將 UFS 檔案系統遷移至 ZFS 檔案系統

# zpool create rpool C0t0d0s4

# zfs list
NAME                        USED  AVAIL  REFER  MOUNTPOINT 
rpool                      9.29G  57.6G    20K  /rpool
# lucreate -c c0t0d0 -n new-zfsBE -p rpool
Analyzing system configuration.
Current boot environment is named <c0t0d0>.
Creating initial configuration for primary boot environment <c0t0d0>.
The device </dev/dsk/c0t0d0> is not a root device for any boot 
environment; cannot get BE ID.
PBE configuration successful: PBE name <c0t0d0> PBE Boot Device 
</dev/dsk/c0t0d0>.
Comparing source boot environment <c0t0d0> file systems with the file 
system(s) you specified for the new boot environment. Determining which 
file systems should be in the new boot environment.
Updating boot environment description database on all BEs.
Updating system configuration files.
The device </dev/dsk/c1t0d0s0> is not a root device for any boot 
environment; cannot get BE ID.
Creating configuration for boot environment <new-zfsBE>.
Source boot environment is <c0t0d0>.
Creating boot environment <new-zfsBE>.
Creating file systems on boot environment <new-zfsBE>.
Creating <zfs> file system for </> in zone <global> on 
<rpool/ROOT/new-zfsBE>.
Populating file systems on boot environment <new-zfsBE>.
Checking selection integrity.
Integrity check OK.
Populating contents of mount point </>.
Copying.
Creating shared file system mount points.
Creating compare databases for boot environment <zfsBE>.
Creating compare database for file system </>.
Making boot environment <zfsBE> bootable.
Creating boot_archive for /.alt.tmp.b-cBc.mnt
updating /.alt.tmp.b-cBc.mnt/platform/sun4u/boot_archive
Population of boot environment <new-zfsBE> successful.
Creation of boot environment <new-zfsBE> successful.

# lustatus
boot environment   Is         Active   Active     Can	    Copy 
Name               Complete   Now	  OnReboot   Delete	 Status 
------------------------------------------------------------------------ 
c0t0d0             yes       yes      yes        no         - 
new-zfsBE           yes       no       no        yes       -

# zfs list
NAME                        USED  AVAIL  REFER  MOUNTPOINT 
rpool                      9.29G  57.6G    20K  /rpool
rpool/ROOT                 5.38G  57.6G    18K  /rpool/ROOT
rpool/ROOT/zfsBE           5.38G  57.6G   551M  
rpool/ROOT/new-zfsBE       5.38G  57.6G   551M  /tmp/.alt.luupdall.110034
rpool/dump                 1.95G      -  1.95G  - 
rpool/swap                 1.95G      -  1.95G  - 

# luupgrade -n zfsBE -u -s /net/install/export/s10/combined.s10
 51135 blocks 
miniroot filesystem is <lofs>
Mounting miniroot at 
</net/install/export/solaris_10/combined.solaris_10_wos
/Solaris_10/Tools/Boot> 
Validating the contents of the media 
</net/install/export/s10/combined.s10>. 
The media is a standard Solaris media. 
The media contains an operating system upgrade image. 
The media contains Solaris version <10_1008>. 
Constructing upgrade profile to use. 
Locating the operating system upgrade program. 
Checking for existence of previously scheduled Live 
Upgrade requests. 
Creating upgrade profile for BE <zfsBE>. 
Determining packages to install or upgrade for BE <zfsBE>. 
Performing the operating system upgrade of the BE <zfsBE>. 
CAUTION: Interrupting this process may leave the boot environment 
unstable or unbootable. 
Upgrading Solaris: 100% completed 
Installation of the packages from this media is complete. 
Adding operating system patches to the BE <zfsBE>. 
The operating system patch installation is complete. 
INFORMATION: The file /var/sadm/system/logs/upgrade_log on boot 
environment <zfsBE> contains a log of the upgrade operation. 
INFORMATION: The file var/sadm/system/data/upgrade_cleanup on boot 
environment <zfsBE> contains a log of cleanup operations required. 
INFORMATION: Review the files listed above. Remember that all 
of the files are located on boot environment <zfsBE>. 
Before you activate boot environment <zfsBE>, determine if any 
additional system maintenance is required or if additional media 
of the software distribution must be installed. 
The Solaris upgrade of the boot environment <zfsBE> is complete.

# luactivate new-zfsBE
**********************************************************************

The target boot environment has been activated. It will be used when you 
reboot. NOTE: You MUST NOT USE the reboot, halt, or uadmin commands. You 
MUST USE either the init or the shutdown command when you reboot. If you 
do not use either init or shutdown, the system will not boot using the 
target BE.

**********************************************************************
In case of a failure while booting to the target BE, the following process 
needs to be followed to fallback to the currently working boot environment:

1. Enter the PROM monitor (ok prompt).

2. Change the boot device back to the original boot environment by typing:

     setenv boot-device /pci@1f,0/pci@1/scsi@4,1/disk@2,0:a

3. Boot to the original boot environment by typing:

     boot

**********************************************************************

Modifying boot archive service
Activation of boot environment <new-zfsBE> successful.

# init 6
# svc.startd: The system is coming down.  Please wait.
svc.startd: 79 system services are now being stopped.
.
.
.

# luactivate c0t0d0
WARNING: The following files have changed on both the current boot 
environment <new-zfsBE> zone <global> and the boot environment 
to be activated <c0t0d0>:
 /etc/zfs/zpool.cache
INFORMATION: The files listed above are in conflict between the current 
boot environment <zfsBE> zone <global> and the boot environment to be 
activated <c0t0d0>. These files will not be automatically synchronized 
from the current boot environment <new-zfsBE> when boot environment <c0t0d0>