El inicio de un nodo del clúster puede quedar afectado por la configuración del quórum. En un clúster de dos nodos, debe disponer de un dispositivo del quórum configurado de tal modo que la cuenta total del quórum para el clúster sea tres. Deberá tener un quórum de uno por cada nodo y uno adicional por el dispositivo de quórum. En esta situación, si se para el primer nodo, el segundo sigue teniendo quórum y funciona como miembro único del clúster. Para que el primer nodo vuelva al clúster como nodo de éste, el segundo nodo debe estar en marcha y activo. El total del quórum requerido del clúster (dos) debe estar presente.
Para iniciar un nodo del clúster que ha sido parado, arranque el nodo.
SPARC:
ok boot |
x86:
<<< Parámetros de arranque actuales >>> Ruta de arranque: /pci@0,0/pci8086,2545@3/pci8086,1460@1d/pci8086,341a@7,1/ sd@0,0:a Argumentos de arranque: Escriba b [nombre-archivo] [indicadores-arranque] <INTRO> arrancar con opciones o i <INTRO> introducir el intérprete de arranque o <INTRO> arrancar con los valores predeterminados <<< tiempo de espera sobrepasado en 5 segundos >>> Seleccione (b)arranque o (i)ntérprete: b -x |
El nodo debe disponer de una conexión funcional con la interconexión del clúster para pertenecer a éste.
Compruebe que el nodo haya arrancado sin errores y se encuentre en línea.
La orden scstat informa del estado de un nodo.
# scstat -n |
Si esto llegara a suceder, es posible que Sun Cluster no pueda reiniciarse en ese nodo. Si surge este problema, consulteCómo reparar un sistema de archivos /var completo.
En el ejemplo siguiente se muestra la salida de la consola correspondiente a arrancar el nodo phys-schost-1 en el clúster.
ok boot Rebooting with command: boot ... Hostname: phys-schost-1 Booting as part of a cluster ... NOTICE: Node phys-schost-1: attempting to join cluster ... NOTICE: Node phys-schost-1: joined cluster ... The system is coming up. Please wait. checking ufs filesystems ... reservation program successfully exiting Print services started. volume management starting. The system is ready. phys-schost-1 console login: |
En el ejemplo siguiente se muestra la salida de la consola correspondiente a arrancar el nodo phys-schost-1 en el clúster.
<<< Parámetros de arranque actuales>>> Ruta de arranque: /pci@0,0/pci8086,2545@3/pci8086,1460@1d/pci8086,341a@7,1/sd@0,0:a Argumentos de arranque: Escriba b [nombre_archivo] [indicadores_arranque] <INTRO> arrancar con opciones o i <INTRO> introducir el intérprete de arranque o <INTRO> arrancar con los valores predeterminados <<< tiempo de espera sobrepasado en 5 segundos >>> Seleccione (b)arranque o (i)ntérprete: Size: 276915 + 22156 + 150372 Bytes /platform/i86pc/kernel/unix loaded - 0xac000 bytes used SunOS Release 5.9 Version on81-feature-patch:08/30/2003 32-bit Copyright 1983-2003 Sun Microsystems, Inc. All rights reserved. Use is subject to license terms. configuring IPv4 interfaces: e1000g2. Hostname: phys-schost-1 Booting as part of a cluster NOTICE: CMM: Node phys-schost-1 (nodeid = 1) with votecount = 1 added. NOTICE: CMM: Node phys-schost-2 (nodeid = 2) with votecount = 1 added. NOTICE: CMM: Quorum device 1 (/dev/did/rdsk/d1s2) added; votecount = 1, bitmask of nodes with configured paths = 0x3. WARNING: CMM: Initialization for quorum device /dev/did/rdsk/d1s2 failed with error EACCES. Will retry later. NOTICE: clcomm: Adapter e1000g3 constructed NOTICE: clcomm: Path phys-schost-1:e1000g3 - phys-schost-2:e1000g3 being constructed NOTICE: clcomm: Path phys-schost-1:e1000g3 - phys-schost-2:e1000g3 being initiated NOTICE: clcomm: Path phys-schost-1:e1000g3 - phys-schost-2:e1000g3 online NOTICE: clcomm: Adapter e1000g0 constructed NOTICE: clcomm: Path phys-schost-1:e1000g0 - phys-schost-2:e1000g0 being constructed NOTICE: CMM: Node phys-schost-1: attempting to join cluster. WARNING: CMM: Reading reservation keys from quorum device /dev/did/rdsk/d1s2 failed with error 2. NOTICE: CMM: Cluster has reached quorum. NOTICE: CMM: Node phys-schost-1 (nodeid = 1) is up; new incarnation number = 1068503958. NOTICE: CMM: Node phys-schost-2 (nodeid = 2) is up; new incarnation number = 1068496374. NOTICE: CMM: Cluster members: phys-schost-1 phys-schost-2. NOTICE: CMM: node reconfiguration #3 completed. NOTICE: CMM: Node phys-schost-1: joined cluster. NOTICE: clcomm: Path phys-schost-1:e1000g0 - phys-schost-2:e1000g0 being initiated NOTICE: clcomm: Path phys-schost-1:e1000g0 - phys-schost-2:e1000g0 online NOTICE: CMM: Retry of initialization for quorum device /dev/did/rdsk/d1s2 was successful. WARNING: mod_installdrv: no major number for rsmrdt ip: joining multicasts failed (18) on clprivnet0 - will use link layer broadcasts for multicast The system is coming up. Please wait. checking ufs filesystems /dev/rdsk/c1t0d0s5: is clean. NIS domain name is dev.eng.mycompany.com starting rpc services: rpcbind keyserv ypbind done. Setting netmask of e1000g2 to 255.255.255.0 Setting netmask of e1000g3 to 255.255.255.128 Setting netmask of e1000g0 to 255.255.255.128 Setting netmask of clprivnet0 to 255.255.255.0 Setting default IPv4 interface for multicast: add net 224.0/4: gateway phys-schost-1 syslog service starting. obtaining access to all attached disks ***************************************************************************** * * The X-server can not be started on display :0... * ***************************************************************************** volume management starting. Starting Fault Injection Server... The system is ready. phys-schost-1 console login: |