If you are using the Solaris 10 3/05 release, use this procedure.
Starting with the Solaris 10 1/06 release, the Solaris Device Configuration Assistant software is no longer used to boot a system. A GRUB menu is provided during the installation procedure that enables the boot process. For instructions, see x86: To Create a Profile Diskette With GRUB.
This procedure assumes that the system is running Volume Manager. If you are not using Volume Manager to manage diskettes, CDs, and DVDs, refer to System Administration Guide: Devices and File Systems for detailed information about managing removable media without Volume Manager.
Log in as superuser on an x86 based system to which a diskette drive is attached.
Insert the Solaris 10 3/05 Device Configuration Assistant diskette into the diskette drive (usually drive A). You use this diskette as the profile diskette.
You can copy the Device Configuration Assistant software to a diskette from the Solaris Operating System for x86 Platforms DVD or Solaris Software for x86 Platforms - 2 CD by using the procedure in Solaris 10 3/05 for x86: Copying the Boot Software to a Diskette in Solaris 10 Installation Guide: Network-Based Installations.
# volcheck |
Copy the image of the Solaris 10 3/05 Device Configuration Assistant to the system's hard disk.
# dd if=/vol/dev/aliases/floppy0 of=boot_image |
In the command, boot_image is the name of the file into which you want to copy the image of the Solaris 10 3/05 Device Configuration Assistant. You can specify an absolute path name.
For example, the following command copies the boot diskette to a file that is named boot_save:
dd if=/vol/dev/aliases/floppy0 of=boot_save |
Eject the diskette by clicking Eject Disk in the File Manager window or by typing eject floppy on the command line.
In the Removable Media Manager dialog box, click OK.
Manually eject the Solaris 10 3/05 Device Configuration Assistant diskette.
Insert a blank diskette or a diskette that can be overwritten into the diskette drive.
# volcheck |
Format the diskette.
# fdformat -d -U |
Copy the Solaris 10 3/05 Device Configuration Assistant image from the system's hard disk to the formatted diskette.
# dd if=boot_image of=/vol/dev/aliases/floppy0 |
In the command, boot_image is the name of the file where you want to copy the image of the Solaris 10 3/05 Device Configuration Assistant. You can specify an absolute path name.
Determine if you want to copy examples of custom JumpStart files to your JumpStart directory.
If no, go to Step 7.
If yes, use the following decision table to determine what to do next.
Copy the example custom JumpStart files into the JumpStart directory on the profile diskette.
# cp -r media_path/Solaris_10/Misc/jumpstart_sample/* jumpstart_dir_path |
The path to the CD, DVD, or image on the local disk
The path to the profile diskette where you want to place the example custom JumpStart files
You must place all custom JumpStart installation files in the root (/) directory on the profile diskette.
For example, the following command copies the contents of jumpstart_sample on the Solaris Software for x86 Platforms - 1 CD to the root (/) directory on a profile diskette that is named scrap:
cp -r /cdrom/sol_10_x86/s2/Solaris_10/Misc/jumpstart_sample/* /floppy/scrap |
Update the example JumpStart files on the profile diskette so that the files work in your environment.
Ensure that root owns the JumpStart directory and that permissions are set to 755.
Eject the diskette by clicking Eject Disk in the File Manager window or by typing eject floppy on the command line.
In the Removable Media Manager dialog box, click OK.
Manually eject the diskette.
You have completed the creation of a profile diskette. Now you can update the rules file and create profiles on the profile diskette to perform custom JumpStart installations. To continue, go to Creating the rules File.