In this configuration, the host's address applies to all the zones, including the labeled zones.
You are superuser in the global zone. You are in a Trusted CDE workspace.
Navigate to the Trusted_Extensions folder.
Double-click the Share Physical Interface action.
This action configures a host with one IP address. The global zone does not have a unique address. This system cannot be used as a multilevel print server or NFS server.
(Optional) In a terminal window, verify the results of the action.
# ifconfig -a |
The Share Physical Interface action configures all zones to have logical NICs. These logical NICs share a single physical NIC in the global zone.
For example, the following output shows the shared physical interface, hme0 on network interface 192.168.0.11 for all the zones.
lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232 index 1 inet 127.0.0.1 netmask ff000000 ether 0:0:00:00:00:0 hme0: flags=1000843<BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 2 all-zones inet 192.168.0.11 netmask fffffe00 broadcast 192.168.0.255 |
Starting in the Solaris 10 10/08 release, the loopback interface, lo0, is also an all-zones interface:
lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232 index 1 all-zones inet 127.0.0.1 netmask ff000000 ether 0:0:00:00:00:0 ... |