| | | | |
| P |
| |
| | packaging (  ) |
| |
| | partial store ordering ( ) |
| |
| | PCI bus ( ) |
| | | configuration address space ( ) |
| | | configuration base address registers ( ) |
| | | hardware configuration files ( ) |
| | | I/O address space ( ) |
| | | memory address space ( ) |
| |
| | PCI configuration functions, alternate access mechanisms ( ) |
| |
| | PCI devices ( ) |
| |
| | PCI dual address cycles ( ) |
| |
| | pci_ereport_post() function ( ) ( ) ( ) |
| |
| | pci_ereport_setup() function ( ) ( ) |
| |
| | pci_ereport_teardown() function ( ) ( ) |
| |
| | physical DMA ( ) |
| |
| | physio() function, description of ( ) |
| |
| | pipe, alternate setting ( ) |
| |
| | pipes |
| | | closing ( ) |
| | | default control ( ) ( ) |
| | | flushing ( ) |
| | | mutex initialization ( ) |
| | | opening ( ) |
| | | policy ( ) |
| | | USB device communication ( ) |
| | | USB devices ( ) |
| | | use before attach() ( ) |
| |
| | pixel depth mode ( ) |
| |
| | pkgadd command ( ) |
| |
| | pm_busy_component() function ( ) ( ) |
| |
| | pm_idle_component() function ( ) ( ) |
| |
| | pm_lower_power() function ( ) |
| |
| | pm_raise_power() function ( ) ( ) |
| |
| | .po message files ( ) |
| |
| | polled I/O interfaces ( ) ( ) |
| |
| | postmortem debugging ( ) |
| |
| | power() entry point ( ) ( ) |
| |
| | power.conf file, See /etc/power.conf file |
| |
| | power cycle ( ) |
| |
| | power management |
| | | See also device power management | |
| | | See also system power management | |
| | | flow of control ( ) |
| | | USB devices ( ) |
| |
| | power management functions ( ) |
| | | deprecated ( ) |
| |
| | Predictive Self-Healing ( ) |
| | | See also fault management | |
| |
| | prefix |
| | | unique prefix for driver symbols ( ) ( ) |
| |
| | print() entry point, block drivers ( ) |
| |
| | printing functions ( ) |
| |
| | printing messages ( ) |
| |
| | probe() entry point |
| | | description of ( ) |
| | | SCSI target drivers ( ) |
| |
| | processor issues |
| | | SPARC ( ) ( ) ( ) |
| | | x86 ( ) |
| |
| | programmed I/O ( ) |
| | | use with DDI access routines ( ) |
| |
| | programmed I/O functions ( ) |
| | | deprecated ( ) |
| |
| | PROM commands ( ) |
| |
| | prop_op() entry point, description of ( ) |
| |
| | properties |
| | | class property ( ) |
| | | ddi_prop_op ( ) |
| | | device node name property ( ) |
| | | LDI ( ) |
| | | nblocks property ( ) |
| | | Nblocks property ( ) |
| | | nblocks property ( ) |
| | | Nblocks property ( ) |
| | | no-involuntary-power-cycles ( ) |
| | | overview ( ) ( ) |
| | | pm-hardware-state property ( ) ( ) ( ) |
| | | prtconf ( ) |
| | | reg property ( ) |
| | | removable-media ( ) |
| | | reporting device properties ( ) |
| | | SCSI HBA properties ( ) |
| | | SCSI target driver ( ) |
| | | size property ( ) |
| | | types of ( ) |
| |
| | property functions ( ) |
| |
| | prtconf command |
| | | displaying device names ( ) |
| | | displaying interfaces ( ) |
| | | displaying kernel device usage information ( ) |
| | | displaying properties ( ) |
| | | displaying the bound driver ( ) |
| | | displaying the device tree ( ) |
| |
| | pseudo device driver ( ) |
| |
| | putnext() function ( ) |
