You receive different output messages from the commands you use to create default services and to set up the control (primary) domain depending on your platform:
Sun UltraSPARC T1 processors
Sun UltraSPARC T2 and T2 Plus processors
You receive the following notice after the setup commands for the primary domain if you are using a server with a Sun UltraSPARC T1 processor:
Notice: the LDom Manager is running in configuration mode. Any configuration changes made will only take effect after the machine configuration is downloaded to the system controller and the host is reset. |
You receive the following message after the first operation that cannot be performed dynamically on any device or for any service on the primary domain if you are using a server with a Sun UltraSPARC T2 or T2 Plus processor:
Initiating delayed reconfigure operation on LDom primary. All configuration changes for other LDoms are disabled until the LDom reboots, at which time the new configuration for LDom primary will also take effect. |
You receive the following notice after every subsequent operation on the primary domain until reboot if you are using a server with a Sun UltraSPARC T2 or T2 Plus processor:
Notice: LDom primary is in the process of a delayed reconfiguration. Any changes made to this LDom will only take effect after it reboots. |