Seeking a Solution

After identifying the problem, you are ready to do some investigation.

The following topics are addressed in this section:

• Verify System Configuration

• Evaluate Messages

• Examine Log Files

• See if the Problem has been Solved Before

• Search the Product Documentation

• Search the Knowledge Base

• Search or Participate in the Online Forum

• Contact Support

Verify System Configuration

Sometimes the most obvious solutions are overlooked, and so the first step is to verify the system configuration. Refer to the Sun Java System Web Server 7.0 Update 6 Release Notes for the most up-to-date system requirements and dependencies.

Evaluate Messages

Messages generally include information about the attempted action, the outcome of the action, and, if applicable, the cause of jeopardy or failure.

Types of Messages

The log files contain the following general types of message entries:

• Error – These messages mark critical failures that cause status to be reported as Failed. Error messages generally provide detailed information about the nature and the cause of the problem that occurred.

• Warning – These messages mark non-critical failures. Warning messages generally contain information about the cause and the nature of the failure, and also provide possible remedies.

• Information – These messages mark normal completion of particular tasks.

Error Messages

A problem is often accompanied by an error message that prevents the application from proceeding.

• In some cases, the message is very clear about what is wrong and what needs to be done, if anything, to fix it. For example the 'Deployment Pending' link that appears on the administration console whenever an instance configuration is modified.

  In this case, the message gives clear guidance and the problem can be disregarded.

• Sometimes an error message gives only general information about the problem or solution, or suggests multiple possibilities.

  In this case, the problem is not obvious, or there might be multiple things wrong. You might have to consider various possibilities and perhaps a number of solutions. If the proposed fix is time consuming or costly, take steps to ensure that the fix is likely to be correct before actually doing anything.

• Some error messages are either not helpful or provide little guidance.

  In this case, there is very little information to go on. It is especially important to identify the exact situation that caused the error, and what the symptoms are before proceeding.

  For descriptions of all the Web Server error messages, refer to the later sections in this guide.

Examine Log Files

A number of the Web Server subsystems create log files and log their events to these files. The primary purpose of these log files is to provide troubleshooting information.

Web Server Error Logs are the first place you should look for information, when you need to troubleshoot a runtime issue. For issues related to installation, see the installation log files.

In addition to the message text, a logged message provides the following information:

• Date and time of the event

• Log level for the event — Web Server-specified log level ID or name

• Process identifier (PID) — PID of the Web Server process

• (optional) Virtual server identifier (VSID) — VSID that generated the message

• Message identifier (MID) — subsystem and a four digit integer

• Message data

  The specific logs associated with each Web Server problem area are discussed in the associated chapters of this manual.

Log Levels

The Web Server has many log levels that can be set in the Administration GUI (FINEST, FINER, FINE, CONFIG, INFO, WARNING, SEVERE, ALERT, and FATAL). All messages are logged when the log level is set to FINEST and only serious error messages appear if the log level is set to FATAL.

Note that the more detailed log levels (FINEST, FINER, FINE) can generate high volumes of log information for certain events, which may make it appear at first glance that there is an error condition when in fact there is not.

All messages with a log level less than the default level of INFO (FINEST, FINER, FINE, and CONFIG) provide information related to debugging and must be specifically enabled. Instructions for doing this are contained in the Sun Java System Web Server Administrator's Guide.

In addition to the standard JDK log levels, the Web Server has added log levels designed to map more intuitively to the Web Server log file (server.log) and to tightly integrate with Solaris. The log levels ALERT and FATAL are specific to the Web Server and are not implemented in the JDK1.4 logging API.

For information on the event log mechanism used in the Microsoft Windows operating environment, refer to the Windows help system index using the keywords Event Logging. If you choose to send logs to the Windows server.log file, only messages with a log level of INFO, WARNING, SEVERE, ALERT, or FATAL are logged to the Windows Event Log.

Log Options

The Administration GUI provides the following two logging options:

• Option 1 — Log stdout (System.out.print) content to the event log

• Option 2 — Log stderr (System.err.print) content to the event log

  When these options are set, stdout and stderr messages are written to the server.log file. (The event log is a syslog daemon on Solaris and Event Log on Microsoft Windows.)

  If the above options are not set:

• Anything written to stdout or stderr (that is, using System.out or System.err) will not appear in the logs.

• Messages logged with the JDK logger will appear in the logs.

• Messages written to stdout or stderr appear with the INFO level, but do not have a message ID.

See if the Problem has been Solved Before

A good initial step is to scan this Troubleshooting Guide to see if the problem is addressed here. If so, select the appropriate solution. Many of the solutions contain references to other documents in the Web Server document collection for additional details, explanations, or examples.

Search the Product Documentation

Start by reading the Release Notes for the version of the product you are troubleshooting.

The documentation for this Web Server product release is available at Sun Java System Web Server 7.0 Update 6 Documentation Center.

Search the Knowledge Base

The Knowledge Base is a collection of articles on product issues that provide information helpful for troubleshooting. To access the Knowledge Base:

To search the Knowledge Base

1. Go to SunSolve.

2. Under SunSolve Collections, click the Search Collections link.

3. Select the checkbox for the collection(s) to search.

4. Click Next.

5. Enter the search criteria.

6. Click Go.

Search or Participate in the Online Forum

Browse directly in any of the online forums, or log in and register to start posting messages. The Web Server online forum is available at: http://swforum.sun.com/jive/index.jsp?cat=7

Contact Support

When necessary, gather together the information you have acquired and contact technical support at http://www.sun.com/service/contacting.