if_mpadm(1M)

Name | Synopsis | Description | Options | Examples | Attributes | See Also | Diagnostics

Name

if_mpadm– change operational status of interfaces within a multipathing group

Synopsis

/usr/sbin/if_mpadm -d interface_name

/usr/sbin/if_mpadm -r interface_name

Description

Use the if_mpadm utility to change the operational status of interfaces that are part of an IP multipathing group. If the interface is operational, you can use if_mpadm -d to detach or off-line the interface. If the interface is off-lined, use if_mpadm -r to revert it to its original state.

When a network interface is off-lined, all network access fails over to a different interface in the IP multipathing group. Any addresses that do not failover are brought down. Network access includes unicast, broadcast, and multicast for IPv4 and unicast and multicast for IPv6. Addresses marked with IFF_NOFAILOVER do not failover. They are marked down. After an interface is off-lined, the system will not use the interface for any outbound or inbound traffic, and the interface can be safely removed from the system without any loss of network access.

The if_mpadm utility can be applied only to interfaces that are part of an IP multipathing group.

Options

The if_mpadm utility supports the following options:

-d interface_name

Detach or off-line the interface specified by interface_name.

-r interface_name

Reattach or undo the previous detach or off-line operation on the interface specified by interface_name. Unless the -d option was used to detach or off-line the interface, this option will fail.

Examples

---

Example 1 Detaching an Interface




Use the following command to off-line or detach the interface. All network access will failover from hme0 to other interfaces in the same IP multipathing group. If no other interfaces are in the same group, the operation will fail.

example% if_mpadm -d hme0

---

---

Example 2 Reattaching an Off-line Interface




Use the following command to undo the previous operation. Network access will failback to hme0.

example% if_mpdadm -r hme0

---

Attributes

See attributes(5) for descriptions of the following attributes:

ATTRIBUTE TYPE	ATTRIBUTE VALUE
Availability	SUNWcsu
Interface Stability	Unstable

See Also

ifconfig(1M), in.mpathd(1M), attributes(5)

Diagnostics

off-line failed as there is no other functional interface available in the multipathing group for failing over the network access.

Description:

This message means that other interfaces in the group are failed over already or the multipathing configuration was not suitable for completing a failover.




off-line cannot be undone because multipathing configuration is not consistent across all the interfaces in the group.

Description:

This message means that some interfaces in the IP multipathing group are not configured consistently with other interfaces in the group, for example, one of the interfaces in the group does not have an IFF_NOFAILOVER address.

SunOS 5.10  Last Revised 3 Sep 2002

Name | Synopsis | Description | Options | Examples | Attributes | See Also | Diagnostics