CLI Command Reference
This appendix contains the most common ILOM commands used to administer your Oracle Sun server from the ILOM command-line interface (CLI).
Syntax examples in this appendix use the target starting with /SP/which applies to most Oracle Sun servers. However, if you are performing these commands from a CMM, you can interchange the starting /SP/ target with /CMM/ since the sub-targets are common across all server platforms. Or, if you are performing these commands from a server blade in a chassis monitoring module (CMM), you can the interchange the starting /SP/ target with /CH/BLn or CH/BLn/Noden depending the server blade platform.
cd Command
Use the cd command to navigate the namespace. When you cd to a target location, that location then becomes the default target for all other commands. Using the
-default option with no target returns you to the top of the namespace. Typing
cd -default is the equivalent of typing cd /. Typing just cd displays your current location in the namespace. Typing help targets displays a list of all targets in the entire namespace.
Syntax
cd target
Options
[-default] [-h|help]
Targets and Properties
Any location in the namespace.
Examples
To create a user named emmett, cd to /SP/users, then execute the create command with /SP/users as the default target.
-> cd /SP/users
-> create emmett
To find your location, type cd.
-> cd /SP/users
create Command
Use the create command to set up an object in the namespace. Unless you specify properties with the create command, they are empty.
Syntax
create [options] target [propertyname=value]
Options
[-h|help]
Targets, Properties, and Values
TABLE A-1 Targets, Properties and Values for create Command
|
Valid Targets
|
Properties
|
Values
|
Default
|
|
/SP/users/username
|
password
role
|
<string>
administrator|operator|a|u|c|r|o|s
|
(none)
o
|
|
/SP/services/snmp/communities/communityname
|
permissions
|
ro|rw
|
ro
|
|
/SP/services/snmp/user/
username
|
authenticationprotocol
authenticationpassword
permissions
privacyprotocol
privacypassword
|
MD5
<string>
ro|rw
none|DES
<string>
|
MD5
(null string)
ro
DES
(null string)
|
Example
-> create /SP/users/susan role=administrator
delete Command
Use the delete command to remove an object from the namespace. You will be prompted to confirm a delete command. Eliminate this prompt by using the
-script option.
Syntax
delete [options] [-script] target
Options
[-h|help] [-script]
Targets
TABLE A-2 Targets for delete Command
|
Valid Targets
|
|
/SP/users/username
|
|
/SP/services/snmp/communities/communityname
|
|
/SP/services/snmp/user/username
|
Examples
-> delete /SP/users/susan
-> delete /SP/services/snmp/communities/public
dump Command
Use the dump command to transfer a file from a target to a remote location specified by the URI.
Syntax
dump -destination <URI> target
Options
[-destination]
exit Command
Use the exit command to end a CLI session.
Syntax
exit [options]
Options
[-h|help]
help Command
Use the help command to display Help information about commands and targets. Using the -o|output terse option displays usage information only. The
-o|output verbose option displays usage, description, and additional information including examples of command usage. If you do not use the
-o|output option, usage information and a brief description of the command are displayed.
Specifying command targets displays a complete list of valid targets for that command from the fixed targets in /SP and /SYS. Fixed targets are targets that cannot be created by a user.
Specifying the legal command target displays the copyright information and product use rights.
Syntax
help [options] command target
Options
[-h|help] [-o|output terse|verbose]
Commands
cd, create, delete, exit, help, load, reset, set, show, start, stop, version
Examples
-> help load
The load command transfers a file from a remote location specified by the URI and updates the given target.
Usage: load [-script] -source <URI> [target]
-source: Specify the location to get a file.
|
-> help -output verbose reset
The reset command is used to reset a target.
Usage: reset [-script] [target]
Available options for this command:
-script: Do not prompt for yes/no confirmation and act as if yes were specified.
|
load Command
Use the load command to transfer an image file from a source, indicated by a Uniform Resource Indicator (URI), to update ILOM firmware. The URI can specify a protocol and credentials used for the transfer. The load command supports multiple protocols (TFTP, SCP, FTP). If credentials are required and not specified, the command prompts you for a password. Using the -script option eliminates the prompt for a yes or no confirmation and the command acts as if yes were specified.
| Note - Use this command to update your ILOM firmware and BIOS.
|
TABLE A-3 Targets, Properties, and Values for load Command
|
Valid Targets
|
Properties
|
Values
|
Default
|
|
/SP/users/username
|
password
role
|
<string>
administrator|operator|a|u|c|r|o|s
|
(none)
o
|
Syntax
load -source URI
Options
[-h|help] [-script]
Example
-> load -source tftp://ip_address/newmainimage
| Note - A firmware upgrade will cause the server and ILOM to be reset. It is recommended that a graceful shutdown of the server be done prior to the upgrade procedure. An upgrade takes about five minutes to complete. ILOM will enter a special mode to load new firmware. No other tasks can be performed in ILOM until the firmware upgrade is complete and ILOM is reset.
|
-> load -source tftp://ip_address/newmainimage
Are you sure you want to load the specified file (y/n)? y
File upload is complete.
Firmware image verification is complete.
Do you want to preserve the configuration (y/n)? n
Updating firmware in flash RAM:
.
Firmware update is complete.
ILOM will not be restarted with the new firmware.
|
reset Command
Use the reset command to reset the state of the target. You will be prompted to confirm a reset operation. Eliminate this prompt by using the -script option.
| Note - The reset command does not affect the power state of hardware devices.
|
Syntax
reset [options] target
Options
[-h|help] [-script]
(The -f|force option is supported on SPARC-based systems.)
Targets
TABLE A-4 Targets for reset Command
|
Valid Targets
|
|
/SP
|
|
/SYS
|
Examples
-> reset /SP
-> reset /SYS
set Command
Use the set command to specify the properties of the target.
Syntax
set [options] target [propertyname=value]
Options
[-h|help]
Targets, Properties, and Values
TABLE A-5 Targets, Properties, and Values for set Command
|
Valid Targets
|
Properties
|
Values
|
Default
|
|
/HOST/tpm
|
enable
activate
forceclear
|
true | false
true | false
true | false
|
false
false
false
|
|
/SP/alertmgmt/rules
|
testalert
|
true
|
(none)
|
|
/SP/alertmgmt/rules/
rulename
(rulename = 1 through 15)
|
community_or_username
destination
destination_port
event_class_filter
event_type_filter
level
snmp_version
type
|
<string>
email_address
<integer>
“ “ | Log | Email | Internal | Captive Shell | Backup | Restore | Audit | IPMI | Chassis | Fault | System | ActDir
“ “ | Developer | Connection | Send | Product | Chassis | Command Entered | State | Action | Fault | Repair | Warning
disable|down|critical|major|minor
1|2c|3
email | ipmipet | snmptrap
|
public
(none)
0
(none)
(none)
(none)
3
(none)
|
|
/SP/cli
|
timeout
|
<integer>
|
(none)
|
|
/SP/clock
|
datetime
timezone
usentpserver
|
current date and time
EST | PST8PDT
enabled|disabled
|
<string>
GMT
disabled
|
|
/SP/console/history
|
line_count
pause_count
start_from
|
<integer>
<integer>
end | beginning
|
0
0
end
|
|
/SP/services/http
|
port
secureredirect
servicestate
|
<integer>
enabled|disabled
enabled|disabled
|
80
enabled
disabled
|
|
/SP/services/https
|
port
servicestate
|
<integer>
enabled|disabled
|
443
disabled
|
|
/SP/services/ipmi
|
servicestate
|
enabled|disabled
|
enabled
|
|
/SP/services/kvms
|
mousemode
servicestate
|
absolute|relative
enabled|disabled
|
absolute
enabled
|
|
/SP/services/snmp
|
engineid
mibs
port
sets
v1
v2c
v3
servicestate
|
<hexadecimal>
dump_uri
<integer>
enabled|disabled
enabled|disabled
enabled|disabled
enabled|disabled
enabled|disabled
|
IP address
(none)
161
disabled
disabled
disabled
enabled
enabled
|
|
/SP/services/snmp/
communities/private
|
permission
|
ro |rw
|
rw
|
|
/SP/services/snmp/
communities/public
|
permission
|
ro|rw
|
ro
|
|
/SP/services/snmp/user
/username
|
authenticationprotocol
authenticationpassword
permissions
privacyprotocol
privacypassword
|
MD5
<string>
ro|rw
none|DES
<string>
|
MD5
(null string)
ro
DES
(null string)
|
|
/SP/services/ssh
|
external_host
generate_new_key_action
generate_new_key_type
restart_sshd_action
state
|
true
rsa|dsa
true
enabled|disabled
|
(none)
(none)
(none)
enabled
|
|
/SP/services/sso
|
state
|
enabled|disabled
|
enabled
|
|
/SP/users/username
|
role
password
|
administrator|operator|a|u|c|r|o|s
<string>
|
(none)
(none)
|
|
/SP/clients/
activedirectory
|
state
defaultrole
dnslocatormode
expsearchmode
address
port
strictcertmode
timeout
logdetail
|
enabled | disabled
administrator | operator | a| u | c| r | o | s
enabled | disabled
enabled | disabled
<ip address> or <DNS name>
<integer between 0-65535>
enabled | disabled
<integer>
none | high | medium | low |
trace
|
disabled
(none)
disabled
disabled
(none)
0
disabled
4
none
|
|
/SP/clients/
activedirectory/
admingroups/n
where n is 1-5
|
name
|
<string>
|
(none)
|
|
/SP/clients/
activedirectory/
opergroups/n
where n is 1-5
|
name
|
<string>
|
(none)
|
|
/SP/clients/
activedirectory/
userdomains/n
where n is 1-5
|
domain
|
<string>
|
(none)
|
|
/SP/clients/
activedirectory/
customgroups/n
where n is 1-5
|
name
roles
|
<string>
a|u|c|r|o|s|administrator|operator
|
(none)
o
|
|
/SP/clients/
activedirectory/
alternateservers/n
where n is 1-5
|
address
port
|
<ip address> or <DNS name>
<integer>
|
(none)
0
|
|
/SP/clients/
activedirectory/
alternateservers/n/cert
where n is 1-5
|
certstatus
clear_action
issuer
load_uri
serial_number
subject
valid_from
valid_until
version
|
<string>
true
<string>
tftp|ftp|scp
<string>
<string>
<string>
<string>
<string>
|
certificate not present
(none)
(none)
(none)
(none)
(none)
(none)
(none)
(none)
|
|
/SP/clients/
activedirectory/cert/
|
certstatus
clear_action
issuer
load_uri
serial_number
subject
valid_from
valid_until
version
|
<string>
true
<string>
tftp|ftp|scp
<string>
<string>
<string>
<string>
<string>
|
certificate not present
(none)
(none)
(none)
(none)
(none)
(none)
(none)
(none)
|
|
/SP/clients/
activedirectory/
dnslocatorqueries/n
where n is 1-5
|
service
|
<DOMAIN>
|
(none)
|
|
/SP/clients/dns
|
auto_dns
nameserver
retries
searchpath
timeout
|
enabled|disabled
<string>
<integer between 0 and 5>
<string>
<integer between 1 and 10>
|
disabled
(none)
(none)
(none)
(none)
|
|
/SP/clients/ldap
|
binddn
bindpw
defaultrole
address
port
searchbase
state
|
<username>
<string>
administrator|operator|a|u|c|r|o|s
<ipaddress>|none
<integer>
<string>
enable|disabled
|
(none)
(none)
o
(none)
389
(none)
disabled
|
|
/SP/clients/ldapssl
|
state
defaultrole
dnslocatormode
address
port
strictmode
optionalUserMapping
timeout
logdetail
|
enabled | disabled
administrator | operator | a| u | c| r | o | s
enabled | disabled
<ip address> or <DNS name>
<integer between 0-65535>
enabled | disabled
enabled | disabled
<integer>
none | high | medium | low |
trace
|
disabled
(none)
disabled
(none)
0
disabled
disabled
4
none
|
|
/SP/clients/
ldapssl/
admingroups/n
where n is 1-5
|
name
|
<string>
|
(none)
|
|
/SP/clients/
ldapssl/
opergroups/n
where n is 1-5
|
name
|
<string>
|
(none)
|
|
/SP/clients/
ldapssl/
userdomains/n
where n is 1-5
|
domain
|
<string>
|
(none)
|
|
/SP/clients/ldapssl/
customgroups/n
where n is 1-5
|
name
roles
|
<string>
administrator | operator | a | u| c | r | o | s
|
(none)
(none)
|
|
/SP/clients/ldapssl/
alternateserver/n
where n is 1-5
|
address
port
|
<string>
<integer>
|
(none)
0
|
|
/SP/clients/ldapssl/
alternateservers/n/cert
where n is 1-5
|
certstatus
clear_action
issuer
load_uri
serial_number
subject
valid_from
valid_until
version
|
<string>
true
<string>
tftp|ftp|scp
<string>
<string>
<string>
<string>
<string>
|
(none)
(none)
(none)
(none)
(none)
(none)
(none)
(none)
(none)
|
|
/SP/clients/ldapssl/
cert/
|
certstatus
clear_action
issuer
load_uri
serial_number
subject
valid_from
valid_until
version
|
<string>
true
<string>
tftp|ftp|scp
<string>
<string>
<string>
<string>
<string>
|
certificate not present
(none)
(none)
(none)
(none)
(none)
(none)
(none)
(none)
|
|
/SP/clients/
ldapssl/
cert/n
where n is 1-5
|
domain
|
<string>
|
(none)
|
|
/SP/clients/ntp/server/
[1|2]
|
address
|
<ipaddress>
|
(none)
|
|
/SP/clients/radius
|
defaultrole
address
port
secret
state
|
administrator|operator|a|u|c|r|o|s|none
<ipaddress>|none
<integer>
<string>|none
enable|disabled
|
operator
(none)
1812
(none)
disabled
|
|
/SP/clients/smtp
|
address
port
state
|
<ipaddress>
<integer>
enabled | disabled
|
IP address
25
enabled
|
|
/SP/clients/syslog[1|2]
|
address
|
<ipaddress>
|
IP address
|
|
/SP/config
|
dump_uri
load_uri
passphrase
|
tftp|ftp|sftp|scp|http|https
tftp|ftp|sftp|scp|http|https
<string>
|
(none)
(none)
(none)
|
|
/SP/diag
|
snapshot
|
(none)
|
(none)
|
|
/SP/network
|
commitpending
pendingipaddress
pendingdiscovery
pendingipgateway
pendingipnetmask
state
|
true
<ipaddress>|none
dhcp|static
<ipaddress>|none
<IP dotted decimal>
enabled | disabled
|
(none)
(none)
dhcp
(none)
10.8.255.255
enabled
|
|
/SP/network/ipv6
|
state
autoconfig
pending_static_ipaddress
commitpending
|
enabled | disabled
stateless | dhcpv6_stateless | dhcpv6_stateful | disable
<ipv6_address>
true
|
enabled
stateless
(none)
(none)
|
|
/SP/network/test
|
ping
ping6
|
<ipv4_address>
<ipv6_address>
|
(none)
(none)
|
|
/SP/preferences/banner
|
connect_message
login_message
login_message_acceptance
|
<string>
<string>
enabled | disabled
|
(none)
(none)
disabled
|
|
/SP/serial/external
|
commitpending
flowcontrol
pendingspeed
speed
|
true
none
<integer from list>
<integer from list>
|
(none)
(none)
9600
9600
|
|
/SP/serial/host
|
commitpending
pendingspeed
speed
|
true
<integer from list>
<integer from list>
|
(none)
9600
9600
|
|
/SP/
|
check_physical_presence
hostname
reset_to_defaults
system_contact
system_description
system_identifier
system_location
|
true|false
<string>
all|factory|none
<string>
<string>
<string>
<string>
|
(none)
(none)
(none)
(none)
(none)
(none)
(none)
|
Examples
-> set /SP/users/susan role=administrator
-> set /SP/clients/ldap state=enabled binddn=proxyuser bindpw=ez24get
show Command
Use the show command to display information about targets and properties.
Using the -display option determines the type of information shown. If you specify -display targets, then all targets in the namespace below the current target are shown. If you specify -display properties, all property names and values for the target are shown. With this option you can specify certain property names, and only those values are shown. If you specify -display all, all targets in the namespace below the current target are shown, and the properties of the specified target are shown. If you do not specify a -display option, the show command acts as if -display all were specified.
The -level option controls the depth of the show command and it applies to all modes of the -display option. Specifying -level 1 displays the level of the namespace where the object exists. Values greater than 1 return information for the target's current level in the namespace and the <specified value> levels below. If the argument is -level all, it applies to the current level in the namespace and everything below.
The -o|output option specifies the output and form of command output. ILOM only supports -o table, which displays targets and properties in tabular form.
The alias, show components, is a shortcut for the following CLI command:
-> show -o table -level all /SYS component state
The show components alias produces the same output as the above command. Thus, it enables you to restrict the table output to a single property below each target.
Syntax
show [options] [-display targets|properties|all] [-level value|all] target [propertyname]
Options
[-d|-display] [-l|level] [-o|output]
Targets and Properties
TABLE A-6 Targets and Properties for show Command
|
Valid Targets
|
Properties
|
|
/HOST/tpm
|
activate
enable
forceclear
|
|
/SYS
|
|
|
/SYS/DBP/HDDn
where n is a valid HDD slot
|
type
ipmi_name
fru_name
fru_manufacturer
fru_version
fru_serial_number
controller_id
disk_id
capacity
device_name
disk_type
wwn
raid_status
raid_ids
|
|
/STORAGE/raid/controller@od:00.0
where 00.0 is the ID for the controller
|
fru_manufacturer
fru_model
pci_vendor_id
pci_device_id
pci_subvendor_id
pci_subdevice_id
raid_levels
max_disks
max_raids
max_hot_spares
max_global_hot_spares
min_stripe_size
max_stripe_size
|
|
/STORAGE/raid/controller@od:00.0/
raid_id0
where 00.0 is the ID for the controller, and raid_id0 is the target RAID disk
|
level
status
disk_capacity
device_name
mounted
|
|
/STORAGE/raid/controller@od:00.0/
raid_id0/disk_id0
where 00.0 is the ID for the controller, and raid_id0 is the target RAID disk, and disk_id0 is the target disk
|
fru_manufacturer
fru_serial_number
fru_version
status
capacity
device_name
disk_type
wwn
raid_ids
system_drive_slot
|
|
/SP
|
|
|
/SP/alertmgmt/rules/
rulename
(rulename = 1 through 15)
|
community|username
destination
destination_port
event_class_filter
event_type_filter
level
snmp_version
type
|
|
/SP/cli
|
timeout
|
|
/SP/clients/
activedirectory
|
state
certfilestatus
defaultrole
getcertfile
address
logdetail
port
strictcertmode
timeout
|
|
/SP/clients/
activedirectory/
admingroups/n
where n is 1-5
|
name
|
|
/SP/clients/
activedirectory/
alternateservers/n
where n is 1-5
|
address
port
|
|
/SP/clients/
activedirectory/
alternateservers/n/cert
where n is 1-5
|
clear_action
issuer
load_uri
serial_number
subject
valid_from
valid_until
version
|
|
/SP/clients/
activedirectory/cert
|
certstatus
clear_action
issuer
load_uri
serial_number
subject
valid_from
valid_until
version
|
|
/SP/clients/
activedirectory/
customgroups/n
where n is 1-5
|
name
roles
|
|
/SP/clients/
activedirectory/
opergroups/n
where n is 1-5
|
name
|
|
/SP/clients/
activedirectory/
userdomains/n
where n is 1-5
|
domain
|
|
/SP/clients/dns
|
auto_dns
nameserver
searchpath
|
|
/SP/clients/ldap
|
binddn
bindpw
defaultrole
address
port
searchbase
state
|
|
/SP/clients/ldapssl
|
defaultrole
address
logdetail
port
optionalUserMapping
state
strictcertmode
timeout
|
|
/SP/clients/
ldapssl/
admingroups/n
where n is 1-5
|
name
|
|
/SP/clients/
ldapssl/
alternateservers/n
where n is 1-5
|
address
port
|
|
/SP/clients/
ldapssl/
alternateservers/n/cert
where n is 1-5
|
cert_status
clear_action
issuer
load_uri
serial_number
subject
valid_from
valid_until
version
|
|
/SP/clients/ldapssl/cert
|
certstatus
clear_action
issuer
load_uri
serial_number
subject
valid_from
valid_until
version
|
|
/SP/clients/
ldapssl/
customgroups/n
where n is 1-5
|
name
roles
|
|
/SP/clients/
ldapssl/
opergroups/n
where n is 1-5
|
name
|
|
/SP/clients/
ldapssl/
userdomains/n
where n is 1-5
|
domain
|
|
/SP/clients/ntp/server/[1|2]
|
address
|
|
/SP/clients/radius
|
address
port
secret
state
|
|
/SP/clients/smtp
|
port
state
|
|
/SP/clock
|
datetime
usentpserver
uptime
timezone
|
|
/SP/config
|
dump_uri
load_uri
passphrase
|
|
/SP/console
|
escapechars
|
|
/SP/console/history
|
line_count
pause_count
start_from
|
|
/SP/diag/snapshot
|
dataset
dump_uri
result
|
|
/SP/firmware
|
load_uri
|
|
/SP/logs/event
|
clear
|
|
/SP/network
|
commitpending
dhcp_server_ip
ipaddress
ipdiscovery
ipgateway
ipnetmask
macaddress
pendingipaddress
pendingdiscovery
pendingipgateway
pendingipnetmask
state
|
|
/SP/network/ipv6
|
state
autoconfig
dhcpv6_server_duid
link_local_ipaddress
static_ipaddress
ipgateway
pending_static_ipaddress
dynamic_ipaddress_1
|
|
/SP/network/test
|
ping
ping6
|
|
/SP/powermgmt
|
actual_power
permitted_power
available_power
|
|
/SP/preferences/banner
|
connect_message
login_message
login_message_acceptance
|
|
/SP/serial/external
|
flowcontrol
speed
|
|
/SP/serial/host
|
commitpending
pendingspeed
speed
|
|
/SP/services/http
|
port
secureredirect
servicestate
|
|
/SP/services/https
|
cert_status
servicestate
|
|
/SP/services/https/ssl
|
cert_status
|
|
/SP/services/https/ssl/default_cert
|
issuer
subject
valid_from
valid_until
|
|
/SP/services/https/ssl/custom_cert
|
clear_action
issuer
load_uri
subject
valid_from
valid_until
|
|
/SP/services/https/ssl/custom_key
|
key_present
load_uri
clear_action
|
|
/SP/services/ipmi
|
servicestate
|
|
/SP/services/kvms
|
mousemode
servicestate
|
|
/SP/services/servicetag
|
passphrase
product_urn
state
|
|
/SP/services/snmp
|
engineid
mibs
port
sets
v1
v2c
v3
servicestate
|
|
/SP/services/snmp/communities/private
|
permissions
|
|
/SP/services/snmp/communities/public
|
permissions
|
|
/SP/services/snmp/users/username
|
password
role
|
|
/SP/services/ssh
|
state
|
|
/SP/services/ssh/keys/dsa
|
fingerprint
length
privatekey
publickey
|
|
/SP/services/ssh/keys/rsa
|
fingerprint
length
privatekey
publickey
|
|
/SP/services/sso
|
state
|
|
/SP/sessions/sessionid
|
username
starttime
type
mode
|
|
/SP/users/username
|
role
password
|
|
/SP/users/username/ssh/keys/1
|
fingerprint
algorithm
load_uri
clear_action
embedded_comment
bit_length
|
|
/SP/users/username/service
|
service_password
service_password_expires
|
|
/SP/users/username/escalation
|
escalation_password
escalation_password_expires
|
Examples
-> show /SP/users/user1
-> show /SP/clients -level2
-> show components
start Command
Use the start command to turn on the target or to initiate a connection to the host console. Using the -script option eliminates the prompt for a yes or no confirmation and the command acts as if yes were specified.
Syntax
start [options] target
Options
[-h|help] [-script]
Targets
TABLE A-7 Targets for start Command
|
Valid Targets
|
Description
|
|
/SYS or /CH
|
Starts (powers on) the system or chassis.
|
|
/SP/console
|
Starts an interactive session to the console stream.
|
Examples
-> start /SP/console
-> start /SYS
stop Command
Use the stop command to shut down the target or to terminate another user's connection to the host console. You will be prompted to confirm a stop command. Eliminate this prompt by using the -script option. The -f|force option specifies that the action will be performed immediately.
Syntax
stop [options] [-script] target
Options
[-f|force] [-h|help]
Targets
TABLE A-8 Targets for stop Command
|
Valid Targets
|
Description
|
|
/SYS or /CH
|
Perform an orderly shutdown, followed by a power off of the specified system or chassis. Use the -f|-force option to skip the orderly shutdown and force an immediate power off.
|
|
/SP/console
|
Terminate another user's connection to the host console.
|
Examples
-> stop /SP/console
-> stop -force /SYS
version Command
Use the version command to display ILOM version information.
Syntax
version
Options
[-h|help]
Example
-> version
version SP firmware version: 3.0.0
SP firmware build number: 4415
SP firmware date: Mon Mar 28 10:39:46 EST 2008
SP filesystem version: 0.1.9
|
| Oracle Integrated Lights Out Manager (ILOM) 3.0 CLI Procedures Guide
|
820-6412-12
|
   
|
Copyright © 2010, Oracle and/or its affiliates. All rights reserved.