Trusted Stripe Disappears From the Screen After Resolution Change (6460624)
CDE Removable Media Auto Run Capability Removed (4634260)
Solaris PDASync Cannot Delete Last Entry From the Desktop (4260435)
x86: raidctl Fails to Create VDs on Dell SAS6i/R (6669169)
x86: ata Timeouts During Boot (6586621)
zoneadm install Fails With a ZFS Legacy Mount (6449301)
ZFS and UNIX/POSIX Compliance Issues
fdisk -E Can Sweep Disk Used by ZFS Without Warning (6412771)
ZFS and Third-Party Backup Product Issues
Veritas NetBackup Does Not Back Up and Preserve Files With ZFS/NFSv4 ACLs (6352899)
BrightStor ARCserve Backup Client Agent for UNIX (Solaris) and ZFS Support
ZFS GUI Should Check For /usr/lib/embedded_su at the Beginning of Each Wizard (6326334)
Fails to Sync File System on Panic (6250422)
Upgrading From Some Solaris Express or Solaris 10 Releases Requires Remounting of File Systems
NFSv4 Access Control List Functions Might Work Incorrectly
Access Problems Between Solaris NFSv4 Clients and NFSv4 Servers
Using mkfs Command to Create File System Might Fail on Very Large Disks (6352813)
System Crash Dump Fails on Devices Greater Than 1 TByte (6214480)
Using smosservice Command to Add OS Services Results in Insufficient Disk Space Message (5073840)
Hardware-Related Issues and Bugs
SPARC: SCSI Second Disk Fails to Attach After Solaris Live Upgrade (6684776)
x86: Cannot Enable MPxIO (6664694)
64-bit SPARC: DR Operations Involving Lowest CPU ID Fail (6663570)
SPARC: 19.55% Performance Regression for the NCP Device Driver (6660074)
64-bit SPARC: Some DR Commands Fail (6614737)
The (ZFS) ARC Allocates Memory Inside The Kernel Cage Preventing DR (6522017)
mpathadm Does Not Display Load-Balance Setting Specific to Device
Registration Tool Prevents Power Management on Some Framebuffers (6321362)
SPARC: Sun Crypto Accelerator 4000 Board Versions 1.0 and 1.1 Not Supported in Solaris 10 OS
Certain USB 2.0 Controllers Are Disabled
Supported USB Devices and Corresponding Hub Configurations
x86: Limitations Exist With Certain Device Drivers in Solaris 10 OS
DVD-ROM/CD-ROM Drives on Headless Systems
x86: Manual Configuration Required to Specify Non-US English Keyboards
Contention Exists Between Certain Devices That Share the Same Bus (6196994)
hat_getkpfnum() DDI Function Is Obsolete (5046984)
Some DVD and CD-ROM Drives Fail to Boot Solaris (4397457)
iPlanet Directory Server 5.1 Issues
Installing Directory Server 5.1
Migrating to the Sun Java System Directory Server 5 2005Q1
x86: Unexpected SIGTRAP Signal Causes dbx Debugger to Hang (6546562 )
SPARC: Problems With dbx Debugger While Processing 64-bit Objects (6347707)
System Might Loop When Master CPU Is Changed (4405263)
Multiple Input Method Switcher Applications Appear in Trusted Java DS
Input Method Cannot Be Enabled With Primary Administrator Rights (6475081)
New ChuYin Input Method Not Supported in Upgrade to IIIMF rev.12 (6492129)
AltGr Does Not Work As Mode Switcher in Some Russian Locales (6487712)
Arabic Text Not Appearing in ar Locales
Several Arabic Fonts Do Not Work in GNOME (6384024)
Unable to Switch Input Language on Session-Saved Applications (6360759)
Keyboard Shortcuts in Mozilla in ES Locale Are Unusual and Ambiguous (6288620)
Migration Note to UTF-8 locales
Emails Saved As Portable Format
File Names and Directory Names
Launching Legacy Locale Applications
Hardware for Some Keyboards Layouts Type 6 and 7 Not Available
Sort Capability in the European UTF-8 Locales Does Not Function Correctly (4307314)
nxge Driver Panics in nxge_fflp_stat_update (6644276)
SPARC: NFS/RDMA Connection Errors (6229077)
Login Fails on iSCSI Target With Two Portals and One Bad Portal (6476060)
System Domain of Interpretation Is Not Configurable (6314248)
IP Forwarding Disabled by Default in Solaris 10 OS
Zone Not Booting When IP Address Belongs to a Failed IP Network Multipathing Group (6184000)
Intermittent Errors Might Occur With the Use of DataDigests (5108515)
KDC Daemons Fail to Start (6623803)
Nonpassword Logins Fail With pam_ldap Enabled (6365896)
Incorrect Parameters Might Cause Panic in Sun StorEdge T3 (4319812)
Login Prompts Sometimes Appear Before File Systems Are Mounted (5082164)
System Does Not Respond to Smart Card (4415094)
Solaris Commands and Standards
Changed Man Pages for Solaris Trusted Extensions Are in Reference Manual Only
Bash 2.0.5b No Longer Sets Some Environment Variables
New ln Utility Requires -f Option
New tcsh Rejects setenv Variable Names That Use a Dash or an Equals Sign
STDIO getc Family EOF Condition Behavior Change
Output Columns of the ps Command Have Been Widened
Command ping -v Does Not Work on IPv6 Addresses (4984993)
Solaris Volume Manager metattach Command Might Fail
Solaris Volume Manager metassist Command Fails in Non-English Locales (5067097)
Volume Creation Fails in Systems With Unformatted Disks (5064066)
Solaris Volume Manager metadevadm Command Fails if Logical Device Name No Longer Exists (4645721)
Solaris Volume Manager metarecover Command Fails to Update metadb Namespace (4645776)
Problems With Using Multiple Attachments (6260583)
Problem With Changing Authentication Type (6246543)
Incomplete List of Contacts in Contact Folder (5088514)
Wrong Help Window Opened For Volume Control (6253210)
Cannot Print Certain Documents From the Mozilla Browser
User Preferences Not Fully Compatible
Problems With Online Registration of StarOffice 7 Software (6208829)
Nautilus ACL MASK is Not in Sync With Group Permissions (6464485)
strftime(3c) Should Support GNU Extension in %-m And %-d (6448815)
x86: Cannot Configure Full-Screen Magnification on Systems With One Video Card
x86: Problems Configuring USB Mouse Device as Extension Device for Use With GNOME On-Screen Keyboard
Certain View Options Might Cause File Manager to Fail (6233643)
Problems Creating Certain Types of Archives (5082008)
SPARC: Solaris Volume Manager GUI Fails to Start (6671736)
Cannot Log In to Solaris Management Console After Enabling Solaris Trusted Extensions (6639493)
zoneadm attach Command Might Fail (6550154)
Deferred Activation Patching (6486471)
Possible Error With 32-bit Applications Getting File System State on Large File Systems (6468905)
Sun Patch Manager Tool 2.0 Not Compatible With Previous Versions
Cannot Delete Existing Diskless Clients From the System (6205746)
SPARC: smosservice delete Command Does Not Successfully Remove All Directories (6192105)
kill -HUP Does Not Always Cause the Agent to Reread the snmpd.conf Configuration File (4988483)
x86: Pressing the F4 Key During BIOS Bootup Fails to Boot the Service Partition (4782757, 5051157)
4. End-of-Software Support Statements
6. What's New in Solaris 10 5/08
A. Table of Integrated Bug Fixes in the Solaris 10 Operating System
The following Solaris Volume Manager bugs apply to the Solaris 10 release.
If you have a Solaris Volume Manager mirrored root (/) file system in which the file system does not start on cylinder 0, all submirrors you attach must also not start on cylinder 0.
If you attempt to attach a submirror starting on cylinder 0 to a mirror in which the original submirror does not start on cylinder 0, the following error message is displayed:
can't attach labeled submirror to an unlabeled mirror
Workaround: Choose one of the following workarounds:
Ensure that both the root file system and the volume for the other submirror start on cylinder 0.
Ensure that both the root file system and the volume for the other submirror do not start on cylinder 0.
Note - By default, the JumpStart installation process starts swap at cylinder 0 and the root (/) file system somewhere else on the disk. Common system administration practice is to start slice 0 at cylinder 0. Mirroring a default JumpStart installation with root on slice 0, but not cylinder 0, to a typical secondary disk with slice 0 that starts at cylinder 0, can cause problems. This mirroring results in an error message when you attempt to attach the second submirror. For more information about the default behavior of Solaris installation programs, see the Solaris 10 Installation Guides.
In non-English locales, the Solaris Volume Manager metassist command might fail to create volumes. For example, if LANG is set to ja (Japanese), the following error message is displayed:
xmlEncodeEntitiesReentrant : input not UTF-8 Syntax of value for attribute read on mirror is not valid Value "XXXXXX"(unknown word) for attribute read on mirror is not among the enumerated set Syntax of value for attribute write on mirror is not valid Value "XXXXXX"(Parallel in Japanse) for attribute write on mirror is not among the enumerated set metassist: XXXXXX(invalid in Japanese) volume-config
Workaround: As superuser, set the LANG variable to LANG=C.
For the Bourne, Korn, and Bash shells, use the following command:
# LANG=C; export LANG
For the C shell, use the following command:
# setenv LANG C
Creating Solaris Volume Manager volume configurations with the metassist command might fail if an unformatted disk is in the system. The following error message is displayed:
metassist: failed to repartition disk
Workaround: Manually format any unformatted disks before you issue the metassist command.
If you create a Solaris Volume Manager RAID-1 (mirror) or RAID-5 volume in a disk set that is built on top of a soft partition, hot spare devices do not work correctly.
Problems that you might encounter include, but are not limited to, the following:
A hot spare device might not activate.
A hot spare device status might change, indicating the device is broken.
A hot spare device is used, but resynced from the wrong drive.
A hot spare device in use encounters a failure, but the broken status is not reported.
Workaround: Do not use this configuration to create a Solaris Volume Manager RAID-1 or RAID-5 volume in disk sets.
You cannot replace a failed drive with a drive that has been configured with the Solaris Volume Manager software. The replacement drive must be new to Solaris Volume Manager software. If you physically move a disk from one slot to another slot on a Sun StorEdge A5x00, the metadevadm command fails. This failure occurs when the logical device name for the slice no longer exists. However, the device ID for the disk remains present in the metadevice replica. The following message is displayed:
Unnamed device detected. Please run 'devfsadm && metadevadm -r to resolve.
Note - You can access the disk at the new location during this time. However, you might need to use the old logical device name to access the slice.
Workaround: Physically move the drive back to its original slot.
If you remove and replace a physical disk from the system, and then use the metarecover -p -d command to write the appropriate soft partition specific information to the disk, an open failure results. The command does not update the metadevice database namespace to reflect the change in disk device identification. The condition causes an open failure for each such soft partition that is built on top of the disk. The following message is displayed:
Open Error
Workaround: Create a soft partition on the new disk instead of using the metarecover command to recover the soft partition.
Note - If the soft partition is part of a mirror or RAID 5, use the metareplace command without the -e option to replace the old soft partition with the new soft partition.
# metareplace dx mirror or RAID 5 old_soft_partition new_soft_partition