This example shows how to enable a cluster transport cable on adapter qfe-1 located on the node phys-schost-2.
[Become superuser on any node.] [Enter the scsetup utility:] # scsetup Select Cluster interconnect>Enable a transport cable. Answer the questions when prompted. You will need the following information. You Will Need: Example: node names phys-schost-2 adapter names qfe1 junction names hub1 [Verify that the scconf command completed successfully:] scconf -c -m endpoint=phys-schost-2:qfe1,state=enabled Command completed successfully. Quit the scsetup Cluster Interconnect Menu and Main Menu. [Verify that the cable is enabled:] # scconf -p | grep cable Transport cable: phys-schost-2:qfe1@0 ethernet-1@2 Enabled Transport cable: phys-schost-3:qfe0@1 ethernet-1@3 Enabled Transport cable: phys-schost-1:qfe0@0 ethernet-1@1 Enabled |