The following sections contain additional reference information for administering GRUB in the Oracle Solaris OS.
To thoroughly grasp GRUB concepts, an understanding of the following terms is essential.
Some of the terms that are described in this list are not exclusive to GRUB based booting.
A collection of critical files that is used to boot the Oracle Solaris OS. These files are needed during system startup before the root file system is mounted. Multiple boot archives are maintained on a system:
A primary boot archive is used to boot the Oracle Solaris OS on an x86 based system.
A failsafe boot archive that is used for recovery when a primary boot archive is damaged. This boot archive starts the system without mounting the root file system. On the GRUB menu, this boot archive is called failsafe. The archive's primary purpose is to regenerate the primary boot archives, which are usually used to boot the system.
The first software program that runs after you power on a system. This program begins the booting process.
See boot archive.
GNU GRand Unified Bootloader (GRUB) is an open-source boot loader with a menu interface. The menu displays a list of the operating systems that are installed on a system. GRUB enables you to easily boot these various operating systems, such as the Oracle Solaris OS, Linux, or Windows.
A boot menu that lists the operating systems that are installed on a system. From this menu, you can easily boot an operating system without modifying the BIOS or fdisk partition settings.
A submenu of the GRUB main menu. GRUB commands are displayed on this submenu. These commands can be edited to change boot behavior.
A configuration file that lists all the operating systems that are installed on a system. The contents of this file dictate the list of operating systems that is displayed in the GRUB menu. From the GRUB menu, you can easily boot an operating system without modifying the BIOS or fdisk partition settings.
A minimal, bootable root (/) file system that resides on the Solaris installation media. A miniroot consists of the Solaris software that is required to install and upgrade systems. On x86 based systems, the miniroot is copied to the system to be used as the failsafe boot archive. See boot archive for details about the failsafe boot archive.
See boot archive.
GRUB consists of the following functional components:
stage1 – Is an image that is installed on the first sector of the fdisk partition. You can optionally install stage1 on the master boot sector by specifying the -m option with the installgrub command. See the installgrub(1M) man page and Disk Management in the GRUB Boot Environment in System Administration Guide: Devices and File Systems for more information.
stage2 – Is an image that is installed in a reserved area in the fdisk partition. The stage2 image is the core image of GRUB.
menu.lst file – Is typically located in the /boot/grub directory on systems with a UFS root and in the /pool-name/boot/grub directory on systems with a ZFS root. This file is read by the GRUB stage2 file. For more information, see the section, x86: Modifying Boot Behavior by Editing the menu.lst File.
You cannot use the dd command to write stage1 and stage2 images to disk. The stage1 image must be able to receive information about the location of the stage2 image that is on the disk. Use the installgrub command, which is the supported method for installing GRUB boot blocks.
GRUB uses device-naming conventions that are slightly different from previous Solaris releases. Understanding the GRUB device-naming conventions can assist you in correctly specifying drive and partition information when you configure GRUB on your system.
The following table describes the GRUB device-naming conventions for this Oracle Solaris release.
Table 15–1 Conventions for GRUB Devices
Device Name |
Description |
---|---|
(fd0) |
First diskette |
(fd1) |
Second diskette |
(nd) |
Network device |
(hd0,0) |
First fdisk partition on first hard disk |
(hd0,1) |
Second fdisk partition on first hard disk |
(hd0,0,a), |
Slice a on first fdisk partition on first hard disk |
(hd0,0,b) |
Slice b on first fdisk partition on first hard disk |
All GRUB device names must be enclosed in parentheses.
For more information about fdisk partitions, see Guidelines for Creating an fdisk Partition in System Administration Guide: Devices and File Systems.
Starting with the Solaris 10 10/08 release, the findroot command replaces the root command that was previously used by GRUB. The findroot command provides enhanced capabilities for discovering a targeted disk, regardless of the boot device. The findroot command also supports booting from a ZFS root file system.
The following is a description of the device naming convention that is used by the findroot command for various GRUB implementations:
Oracle Solaris Live Upgrade:
findroot (BE_x,0,a) |
The x variable is the name of the boot environment.
Standard system upgrades and new installations for systems with ZFS support:
findroot(pool_p,0,a) |
The p variable is the name of the root pool.
Standard system upgrades and new installations for systems with UFS support:
findroot (rootfsN,0,a) |
The N variable is an integer number that starts at 0.
This section describes how multiple operating systems that are on the same disk are supported with GRUB. The following is an example of an x86 based system that has the Solaris 10 10/08 OS, the Solaris 9 OS, Linux, and Windows installed on the same disk.
Table 15–2 Sample GRUB Menu Configuration
Operating System |
Location on Disk |
---|---|
Windows |
fdisk partition 0 |
Linux |
fdisk partition 1 |
Oracle Solaris |
fdisk partition 2 |
Solaris 9 OS |
Slice 0 |
Solaris 10 10/08 OS |
Slice 3 |
Based on the preceding information, the GRUB menu would look like the following:
title Oracle Solaris 10 findroot (pool_rpool,0,a) kernel$ /platform/i86pc/multiboot -B $ZFS-BOOTFS module /platform/i86pc/boot_archive title Solaris 9 OS (pre-GRUB) root (hd0,2,a) chainloader +1 makeactive title Linux root (hd0,1) kernel <from Linux GRUB menu...> initrd <from Linux GRUB menu...> title Windows root (hd0,0) chainloader +1 |
The Oracle Solaris slice must be the active partition. Also, do not indicate makeactive under the Windows menu. Doing so causes the system to boot Windows every time. Note that if Linux has installed GRUB on the master boot block, you cannot access the Oracle Solaris boot option. The inability to access the Solaris boot option occurs whether or not you designate it as the active partition.
In this case, you can do one of the following:
Chain-load from the Linux GRUB by modifying the menu on Linux.
Chain-loading is a mechanism for loading unsupported operating systems by using another boot loader.
Replace the master boot block with the Solaris GRUB by running the installgrub command with the -m option:
# installgrub -m /boot/grub/stage1 /boot/grub/stage2 /dev/rdsk/root-slice |
See the installgrub(1M) man page for more information.
For information about the Oracle Solaris Live Upgrade boot environment, see Oracle Solaris 10 9/10 Installation Guide: Solaris Live Upgrade and Upgrade Planning.
In Oracle Solaris 10, GRUB uses multiboot. The contents of the menu.lst file vary, depending on the Oracle Solaris release you are running, the installation method that is used, and whether you are booting the system from an Oracle Solaris ZFS root or a UFS root.
Oracle Solaris ZFS boot support for GRUB
If you are running a supported Oracle Solaris release, you can choose to boot from an Oracle Solaris ZFS or a UFS file system. For a description of the menu.lst file and an example, see Description of the menu.lst File (ZFS Support).
GRUB UFS boot support
For a description of the menu.lst file and an example, see Description of the menu.lst File (UFS Support).
The following are various examples of a menu.lst file for a boot environment that contains a ZFS boot loader:
Because the miniroot is mounted as the real root file system, the entry for failsafe booting in the menu.lst file does not change to the ZFS bootfs property, even if the failsafe archive is read from a ZFS dataset. The ZFS dataset is not accessed after the boot loader reads the miniroot.
title Solaris 10 5/08 s10x_nbu6wos_nightly X86 findroot (pool_rpool,0,a) kernel$ /platform/i86pc/multiboot -B $ZFS-BOOTFS module /platform/i86pc/boot_archive title Solaris failsafe findroot (pool_rpool,0,a) kernel /boot/multiboot kernel/unix -s -B console=ttyb module /boot/x86.miniroot-safe |
title be1 findroot (BE_be1,0,a) bootfs rpool/ROOT/szboot_0508 kernel$ /platform/i86pc/multiboot -B $ZFS-BOOTFS module /platform/i86pc/boot_archive title be1 failsafe findroot (BE_be1,0,a) kernel /boot/multiboot kernel/unix -s -B console=ttyb module /boot/x86.miniroot-safe |
The following are examples of a menu.lst file on a system that supports booting from UFS.
title Solaris 10 5/08 s10x_nbu6wos_nightly X86 findroot (pool_rpool,0,a) kernel /platform/i86pc/multiboot module /platform/i86pc/boot_archive title Solaris failsafe findroot (rootfs0,0,a) kernel /boot/multiboot kernel/unix -s -B console-ttyb module /boot/x86.miniroot-safe |
title be1 findroot (BE_be1,0,a) kernel /platform/i86pc/multiboot module /platform/i86pc/boot_archive title be1 failsafe findroot (BE_be1,0,a) kernel /boot/multiboot kernel/unix -s -B console=ttyb module /boot/x86.miniroot-safe |