Before you use the nisclient script, be sure the following prerequisites have been met.
The domain must have already been configured and its master server must be running.
The master server of the domain's tables must be populated. (At a minimum, the hosts or, if you are running a system prior to the Solaris 10 7/07 release, the ipnodes table must have an entry for the new client machine.)
You must be logged in as superuser on the machine that is to become an NIS+ client. In this example, the new client machine is named client1.
You need the following information to run nisclient.
The domain name.
The default Secure RPC password (nisplus).
The root password of the machine that will become the client.
The IP address of the NIS+ server (in the client's home domain).
If DES authentication is used, note the Diffie-Hellman key length used on the master server. Use nisauthconf to ascertain the master server Diffie-Hellman key length.
Optionally, if using DES authentication, specify the Diffie-Hellman key length.
On the master server, type
Use the output as the arguments when running the nisauthconf command on the client. For example, if nisauthconf on the master server produces
type the following command on the client machine
nisauthconf dh640dh-0 des
Type the following command to initialize the new client on the new client machine.
The -i option initializes a client. The -d option specifies the new NIS+ domain name. (If the domain name is not specified, the default is the current domain name.) The -h option specifies the NIS+ server's host name.
client1# nisclient -i -d doc.com. -h master1 Initializing client client1 for domain “doc.com.”. Once initialization is done, you will need to reboot your machine. Do you want to continue? (type 'y' to continue, 'n' to exit this script)
Typing n exits the script. The script prompts you only for the root server's IP address if there is no entry for it in the client's /etc/hosts or, prior to the Solaris 10 7/07 release, in the client's /etc/inet/ipnodes file.
Do you want to continue? (type 'y' to continue, 'n' to exit this script) y Type server master1's IP address:
Type the correct IP address, and press Return.
This example uses the hypothetical address 184.108.40.206.
Type server master1's IP address: 220.127.116.11 setting up the domain information... setting up the name service switch information... At the prompt below, type the network password (also known as the Secure-RPC password) that you obtained either from your administrator or from running the nispopulate script. Please enter the Secure-RPC password for root:
Type the Secure RPC password (also known as the network password) only if the Secure RPC password differs from the root login password.
In this case, use the default, nisplus.
The password does not echo on the screen. If you mistype it, you are prompted for the correct one. If you mistype it twice, the script exits and restores your previous network service. If this happens, try running the script again.
Please enter the login password for root:
Type the root password for this client machine.
The password does not echo on the screen. (If the Secure RPC password and the root login password happen to be the same, you will not be prompted for the root login password.)
Typing the root password changes the credentials for this machine. The RPC password and the root password are now the same for this machine.
Please enter the login password for root: Wrote secret key into /etc/.rootkey Your network password has been changed to your login one. Your network and login passwords are now the same. Client initialization completed!! Please reboot your machine for changes to take effect.
Reboot your new client machine.
Your changes do not take effect until you reboot the machine.
You can now have the users of this NIS+ client machine add themselves to the NIS+ domain.