x86: Manual Configuration Required to Specify Non-US English Keyboards

By default, the kdmconfig program specifies Generic US-English(104-Key) as the keyboard type that is connected to the system. If the system's keyboard is not a US-English keyboard, you must manually specify the keyboard type during installation. Otherwise, installation continues by using the default keyboard specification that is inconsistent with the system's actual keyboard type.

Workaround 1: If the system's keyboard is not a US-English keyboard, perform the following steps during installation:

1. When the Proposed Window System Configuration For Installation is displayed, press Esc.

   ---

   Note –

   The information on the Proposed Window System Configuration For Installation, which includes the keyboard type, is displayed only for 30 seconds. If you want to change configuration settings, you must press Esc before the 30 seconds lapse. Otherwise, the installation continues by using the displayed settings.

   ---

2. Change the keyboard type to the type that corresponds to your system's keyboard.

3. Press Enter to accept the changes and continue with the installation.

Workaround 2: If you want to change the keyboard type in a system that is already running Solaris 10 OS, use the kdmconfig program. Choose the option that applies to the type of X server your system is running.

• If your system is running the Xsun server, follow these steps:

  1. Run kdmconfig.

  2. Use the Change Keyboard option to change the keyboard type.

  3. Save the configuration.

• If your system is running the default Xorg server, follow these steps:

  1. Run kdmconfig.

  2. Select the Xsun server.

  3. Use the Change Keyboard option to change the keyboard type.

  4. Save the configuration.

  5. Run kdmconfig again to switch to the Xorg server.