To Install the Windows XP Operating System

1. Make sure that you have completed all of the requirements listed in Windows XP Installation Requirements.

2. Power cycle your server.

   The BIOS POST process begins.

3. Set the System BIOS as needed. If needed, set the System BIOS and configure disks for Intel AHCI SATA RAID. See Setting the System BIOS and Configuring Disks for Intel AHCI SATA or RAID.

   • If you are using the optional LSI 1041E HBA, set the hard disk mode to IDE.

   • The default mode is AHCI. If the mode was changed and you are using SATA or RAID, set the System BIOS and configure disks for Intel AHCI SATA RAID. See Setting the System BIOS and Configuring Disks for Intel AHCI SATA or RAID.

4. Do one of the following:

   • Install Windows XP manually

   • Install Windows XP using the XpReburn script