Attempting to connect a board that is on the disabled board list might produce an error message:
# cfgadm -c connect sysctrl0:slotnumber cfgadm: Hardware specific failure: connect failed: board is disabled: must override with [-f][-o enable-at-boot] |
To override the disabled condition, two options are available:
Using the force flag (-f)
# cfgadm -f -c connect sysctrl0:slot number |
Using the enable option (-o enable-at-boot)
# cfgadm -o enable-at-boot -c connect sysctrl0:slot number |
To remove all boards from the disabled board list, choose one of two options depending on the prompt from which you issue the command:
From the superuser prompt, type:
# eeprom disabled-board-list= |
From the OpenBoot PROM prompt, type:
OK set-default disabled-board-list |
For further information about the disabled-board-list setting, refer to the “Specific NVRAM Variables” section in the Platform Notes: Sun Enterprise 3x00, 4x00, 5x00, and 6x00 Systems manual. This manual is part of the documentation set in this release.