Connect the cables to the storage arrays, as shown in Figure 3–6.
Ensure that the entire bus length that is connected to each storage array is less than 25 m. This measurement includes the cables to both nodes, as well as the bus length that is internal to each storage array, node, and the host adapter.
Ensure that the entire SCSI bus length to each enclosure is less than 25 m. This measurement includes the cables to both nodes, as well as the bus length that is internal to each enclosure, node, and host adapter. Refer to the documentation that shipped with the enclosure for other restrictions about SCSI operation.
Connect the storage array to the host adapters by using differential SCSI cables as shown in see Figure 3–8.
Disconnect the SCSI cables from the storage array. Remove the SCSI cables in the order that is shown in Figure 3–9.
Disconnect the SCSI cables from the storage array. Remove the SCSI cables in the order that is shown in Figure 3–10.