The following example shows how to add a transport cable, transport adapter, or transport junction to a node using the scsetup command.
[Ensure the physical cable is installed.] # scsetup Select Cluster interconnect. Select either Add a transport cable, Add a transport adapter to a node, or Add a transport junction. Answer the questions when prompted. You Will Need: Example: node names phys-schost-1 adapter names qfe2 junction names hub2 transport type dlpi [Verify that the scconf command completed successfully:] Command completed successfully. Quit the scsetup Cluster Interconnect Menu and Main Menu. [Verify that the cable, adapter, and junction are added:] # scconf -p | grep cable Transport cable: phys-schost-2:qfe0@1 ethernet-1@2 Enabled Transport cable: phys-schost-3:qfe0@1 ethernet-1@3 Enabled Transport cable: phys-schost-1:qfe0@0 ethernet-1@1 Enabled # scconf -p | grep adapter Node transport adapters: qfe2 hme1 qfe0 Node transport adapter: qfe0 Node transport adapters: qfe0 qfe2 hme1 Node transport adapter: qfe0 Node transport adapters: qfe0 qfe2 hme1 Node transport adapter: qfe0 # scconf -p | grep junction Cluster transport junctions: hub0 hub1 hub2 Cluster transport junction: hub0 Cluster transport junction: hub1 Cluster transport junction: hub2 |