

Field names in the following table tell whether the relocation type checks for overflow. A calculated relocation value can be larger than the intended field, and a relocation type can verify (V) the value fits or truncate (T) the result. As an example, V-simm13 means that the computed value can not have significant, nonzero bits outside the simm13 field.

Table 7–13 SPARC: ELF Relocation Types

Name	Value	Field	Calculation
R_SPARC_NONE	0	None	None
R_SPARC_8	1	V-byte8	S + A
R_SPARC_16	2	V-half16	S + A
R_SPARC_32	3	V-word32	S + A
R_SPARC_DISP8	4	V-byte8	S + A - P
R_SPARC_DISP16	5	V-half16	S + A - P
R_SPARC_DISP32	6	V-disp32	S + A - P
R_SPARC_WDISP30	7	V-disp30	(S + A - P) >> 2
R_SPARC_WDISP22	8	V-disp22	(S + A - P) >> 2
R_SPARC_HI22	9	T-imm22	(S + A) >> 10
R_SPARC_22	10	V-imm22	S + A
R_SPARC_13	11	V-simm13	S + A
R_SPARC_LO10	12	T-simm13	(S + A) & 0x3ff
R_SPARC_GOT10	13	T-simm13	G & 0x3ff
R_SPARC_GOT13	14	V-simm13	G
R_SPARC_GOT22	15	T-simm22	G >> 10
R_SPARC_PC10	16	T-simm13	(S + A - P) & 0x3ff
R_SPARC_PC22	17	V-disp22	(S + A - P) >> 10
R_SPARC_WPLT30	18	V-disp30	(L + A - P) >> 2
R_SPARC_COPY	19	None	Refer to the explanation following this table.
R_SPARC_GLOB_DAT	20	V-word32	S + A
R_SPARC_JMP_SLOT	21	None	Refer to the explanation following this table.
R_SPARC_RELATIVE	22	V-word32	B + A
R_SPARC_UA32	23	V-word32	S + A
R_SPARC_PLT32	24	V-word32	L + A
R_SPARC_HIPLT22	25	T-imm22	(L + A) >> 10
R_SPARC_LOPLT10	26	T-simm13	(L + A) & 0x3ff
R_SPARC_PCPLT32	27	V-word32	L + A - P
R_SPARC_PCPLT22	28	V-disp22	(L + A - P) >> 10
R_SPARC_PCPLT10	29	V-simm13	(L + A - P) & 0x3ff
R_SPARC_10	30	V-simm10	S + A
R_SPARC_11	31	V-simm11	S + A
R_SPARC_HH22	34	V-imm22	(S + A) >> 42
R_SPARC_HM10	35	T-simm13	((S + A) >> 32) & 0x3ff
R_SPARC_LM22	36	T-imm22	(S + A) >> 10
R_SPARC_PC_HH22	37	V-imm22	(S + A - P) >> 42
R_SPARC_PC_HM10	38	T-simm13	((S + A - P) >> 32) & 0x3ff
R_SPARC_PC_LM22	39	T-imm22	(S + A - P) >> 10
R_SPARC_WDISP16	40	V-d2/disp14	(S + A - P) >> 2
R_SPARC_WDISP19	41	V-disp19	(S + A - P) >> 2
R_SPARC_7	43	V-imm7	S + A
R_SPARC_5	44	V-imm5	S + A
R_SPARC_6	45	V-imm6	S + A
R_SPARC_HIX22	48	V-imm22	((S + A) ^ 0xffffffffffffffff) >> 10
R_SPARC_LOX10	49	T-simm13	((S + A) & 0x3ff) | 0x1c00
R_SPARC_H44	50	V-imm22	(S + A) >> 22
R_SPARC_M44	51	T-imm10	((S + A) >> 12) & 0x3ff
R_SPARC_L44	52	T-imm13	(S + A) & 0xfff
R_SPARC_REGISTER	53	V-word32	S + A
R_SPARC_UA16	55	V-half16	S + A
R_SPARC_GOTDATA_HIX22	80	V-imm22	((S + A - GOT) >> 10) ^ ((S + A - GOT) >> 31)
R_SPARC_GOTDATA_LOX10	81	T-imm13	((S + A - GOT) & 0x3ff) | (((S + A - GOT) >> 31) & 0x1c00)
R_SPARC_GOTDATA_OP_HIX22	82	T-imm22	(G >> 10) ^ (G >> 31)
R_SPARC_GOTDATA_OP_LOX10	83	T-imm13	(G & 0x3ff) | ((G >> 31) & 0x1c00)
R_SPARC_GOTDATA_OP	84	Word32	Refer to the explanation following this table.
R_SPARC_SIZE32	86	V-word32	Z + A

---

Note –

Additional relocations are available for thread-local storage references. These relocations are covered in Chapter 8, Thread-Local Storage.

---

Some relocation types have semantics beyond simple calculation.

R_SPARC_GOT10

Resembles R_SPARC_LO10, except that the relocation refers to the address of the symbol's GOT entry. Additionally, R_SPARC_GOT10 instructs the link-editor to create a global offset table.

R_SPARC_GOT13

Resembles R_SPARC_13, except that the relocation refers to the address of the symbol's GOT entry. Additionally, R_SPARC_GOT13 instructs the link-editor to create a global offset table.

R_SPARC_GOT22

Resembles R_SPARC_22, except that the relocation refers to the address of the symbol's GOT entry. Additionally, R_SPARC_GOT22 instructs the link-editor to create a global offset table.

R_SPARC_WPLT30

Resembles R_SPARC_WDISP30, except that the relocation refers to the address of the symbol's procedure linkage table entry. Additionally, R_SPARC_WPLT30 instructs the link-editor to create a procedure linkage table.

R_SPARC_COPY

Created by the link-editor for dynamic executables to preserve a read-only text segment. The relocation offset member refers to a location in a writable segment. The symbol table index specifies a symbol that should exist both in the current object file and in a shared object. During execution, the runtime linker copies data associated with the shared object's symbol to the location specified by the offset. See Copy Relocations.

R_SPARC_GLOB_DAT

Resembles R_SPARC_32, except that the relocation sets a GOT entry to the address of the specified symbol. The special relocation type enables you to determine the correspondence between symbols and GOT entries.

R_SPARC_JMP_SLOT

Created by the link-editor for dynamic objects to provide lazy binding. The relocation offset member gives the location of a procedure linkage table entry. The runtime linker modifies the procedure linkage table entry to transfer control to the designated symbol address.

R_SPARC_RELATIVE

Created by the link-editor for dynamic objects. The relocation offset member gives the location within a shared object that contains a value representing a relative address. The runtime linker computes the corresponding virtual address by adding the virtual address at which the shared object is loaded to the relative address. Relocation entries for this type must specify a value of zero for the symbol table index.

R_SPARC_UA32

Resembles R_SPARC_32, except that the relocation refers to an unaligned word. The word to be relocated must be treated as four separate bytes with arbitrary alignment, not as a word aligned according to the architecture requirements.

R_SPARC_LM22

Resembles R_SPARC_HI22, except that the relocation truncates rather than validates.

R_SPARC_PC_LM22

Resembles R_SPARC_PC22, except that the relocation truncates rather than validates.

R_SPARC_HIX22

Used with R_SPARC_LOX10 for executables that are confined to the uppermost 4 gigabytes of the 64–bit address space. Similar to R_SPARC_HI22, but supplies ones complement of linked value.

R_SPARC_LOX10

Used with R_SPARC_HIX22. Similar to R_SPARC_LO10, but always sets bits 10 through 12 of the linked value.

R_SPARC_L44

Used with the R_SPARC_H44 and R_SPARC_M44 relocation types to generate a 44-bit absolute addressing model.

R_SPARC_REGISTER

Used to initialize a register symbol. The relocation offset member contains the register number to be initialized. A corresponding register symbol must exist for this register. The symbol must be of type SHN_ABS.

R_SPARC_GOTDATA_OP_HIX22, R_SPARC_GOTDATA_OP_LOX10, and R_SPARC_GOTDATA_OP

These relocations provide for code transformations.

64-bit SPARC: Relocation Types

The following notation, used in relocation calculation, is unique to 64–bit SPARC.

O

The secondary addend used to compute the value of the relocation field. This addend is extracted from the r_info field by applying the ELF64_R_TYPE_DATA macro.

The relocations that are listed in the following table extend, or alter, the relocations defined for 32–bit SPARC. See SPARC: Relocation Types.

Table 7–14 64-bit SPARC: ELF Relocation Types

Name	Value	Field	Calculation
R_SPARC_HI22	9	V-imm22	(S + A) >> 10
R_SPARC_GLOB_DAT	20	V-xword64	S + A
R_SPARC_RELATIVE	22	V-xword64	B + A
R_SPARC_64	32	V-xword64	S + A
R_SPARC_OLO10	33	V-simm13	((S + A) & 0x3ff) + O
R_SPARC_DISP64	46	V-xword64	S + A - P
R_SPARC_PLT64	47	V-xword64	L + A
R_SPARC_REGISTER	53	V-xword64	S + A
R_SPARC_UA64	54	V-xword64	S + A
R_SPARC_H34	85	V-imm22	(S + A) >> 12
R_SPARC_SIZE64	87	V-xword64	Z + A

The following relocation type has semantics beyond simple calculation.

R_SPARC_OLO10

Resembles R_SPARC_LO10, except that an extra offset is added to make full use of the 13-bit signed immediate field.

32-bit x86: Relocation Types

The relocations that are listed in the following table are defined for 32–bit x86.

Table 7–15 32-bit x86: ELF Relocation Types

Name	Value	Field	Calculation
R_386_NONE	0	None	None
R_386_32	1	word32	S + A
R_386_PC32	2	word32	S + A - P
R_386_GOT32	3	word32	G + A
R_386_PLT32	4	word32	L + A - P
R_386_COPY	5	None	Refer to the explanation following this table.
R_386_GLOB_DAT	6	word32	S
R_386_JMP_SLOT	7	word32	S
R_386_RELATIVE	8	word32	B + A
R_386_GOTOFF	9	word32	S + A - GOT
R_386_GOTPC	10	word32	GOT + A - P
R_386_32PLT	11	word32	L + A
R_386_16	20	word16	S + A
R_386_PC16	21	word16	S + A - P
R_386_8	22	word8	S + A
R_386_PC8	23	word8	S + A - P
R_386_SIZE32	38	word32	Z + A

---

Note –

Additional relocations are available for thread-local storage references. These relocations are covered in Chapter 8, Thread-Local Storage.

---

Some relocation types have semantics beyond simple calculation.

R_386_GOT32

Computes the distance from the base of the GOT to the symbol's GOT entry. The relocation also instructs the link-editor to create a global offset table.

R_386_PLT32

Computes the address of the symbol's procedure linkage table entry and instructs the link-editor to create a procedure linkage table.

R_386_COPY

Created by the link-editor for dynamic executables to preserve a read-only text segment. The relocation offset member refers to a location in a writable segment. The symbol table index specifies a symbol that should exist both in the current object file and in a shared object. During execution, the runtime linker copies data associated with the shared object's symbol to the location specified by the offset. See Copy Relocations.

R_386_GLOB_DAT

Used to set a GOT entry to the address of the specified symbol. The special relocation type enable you to determine the correspondence between symbols and GOT entries.

R_386_JMP_SLOT

Created by the link-editor for dynamic objects to provide lazy binding. The relocation offset member gives the location of a procedure linkage table entry. The runtime linker modifies the procedure linkage table entry to transfer control to the designated symbol address.

R_386_RELATIVE

Created by the link-editor for dynamic objects. The relocation offset member gives the location within a shared object that contains a value representing a relative address. The runtime linker computes the corresponding virtual address by adding the virtual address at which the shared object is loaded to the relative address. Relocation entries for this type must specify a value of zero for the symbol table index.

R_386_GOTOFF

Computes the difference between a symbol's value and the address of the GOT. The relocation also instructs the link-editor to create the global offset table.

R_386_GOTPC

Resembles R_386_PC32, except that it uses the address of the GOT in its calculation. The symbol referenced in this relocation normally is _GLOBAL_OFFSET_TABLE_, which also instructs the link-editor to create the global offset table.

x64: Relocation Types

The relocations that are listed in the following table are defined for x64.

Table 7–16 x64: ELF Relocation Types

Name	Value	Field	Calculation
R_AMD64_NONE	0	None	None
R_AMD64_64	1	word64	S + A
R_AMD64_PC32	2	word32	S + A - P
R_AMD64_GOT32	3	word32	G + A
R_AMD64_PLT32	4	word32	L + A - P
R_AMD64_COPY	5	None	Refer to the explanation following this table.
R_AMD64_GLOB_DAT	6	word64	S
R_AMD64_JUMP_SLOT	7	word64	S
R_AMD64_RELATIVE	8	word64	B + A
R_AMD64_GOTPCREL	9	word32	G + GOT + A - P
R_AMD64_32	10	word32	S + A
R_AMD64_32S	11	word32	S + A
R_AMD64_16	12	word16	S + A
R_AMD64_PC16	13	word16	S + A - P
R_AMD64_8	14	word8	S + A
R_AMD64_PC8	15	word8	S + A - P
R_AMD64_PC64	24	word64	S + A - P
R_AMD64_GOTOFF64	25	word64	S + A - GOT
R_AMD64_GOTPC32	26	word32	GOT + A + P
R_AMD64_SIZE32	32	word32	Z + A
R_AMD64_SIZE64	33	word64	Z + A

---

Note –

Additional relocations are available for thread-local storage references. These relocations are covered in Chapter 8, Thread-Local Storage.

---

The special semantics for most of these relocation types are identical to those used for x86. Some relocation types have semantics beyond simple calculation.

R_AMD64_GOTPCREL

This relocations has different semantics from the R_AMD64_GOT32 or equivalent R_386_GOTPC relocation. The x64 architecture provides an addressing mode that is relative to the instruction pointer. Therefore, an address can be loaded from the GOT using a single instruction.

The calculation for the R_AMD64_GOTPCREL relocation provides the difference between the location in the GOT where the symbol's address is given, and the location where the relocation is applied.

R_AMD64_32

The computed value is truncated to 32–bits. The link-editor verifies that the generated value for the relocation zero-extends to the original 64–bit value.

R_AMD64_32S

The computed value is truncated to 32–bits. The link-editor verifies that the generated value for the relocation sign-extends to the original 64–bit value.

R_AMD64_8, R_AMD64_16, R_AMD64_PC16, and R_AMD64_PC8

These relocations are not conformant to the x64 ABI, but are added here for documentation purposes. The R_AMD64_8 relocation truncates the computed value to 8-bits. The R_AMD64_16 relocation truncates the computed value to 16-bits.