The installation server contains the installation image that is needed to install the Solaris software on systems from the network. You must create an installation server to install the Solaris software on a system from the network. You do not always need to set up a separate boot server. Refer to the following guidelines to determine whether you need to set up a separate boot server.
If you are using DHCP to set installation parameters, or if your installation server and client are on the same subnet, you do not need a separate boot server. For information about how to configure the DHCP client, see Chapter 16, Configuring and Administering the DHCP Client, in System Administration Guide: IP Services.
If your installation server and your client are not on the same subnet and you are not using DHCP, you must create separate boot servers for each subnet. You could create an installation server for each subnet. However, installation servers require more disk space.
This procedure assumes that the system is running Solaris Volume Manager. If you are not using Solaris Volume Manager to manage media, refer to System Administration Guide: Devices and File Systems for detailed information about managing removable media without Solaris Volume Manager.
On the system that is to become the installation server, become superuser or assume an equivalent role.
Roles contain authorizations and privileged commands. For more information about roles, see Configuring RBAC (Task Map) in System Administration Guide: Security Services.
The system must include a CD-ROM drive and be part of the site's network and name service. If you do not use a name service, you must distribute information about this system by following your site's policies.
Insert the Solaris installation CD into the system's drive.
Create a directory for the CD image.
# mkdir -p install-dir-path |
install-dir-path – Specifies the directory where the CD image is to be copied.
Change to the Tools directory on the mounted disc.
# cd /cdrom/cdrom0/Solaris_10/Tools |
where cdrom0 is the path to the drive that contains the Solaris OS CD media.
Copy the image in the drive to the installation server's hard disk.
# ./setup_install_server install-dir-path |
The setup_install_server command indicates whether you have enough disk space available for the Solaris Software disc images. To determine available disk space, use the df -kl command.
Decide if you need to make the installation server available for mounting.
If the installation server is on the same subnet as the system to be installed or you are using DHCP, you do not need to create a boot server. Proceed to Step 7.
If the installation server is not on the same subnet as the system to be installed and you are not using DHCP, complete the following steps:
Verify that the path to the installation server's image is shared appropriately.
# share | grep install-dir-path |
Make the installation server available by adding this entry to the /etc/dfs/dfstab file.
share -F nfs -o ro,anon=0 -d "install server directory" install-dir-path |
Verify that the nfsd daemon is running.
Share the installation server.
# shareall |
Change to the root (/) directory.
# cd / |
Eject the Solaris Software - 1 CD.
Insert the Solaris Software - 2 CD into the system's CD-ROM drive.
Change to the Tools directory on the mounted CD.
# cd /cdrom/cdrom0/Solaris_10/Tools |
Copy the CD in the CD-ROM drive to the installation server's disk.
# ./add_to_install_server install-dir-path |
Change to root (/) directory.
# cd / |
Eject the Solaris Software - 2 CD.
Repeat Step 9 through Step 13 for each Solaris Software CD installation.
Insert the Solaris Languages CD into the system's CD-ROM drive.
Change to the Tools directory on the mounted CD.
# cd /cdrom/cdrom0/Tools |
Copy the CD in the CD-ROM drive to the installation server's disk.
# ./add_to_install_server install-dir-path |
Change to the root (/) directory.
# cd / |
Determine if you need to create a boot server.
If the installation server is not on the same subnet as the system to be installed or you are not using DHCP, you need to create a boot server. For more information, see To Create a Boot Server on a Subnet With a CD Image in Solaris 10 Installation Guide: Network-Based Installations.
If you are using DHCP or the installation server is on the same subnet as the system to be installed, you do not need to create a boot server.
When you have finished setting up the installation server, you can begin to add client systems to be installed from the network. For information about how to add client systems, see How to Add Systems to Be Installed From the Network With add_install_client.
For additional information about the setup_install_server and the add_to_install_server commands, see the install_scripts(1M) man page.