IPQoS Configuration for Systems With VLAN Devices

This section introduces a simple network scenario that shows how to implement IPQoS on systems with VLAN devices. The scenario includes two IPQoS systems, machine1 and machine2, that are connected by a switch. The VLAN device on machine1 has the IP address 10.10.8.1. The VLAN device on machine2 has the IP address 10.10.8.3.

The following IPQoS configuration file for machine1 shows a simple solution for marking traffic through the switch to machine2.

Example 37–2 IPQoS Configuration File for a System With a VLAN Device

fmt_version 1.0
action {
        module ipgpc
	      name ipgpc.classify

        filter {
                name myfilter2
                daddr 10.10.8.3
                class myclass
        }

        class {
                name myclass
                next_action mark4
        }
}

action {
        name mark4
        module dlcosmk
        params {
                cos 4
                next_action continue
		global_stats true
        }
}

In this configuration, all traffic from machine1 that is destined for the VLAN device on machine2 is passed to the dlcosmk marker. The mark4 marker action instructs dlcosmk to add a VLAN mark to datagrams of class myclass with a CoS of 4. The user-priority value of 4 indicates that the switch between the two machines should give controlled load forwarding to myclass traffic flows from machine1.