Normally, you specify a tape drive by its logical unit number, which can run from 0 to n. The following table describes how to specify tape device names with a rewind or a no-rewind option.
Table 29–3 Specifying Rewind or No-Rewind for a Tape Drive
Drive and Rewind Value |
Use This Option |
---|---|
First drive, rewind |
/dev/rmt/0 |
First drive, no rewind |
/dev/rmt/0n |
Second drive, rewind |
/dev/rmt/1 |
Second drive, no rewind |
/dev/rmt/1n |