| | | | |
| C |
| |
| | cfgadm (  ) |
| | | -c ( ) |
| | | -l ( ) ( ) |
| |
| | cfgadm -al -o show_SCSI_LUN ( ) ( ) |
| |
| | cfgadm -c unconfigure ( ) |
| |
| | cfgadm(1M) ( ) |
| |
| | cfgadm configure ( ) |
| |
| | cfgadm_fp(1M) ( ) |
| |
| | configuration |
| | | device ( ) |
| | | dump ( ) |
| | | fabric devices ( ) |
| | | FCoE ( ) |
| | | Fibre Channel overview ( ) |
| | | manual ( ) |
| | | multipathing ( ) |
| | | SAS devices ( ) |
| | | tasks ( ) |
| |
| | configure |
| | | automatic failback ( ) |
| | | fabric-connected devices ( ) |
| | | multipathing feature ( ) ( ) |
| | | NPIV ports ( ) |
| | | SAN devices ( ) |
| | | SAS devices ( ) |
| | | third-party devices ( ) ( ) |
| | | virtual Fibre Channel ports ( ) |
| |
| | considerations |
| | | device name changes ( ) |
| | | device specific ( ) |
| | | fabric boot devices ( ) |
| | | IPFC ( ) |
| | | multipathing ( ) |
| | | multipathing, enabling and disabling ( ) |
| | | per-port configuration ( ) |
| | | SAN devices ( ) |
| | | SAS devices ( ) |
| | | stmsboot command ( ) |
| | | StorageTek Traffic Manager ( ) |
| | | third-party device configuration ( ) |
| | | | |
| F |
| |
| | fabric-connected host ports ( ) ( ) |
| |
| | fabric device configuration ( ) |
| |
| | fc-fabric ( ) |
| |
| | FCAL ( ) |
| |
| | FCoE |
| | | configuring ports ( ) |
| | | creating ports ( ) |
| | | deleting ports ( ) |
| | | limitations ( ) |
| | | reporting status on ports ( ) |
| |
| | Fibre Channel |
| | | arbitrated loop ( ) |
| | | booting Solaris 10 x86/x64 ( ) |
| | | configuration overview ( ) |
| | | configuring IPFC SAN devices ( ) |
| | | determining adapter port instances ( ) |
| | | enabling and disabling multipathing ( ) |
| | | HBA ( ) |
| | | IPFC considerations ( ) |
| | | listing LUN level information ( ) |
| | | multipathing configuration ( ) |
| | | supported HBA interfaces ( ) |
| |
| | Fibre Channel ports, configuring ( ) |
| | | | |
| M |
| |
| | modinfo ( ) |
| |
| | mpathadm commands ( ) |
| | | automatic failback, configuring ( ) |
| | | configure automatic failback ( ) |
| | | disable a path ( ) |
| | | enable a path ( ) |
| | | initiator ports |
| | | | discovered ( ) |
| | | | properties ( ) |
| | | logical unit with a particular name ( ) |
| | | logical units |
| | | | associated with target port ( ) |
| | | | discovered ( ) |
| | | | fail over ( ) |
| | | | properties and associated path ( ) |
| |
| | mpt driver ( ) |
| |
| | Multipath Management API plug-in |
| | | library ( ) |
| | | properties ( ) |
| |
| | multipathing |
| | | boot considerations ( ) |
| | | configuring automatic failback ( ) |
| | | configuring device nodes ( ) |
| | | configuring third-party storage devices ( ) |
| | | disabled, device node configuration ( ) |
| | | disabled, multiple device configuration ( ) |
| | | enabling and disabling ( ) |
| | | enabling and disabling on a per-port basis ( ) |
| | | fabric device node configuration ( ) |
| | | features ( ) |
| | | manual configuration ( ) |
| | | mpathadm command ( ) |
| | | SAS boot device configuration ( ) |
| | | SAS considerations ( ) |
| | | support ( ) |
| | | troubleshooting ( ) |
