test

System Administration Guide: Devices and File Systems

ProcedureHow to Logically Connect a USB Device

Use this procedure to logically connect a USB device that was previously logically disconnected or unconfigured.

  1. Become superuser.

  2. Connect a USB device.

    For example:


    # cfgadm -c configure usb0/4.7

  3. Verify that the device is connected.

    For example:


    # cfgadm usb0/4.7
Ap_Id                  Type         Receptacle  Occupant    Condition
usb0/4.7               usb-storage  connected   configured  ok

    The device is now available and visible to the system.