How to Change RAID-1 Volume Options

Before You Begin

Check About RAID-1 Volume Options.

Steps

1. Make sure that you have root privilege and that you have a current backup of all data.

2. Use one of the following methods to change the RAID-1 options.

   • From the Enhanced Storage tool within the Solaris Management Console, open the Volumes node. Choose the mirror. Then, choose Action⇒Properties. Follow the onscreen instructions. For more information, see the online help.

   • Use the metaparam command to display and change a mirror's options.

     # metaparam [mirror options] mirror

     See About RAID-1 Volume Options for a description of mirror options. Also, see the metaparam(1M) man page.

Example 11–14 Changing a RAID-1 Volume's Read Policy

# metaparam -r geometric d30
# metaparam d30
d30: mirror current parameters are:
    Pass: 1
    Read option: geometric (-g)
    Write option: parallel (default)

In this example, the -r option changes a mirror's read policy to geometric.

Example 11–15 Changing a RAID-1 Volume's Write Policy

# metaparam -w serial d40
# metaparam d40
d40: mirror current parameters are:
    Pass: 1
    Read option: roundrobin (default)
    Write option: serial (-S)

In this example, the -w option changes a mirror's write policy to serial.

Example 11–16 Changing a RAID-1 Volume's Pass Number

# metaparam -p 5 d50
# metaparam d50
d50: mirror current parameters are:
    Pass: 5
    Read option: roundrobin (default)
    Write option: parallel (default)

In this example, the -p option changes a mirror's pass number to 5.