Skip Navigation Links | |
Exit Print View | |
![]() |
SPARC Enterprise M3000/M4000/M5000/ M8000/M9000 Servers Product Notes for XCP Version 1115 |
Hardware, Firmware, and Software Compatibility
Obtaining Oracle Solaris Patches
2. Information About XCP 1115 Firmware
XCP Support for RAID-Capable IOUA Cards in M8000/M9000 Servers
Updating the OpenBoot PROM Firmware
Upgrading From a Version Earlier Than XCP 1050
Upgrading an M8000/M9000 Server From a Version Earlier Than XCP 1082
Domain Restart Required After Certain Type of XCP Upgrade
XCP Functionality Issues and Limitations
XCP Known Issues (CRs) and Workarounds
COD Warning and Violation Messages
Sun Flash Accelerator F20 PCIe Card
Identifying Degraded Memory in a System
To Identify Degraded Memory in a System
Enabling the Web Console SMF Service
To Enable the Web Console SMF Service
Software Functionality Issues and Limitations
Oracle Solaris OS Issues (CRs) and Workarounds
Known Issues in All Supported Oracle Solaris Releases
Issues Fixed in Oracle Solaris 10 8/11
Issues Fixed in Oracle Solaris 10 9/10
Issues Fixed in Oracle Solaris 10 10/09
Issues Fixed in Oracle Solaris 10 5/09
Issues Fixed in Oracle Solaris 10 10/08
Issues Fixed in Oracle Solaris 10 5/08
Issues Fixed in Oracle Solaris 10 8/07
Software Documentation Updates
Important Notes, Issues and Workarounds – All M-Series Servers
Booting From a WAN Boot Server
Booting Multiple Systems From a Single J4200 JBOD Storage Array
Notes on the Use of USB Memory
Hardware Functionality Issues and Limitations
Important Notes, Issues and Workarounds – M3000 Servers Only
Patches for Emulex PCI Express (PCIe) Cards
Daughter Card Installed on the MBU_A
Hardware Functionality Issues and Limitations
Important Notes, Issues and Workarounds – M4000/M5000 and M8000/M9000 Servers Only
For M4000/M5000 Servers Determine if any CPUM is Licensed Under Capacity On Demand (COD)
For M8000/M9000 Servers Determine if any CPU is Licensed Under COD
M9000 Server Installation Area
Warning Label on M9000 Server AC Section
Sun Crypto Accelerator 6000 Cards
Patches for Emulex PCI Express (PCIe) Cards
Hardware Functionality Issues and Limitations
Hardware Documentation Updates for the M3000 Server
In addition to the standard default login, M-Series servers are delivered with a temporary login called admin to enable remote initial login through a serial port. The admin user privileges are fixed to useradm and cannot be changed. You cannot log in as temporary admin using the standard UNIX user name and password authentication or SSH public key authentication. The temporary admin account has no password, and one cannot be added for it.
The temporary admin account is disabled after someone logged in as the default user or as temporary admin has successfully added the first user with valid password and privileges.
Also note that you cannot use the following user account names, as they are reserved for system use: adm, admin, apache, bin, daemon, default, ldap, nobody, ntp, operator, proxyuser, root, rpc, rpcuser, and sshd.