To Create a sysidcfg Configuration File

1. Create a file called sysidcfg in a text editor with the keywords you want.

2. Make the sysidcfg file available to clients by using one of the locations described at Table 2–2.

Example 2–1 SPARC: sysidcfg File

The following is an example of a sysidcfg file for a SPARC based system. The host name, IP address, and netmask of this system have been preconfigured by editing the naming service. Because all of the system configuration information is preconfigured in this file, you can use a custom JumpStart profile to perform a custom JumpStart installation. In this example, the NFSv4 domain name is automatically derived from the naming service. Because the service_profile keyword is not included in this example, configuration is not altered for the network services during installation.

keyboard=US-English
system_locale=en_US
timezone=US/Central
terminal=sun-cmd
timeserver=localhost
name_service=NIS {domain_name=marquee.central.example.com
                  name_server=nmsvr2(172.31.112.3)}
nfs4_domain=dynamic
root_password=m4QPOWNY
network_interface=hme0 {hostname=host1 
                       default_route=172.31.88.1 
                       ip_address=172.31.88.210 
                       netmask=255.255.0.0 
                       protocol_ipv6=no}
security_policy=kerberos {default_realm=example.com 
                          admin_server=krbadmin.example.com 
                          kdc=kdc1.example.com, 
                          kdc2.example.com}

Example 2–2 x86: sysidcfg File

The following sample sysidcfg file is for a group of x86 based systems. In this example, the NFSv4 domain name is specified to be example.com. This custom name overrides the default domain name. Also in this example, the network services are disabled or restricted to local connections only.

keyboard=US-English
timezone=US/Central
timeserver=timehost1
terminal=ibm-pc
service_profile=limited_net

name_service=NIS {domain_name=marquee.central.example.com
                  name_server=nmsvr2(172.25.112.3)}
nfs4_domain=example.com
root_password=URFUni9

Example 2–3 sysidcfg File for Configuring Multiple Interfaces

In the following sample sysidcfg file, configuration information is specified for both the eri0 and eri1 network interfaces. The eri0 interface is configured as the primary network interface, and eri1 is configured as a secondary network interface. In this example, the NFSv4 domain name is automatically derived from the naming service.

timezone=US/Pacific
system_locale=C
terminal=xterms
timeserver=localhost
network_interface=eri0 {primary
                        hostname=host1
                        ip_address=192.168.2.7
                        netmask=255.255.255.0
                        protocol_ipv6=no
                        default_route=192.168.2.1}

network_interface=eri1 {hostname=host1-b
                        ip_address=192.168.3.8
                        netmask=255.255.255.0
                        protocol_ipv6=no
                        default_route=NONE}
root_password=JE2C35JGZi4B2
security_policy=none
name_service=NIS {domain_name=domain.example.com
                  name_server=nis-server(192.168.2.200)}
nfs4_domain=dynamic

Continuing the Installation

If you plan to use the sysidcfg file in an installation over the network, you need to set up an installation server and add the system as an installation client. For more information, see Chapter 4, Installing From the Network (Overview).

If you plan to use the sysidcfg file in a WAN boot installation, you need to perform additional tasks. For more information, see Chapter 10, WAN Boot (Overview).

If you plan to use the sysidcfg file in a custom JumpStart installation, you need to create a profile and a rules.ok file. For more information, see Chapter 2, Custom JumpStart (Overview), in Solaris 10 10/08 Installation Guide: Custom JumpStart and Advanced Installations.

See Also

For more information about the sysidcfg file, see the man page sysidcfg(4).