Sun Java System Communications Express 6 2005Q4 Administration Guide

Application-Wide Parameters in uwcconfig.properties and uwcauth.properties File

Table D–1 Parameters in uwcconfig.properties

Parameters 

Default Value 

Description 

uwc.gzipcompression 

true 

Enables GZIP compression on the Communications Express HTTP response. 

Set this value to true to enable GZIP compression of the HTTP response. This improves the throughput of the Communications Express page access. 

uwc.renderhtml 

Specifies whether calendar is required to render data in HTML format. 

Set this value to ”y’ to render the calendar data in HTML format. 

manual_purge_enabled 

true 

Enables a user with jsessionid to invoke the Addressbook Server command, purge_entries.wabp, and permanently delete all entries marked for deletion.

auto_purge_enabled 

false 

Automatically purges contacts that are marked for deletion when login.wabp is invoked.

Set this value to true to enable automatic purge of contacts when login.wabp is invoked.

expire_period 

Specifies the purge period in days, after which entries marked for deletion are permanently deleted. 

This parameter is valid only when auto_purge_enabled is set to true.

purge_interval 

30 

Specifies the purge interval in days. 

The purge cycle is triggered at the interval specified here only when auto_purge_enabled is set to true.

addressbook.wabp.version 

1.0 

Specifies the address book protocol version. 

Table D–2 Parameters in uwcauth.properties

Parameters 

Default Value 

Description 

defaultdomain 

 

Specifies the default domain to be used when the domain does not have the required properties, the properties are picked up from the default domain name. 

The attribute defaultdomain is assigned the value entered during configuration. 

defaultlocale 

en 

Specifies the default locale to be used by the application. 

virtualdomain.mode 

 

Specifies whether Communications Express is operating in virtual domain mode. 

Enable this option if you have enabled hosted domain support for Calendar Server. 

The virtualdomain.mode is assigned the value entered during configuration.

db_config.properties file

Table D-3, list the parameters of db_config.properties file.

Table D–3 Corporate Directory Parameters

Parameters 

Default Value 

Description 

defaultserver.ldappoolmin 

 

Specifies the minimum number of LDAP client connections. 

defaultserver.ldappoolmax 

 

Specifies the maximum number of LDAP client connections. 

defaultserver.ldappooltimeout 

 

Specifies the number of seconds before timing out an LDAP connection. Increase this value to accommodate large search results. 

defaultserver.ldaphost 

 

Specifies the LDAP host. 

defaultserver.ldapport 

 

Specifies the LDAP port. 

defaultserver.ldapbinddn 

cn=Directory Manager 

Specifies the DN used to bind to the LDAP. 

If the login type is “restricted” or “proxy” it is mandatory to assign a value to defaultserver.ldapbinddn.

If the login type is “anonymous” you need not enter a value for this parameter. 

defaultserver.ldapbindcred 

 

Specifies the bind password. 

login_type 

 

Specifies the method using which the connection to the LDAP store is maintained. 

You can assign the following three values to this parameter: 

anon - to connect to the LDAP as an anonymous user

restricted - to connect as a user who has the rights to perform operations on the Address Book Store.

proxy - to masquerade as a user who can perform operations on the Address Book Store. Assigning this value enhances performance by passing the LDAP bind on each operation.

NOTE: A Read only access is given to a masquerading user. 

entry_id 

 

Specifies the key in LDAP used to identify a contact/group entry. 

You can set the entry_id to the UID or to the key used to fetch the contact/group information such as empid or principal ID.

In the xlate-inetorgperson.xml file replace “uid” in <entry entryID= “db:uid”\> with the entry_id value specified here.

retrieve_db_attribs 

 

Defines whether all the database attributes should be passed in the LDAP search. 

lookthru_limit 

1000 

Specifies the search query limit for a search. 

delete_perm 

 

Enables contact/group entries to be marked for deletion or to be deleted permanently. 

Set the parameter to false to mark the contacts/groups for deletion. 

Set the parameter to true to permanently delete the contacts and groups. 

admin_group_dn 

 

Specifies the Dn of the admin group. 

A user belonging to this group can purge all contacts that are marked for deletion. 

entry_id 

uid 

Specifies the key in the LDAP used to identify a contact/group entry. 

You can set the entry_id to the UID or to the key used to fetch the contact/group information such as empid or principal ID.

In the xlate-inetorgperson.xml file, replace “uid” in <entry entryID=“db:uid”\> with the entry_id value specified here.

login_type 

restricted 

Specifies the method using which the connection to the LDAP store is maintained. 

You can assign the following three values to this parameter: 

anon - to connect to the LDAP as an anonymous user

restricted - to connect as a user who has the rights to perform operations on the Address Book Store.

proxy - to masquerade as a user who can perform operations on the Address Book Store. Assigning this value enhances performance as it by passes the LDAP bind on each operation.

NOTE: A Read only access is given to a masquerading user. 

uwcconfig.properties

Table D-4, list the parameters of uwcconfig.properties file.

Table D–4 Parameters of uwcconfig.properties

Parameters 

Default Value  

Description 

mail.deployed 

 

Specifies whether Messenger Express is deployed. The parameter is set when you run the configuration wizard. 

The attribute is set to “true” if Messenger Express is deployed. 

webmail.host 

 

Specifies the host name of the machine on which Messenger Express is deployed. 

The host name of Messenger Express should correspond to the machine name on which Web Server is deployed. 

webmail.port 

80 

Specifies the port number Messenger Express HTTP Server listens to. 

calendar.deployed 

 

Specifies whether the calendar module is deployed. The parameter is set when you run the configuration wizard. 

The attribute is set to “true” if Calendar is deployed. 

calendar.wcap.host 

 

Specifies the host name of the WCAP server. 

calendar.wcap.port 

 

Specifies the port number WCAP listens to. 

calendar.wcap.adminid 

calmaster 

Specifies the Admin ID for the WCAP Sever. 

calendar.wcap.passwd 

 

Specifies the Admin Password for the WCAP Server. 

calendar.jcapi.serviceclass 

.socs 

com.sun.comclient.calendar. 

socs.SOCSCalendarStore 

Specifies the name of Class implementing Java API for Calendar JCAPI, for Sun Java Systems Calendar Server. 

Note: Do not change this value. 

uwc.gzipcompression 

 

Enables GZIP compression on the Communications Express HTTP response. 

Set this value to true to enable GZIP compression of the HTTP response. This improves the throughput of the Communications Express page access. 

uwc.renderhtml 

 

Specifies whether calendar data needs to be rendered in HTML. 

The parameter is set to ”y\q if calendar data is to be rendered in HTML. 

Valid values are \qy\q or \qn\q. 

log.file 

This parameter is used by Address book module. 

/tmp/trace.log 

Species the location of the log file. 

By default messages go to the web container error log file. 

log.level 

This parameter is used by Address book module. 

Specifies the log level for the application. To disable logging for this module, set the value to 0. 

The valid values are: 

!evel = 0 (off), 1 (debug only), 2 (error only), 3 (all). 

log.components 

This parameter is used by Address book module. 

127 

Specifies the component level for logging. 

maxpostcontentlength 

1000000 

Specifies the maximum content-length of a POST command with a content-type of multipart/form-data (for file upload) in octets. 

-1 refers to no limit. 

uwcloginpath 

/base/UWCMain 

Specifies the path to the Communications Express login page. 

sessionobjfactory.pstore.class 

com.iplanet.iabs.coresrv. 

CorePersonalStoreFactory 

Defines the class implementing the SessionObjectFactory 

sessionobjfactory.pstore. 

configpath 

 

Specifies the plug-in configuration path. The path is either relative to the path of the current file or absolute to the path of the current file. 

sessionobjfactory.pstore. 

sessionid 

com.iplanet.iabs.pstore 

Specifies the name under which the object should be stored in the user\qs session. 

addressbook.wabp.version 

 

Specifies the address book protocol version. 

manual_purge_enabled 

 

Enables a user with jsessionid to invoke the Addressbook Server command, purge_entries.wabp and permanently delete all entries marked for deletion.

auto_purge_enabled 

 

Automatically purges contacts that are marked for deletion when login.wabp is invoked.

Set this value to true to enable automatic purge of contacts when login.wabp is invoked.

expire_period 

 

Specifies the purge period in days, after which entries marked for deletion are permanently deleted. 

This parameter is valid only when auto_purge_enabled is set to true.

purge_interval 

 

Specifies the purge interval in days. 

The purge cycle is triggered at the interval specified here only when auto_purge_enabled is set to true.

uwc.homepageurl 

 

Specifies the Home Page Url. 

When the users click the home link, they are taken to this URL. 

In the absence of this parameter, home link will take the user to the user\qs default application. 

uwcauth.properties file

Table D-5, list the parameters of the uwcauth.properties file.

Table D–5 Parameters of uwcauth.properties

Parameters 

Default Value 

Description 

defaultdomain 

 

Specifies the default domain to be used when the domain does not have the required properties. The properties are picked up from the default domain name. 

The default domain is assigned the value entered during configuration. 

defaultlocale 

 

Defines the default locale of the application. 

virtualdomain.mode 

 

Defines the mode in which calendar server is operating. If the calendar server is operating in hosted (also known as virtual) domain mode, set the parameter value to \qy\q otherwise to \qn\q. 

uwcauth.ssl.enabled 

 

Defines if SSL is enabled. 

uwcauth.ssl.authonly 

 

Defines if SSL is enabled for authentication only. 

ldapauth.ldaphost 

 

Specifies the LDAP host value. 

Normally the ldapauth.ldaphost value is the same as the ldapusersession value. You can set it to a different value, if required.

ldapauth.ldapport 

 

Specifies the ldap port number. 

ldapauth.dcroot 

 

Specifies the DC root for the authentication tree. 

ldapauth.domainattr 

inetDomainBaseDNinetDomainStatusinetDomainSearchFilterdomainUidSeparatorpreferredLanguage 

Specifies the list of attributes to be retrieved from the domain entry in which the user is authenticated. 

ldapauth.domainfilter 

(|(objectclass=inetDomain)(objectclass=inetDomainAlias)) 

Specifies the filter based on which the domain entry is retrieved. 

ldapauth.ldapbinddn 

<binddn\> 

Specifies User DN of the user binding to the authentication LDAP. 

ldapauth.ldapbindcred 

<binddncredintials\> 

Specifies password of the user binding to the authentication LDAP. 

ldapauth.enablessl 

false 

Specifies whether the directory against which authentication is to be performed is in SSL mode. 

Change the default value to “true” to setup a secure LDAP connection. 

ldapusersession.defaultugfilter 

 

Specifies the default filter syntax to be used when retrieving the user entry. 

Parameters for the user lookup 

   

ldapusersession.ugattr 

uid,inetUserStatus,preferredLanguage,psRoot,pabURI,cn,mail,mailHost 

Specifies the set of attributes to be returned from LDAP during entry lookup. 

ldapusersession.ldaphost 

 

Specifies the Host name of the directory server used for users lookup. More than one host can be specified for fallback. 

The names of the servers are delimited by semi-colon (;). 

!The name of fallback servers should be in the format: Host Name: Port# 

ldapusersession.ldapport 

 

Specifies the port number of the user/group directory server. 

ldapusersession.ldapbinddn 

 

Specifies the UserDN of the admin binding to the user group Directory Server. 

ldapusersession.ldapbindcred 

 

Specifies the password of the admin binding to the user tree. 

ldapusersession.dcroot 

 

Specifies the Domain Component (DC) tree in the user/group LDAP that is used to resolve a user entry in Sun Java System LDAP Schema v.1. 

ldapusersession.domainfilter 

(|(objectclass=inetDomain)(objectclass=inetDomainAlias)) 

Defines the filter used to identify a domain entry. 

ldapusersession.ldappoolmin 

 

Specifies the minimum number of LDAP client connections maintained. 

ldapusersession.ldappoolmax 

 

Specifies the maximum number of LDAP client connections maintained. 

ldapusersession.ldappooltimeout 

 

Specifies the number of seconds before timing out an LDAP connection. 

Increase this value to accommodate large search results. 

ldapusersession.enablessl 

 

Specifies whether the directory against which authentication is to be performed is in SSL mode. 

Change the default value to “true” to setup a secure LDAP connection. 

Common Auth Configuration 

   

uwcauth.sessioncookie 

JSESSIONID 

Specifies the name of the cookie used by the servlet container to monitor sessions. 

This value should not be changed. 

uwcauth.appprefix 

 

Specifies the prefix for the host application used to find cookies generated by other trusted applications for single sign-on. 

If the deployment uses Messaging SSO, this attribute should be assigned the value of local.webmail.sso.prefix set during messaging server configuration.

uwcauth.appid 

uwc 

Specifies the cookie name containing the unique application ID for the host application. 

messagingsso.appid 

ims 

Communications Express uses this cookie to determine whether to issue the logout request to Messenger Express. 

The value of messagingsso.appid should be same as the value of local.webmail.sso.id set during messaging configuration.

uwcauth.cookiedomain 

 

Specifies the domain or path saved as part of the single sign-on cookie. 

MessagingSSOAuth Filter Configuration 

   

uwcauth.messagingsso.enable 

 

Enables or disables messaging single sign-on functionality. 

Set this parameter to “true” to enable single sign-on and “false” to disable single sign-on. 

Make sure that uwcauth.messagingsso.enable is set to “false” when setting up Communications Express for Access Manager Single Sign-On. 

uwcauth.messagingsso.cookiepath 

Specifies the URI for which the single sign-on cookie is saved. 

messagingsso.xxx.url 

http://servername/VerifySSO? 

Specifies the URL used to verify the SSO cookie. 

The value of xxx should be replaced by the application ID of the server. 

The value of xxx mentioned here should be identical to the value assigned in Messenger Express to local.webmail.sso.id.

messagingsso.uwc.url 

http://servername:85/iuwc/VerifySSO?When Communications Express is not deployed under “/”, such as /uwc, the value of the parameter may look like: 

http://servername:85/uwc/VerifySSO? 

Specifies the verify URL of Communications Express. 

If you have edited the value of uwcauth.appid for this server, replace uwc in messagingsso.uwc.url with the new uwcauth.appid.

Identity SSO 

   

uwcauth.identity.enabled 

 

Specifies whether Access Manager is enabled. 

Set the attribute to “true” to enable Access Manager. Set the attribute to “false” to disable Access Manager. Initially the value is set in the configurator. 

uwcauth.identity.login.url 

http://nicp160.india.sun.com:99/amserver/UI/Login 

Specifies the Login Page URL of the Indentity Server 

uwcauth.identity.binddn 

 

Specifies the complete DN of the amadmin. 

For example, 

uid=amAdmin, ou=People, o=siroe.example.com, o=example.com

Note: The uwcauth.identity.binddn and uwcauth.identity.bindcred values should correspond to the values entered when installing Access Manager.

For example, uwcauth.identity.binddn=uid=amAdmin, ou=People, o=siroe.example.com, o=example.com and uwcauth.identity.bindcred=password.

uwcauth.identity.bindcred 

 

Specifies the password of the amadmin. 

uwcauth.identity.cookiename 

iPlanetDirectoryPro 

Specifies the Access Manager session cookie name. 

Ensure that in the uwcauth.properties file, the value of uwcauth.identity.cookiename is set to the value of local.webmail.sso.amcookiename.

uwcauth.http.port 

80 

Specifies the port number that Communications Express listens to when Communications Express is configured on a non SSL port. 

uwcauth.https.port 

443 

Specifies the HTTPS port number that Communications Express listens to when Communications Express is configured on Web Server. 

uwcauth.identitysso.cookiepath 

Specifies the Identity SSO Cookie Path 

identitysso.singlesignoff 

 

Enables or disables identity single sign-on functionality. 

If this attribute is set to true, all applications participating in this IS session are signed out when the users logs out. 

If this attribute is set to false, only Communication Express session is disabled and the user will be taken to the URL configured in identitysso.portalurl.

identitysso.portalurl 

 

Specifies the verify URL of Communications Express. 

If Access Manager is enabled and single sign-off is set to false, Communication Express displays the identitysso.portalurl.

pab_mig_required 

true 

Specifies whether the address book directories should to be migrated. 

Set the attribute to ”true’ if pab migration is required otherwise set the parameter to 'false'. 

uwclogging.properties file

Table D-6, lists the parameters of the uwclogging.properties file.

Table D–6 Default Logging Configuration File

Parameters 

Default Value 

Description 

uwc.logging.enable 

no 

Enables or disables logging. To enable logging, change the default value to yes. 

uwc.log.file 

/var/opt/SUNWuwc/logs/ 

uwc.log 

Specifies the location of the log file. 

Change the location of the file if required. 

uwc.log.level 

INFO 

Specifies the log level for the application. Change the log level for the application to the desired level. 

The log level values available are: 

WARNING,INFO, and FINE, SEVERE. 

uwc.log.formatter 

SimpleFormatter 

Describes the configuration information for Handlers. 

By default, the formatter is the SimpleFormatter. You could also specify XMLFormatter 

uwcdomainconfig.properties

The uwcdomainconfig.properties file contains all the options that can be configured on a per-domain basis. The following options are the default user preferences for the domain.

If values for these preferences are not set, the preferences will be created with the values mentioned in Table D-7.

Table D–7 Parameters in uwcdomainconfig.properties

Parameters 

Default Value 

Description 

Global options 

   

uwc-user-attr-locale 

en 

Specifies the default locale used for the domain. 

uwc-user-attr-sunUCDefault 

Application 

addressbook 

Specifies the default page to be displayed after you login. The available options are: mail, calendar, and addressbook.

uwc-user-attr-sunUCTheme 

uwc 

Specifies the default display theme. 

Note: Currently we support per domain theme, but do not support per user themes. 

Refer to Sun Java System Communications Express Customization Guide for more details.

uwc-user-attr-sunUCColorScheme 

Specifies the default display color scheme. 

uwc-user-attr-sunUCDefaultEmailHandler 

uc 

Specifies the default email client used to send email messages from the application. 

You can set the default email client to Messenger Express or to a browser mail client.

uwc-user-attr-sunUCDateFormat 

M/D/Y 

Specifies the order in which the date, month, and year should appear in a date. 

The available options are: 

M/D/Y, D/M/Y, Y/M/D 

uwc-user-attr-sunUCDateDelimiter 

Specifies the delimiter used in dates. 

Delimiter is the character that separates the date, month, and year in the date. 

You can specify the delimiter as a comma(,), forward slash (/), or hyphen(-). 

uwc-user-attr-sunUCTimeFormat 

12 

Specifies the time display format. The available formats are 12 or 24 hour formats. 

uwc-user-attr-sunUCTimeZone 

America/Los_Angeles 

Specifies the time zone in which your calendar is created.

You can choose any valid time zone from the following areas: 

North and South America, Europe and Africa, Asia and Pacific Rim. 

supportedLanguages 

 

Specifies the list of supported languages for a domain. Each language in the list is separated by a semi colon. You can define the list of languages Communications Express will support for a domain. 

For example, en;es;de;fr;ja;ko;zh-CN;zh-TW 

User\qs Calendar Options 

   

uwc-user-attr-icsExtendedUserPrefs-ceDefaultView 

dayview 

Specifies the view your default calendar should display after you login. The available options are:

dayview, weekview, monthview, and yearview. 

uwc-user-attr-icsExtendedUserPrefs-ceShowCompletedTasks 

false 

Specifies whether the completed tasks will appear in the Tasks pane of the calendar. 

Change the default value to “true” if you want the completed tasks to appear in the Tasks pane of the calendar. 

uwc-user-attr-icsExtendedUserPrefs-ceDefaultCategory 

Business 

Specifies the default category in which the new events or tasks should be created.

The categories available are: 

Anniversary, Appointment, Birthday, Business, Breakfast, Class, Conference Call, Dinner, Holiday, Lunch, Meeting, Other, Personal, Seminar, Training, Travel, Vacation and Interview.

uwc-user-attr-icsExtendedUserPrefs-ceDayHead 

Specifies the day start time in hours. 

uwc-user-attr-icsExtendedUserPrefs-ceDayTail 

18 

Specifies the day end time in hours. 

uwc-user-attr-icsExtendedUserPrefs-ceInterval 

PT1H0M 

Specifies the interval the day is split into. 

In the day and week view, the day is split into half an hour or one hour time period. 

You can change the default split value to PT0H30M(half hour) 

uwc-user-attr-icsFirstDay 

Specifies the day of the week to be considered as the first day of the week in the calendar. By default, Sunday(1) is considered to be first day of the week and Saturday(7) the last day of the week. 

uwc-user-attr-icsExtendedUserPrefs-ceWeekEndDays 

1,7 

Specifies the days of the week in the calendar views to be considered as weekend days. 

By default, Sunday(1) is the first day of the week and Saturday(7) the last day of the week. 

Comma separated list of numbers represents the days of the week to be considered as weekend days. 

uwc-user-attr-icsExtendedUserPrefs-ceIncludeWeekendInViews 

true 

Enables or disables the display of weekend days in the Week and Month views of your calendar. 

Set the default value to “true” if the weekend days should be displayed in the Week and Month views of the calendar. 

uwc-user-attr-icsExtendedUserPrefs-ceSingleCalendarTZID 

Specifies whether the calendar should be displayed in the calendar’s time zone. 

Change the default value to “0” if you do not want to view calendars in the calendar’s time zone. When the value is set to zero, all calendars will be displayed in the time-zone specified in the Global Options tab. 

uwc-user-attr-icsExtendedUserPrefs-ceAllCalendarTZIDs 

Defines the boolean value, which specifies that the time zone of all the displayed calendar should be used instead of users time zone. 

uwc-user-attr-icsExtendedUserPrefs-ceDefaultAlarmStart 

PT0H30M 

Specifies the default number of hours and minutes, before an event or task, a reminder should be sent. 

uwc-user-attr-icsExtendedUserPrefs-ceNotifyEnable 

Specifies whether to send email messages containing ical attachments, to internal invitees when new events are created. 

uwc-user-attr-icsExtendedUserPrefs-sunCalEventfilter 

 

Defines the default invitations to be viewed in the calendar. 

The options available are: accepted, tentative, declined, needs-action. 

Address Book Default Option Values 

   

uwc-user-attr-sunAbExtendedUserPrefs-abName 

Personal Address Book 

Specifies the name of the default address book. 

uwc-user-attr-sunAbExtendedUserPrefs-abDescription 

This is the personal address book 

Specifies a short description for the default address book. 

uwc-user-attr-sunAbExtendedUserPrefs-abEntriesPerPage 

25 

Specifies the maximum number of address book entries to be displayed on a page. 

The available options are: 25, 50, 75. 

uwc-user-attr-sunAbExtendedUserPrefs-abSearchDisplayColumn1 

displayname 

Specifies the value to be displayed in the first column. By default, the first column displays name of contacts or group. 

uwc-user-attr-sunAbExtendedUserPrefs-abSearchDisplayColumn2 

primaryemail 

Specifies the value to be displayed in the second column of your address book. 

You can set the display column name to: 

displayname, company, title, primaryphone, workphone, homephone, faxphone, pagerphone, primaryemail, email2, email3, homeaddress, workaddress, weburl1, weburl2, calendarurl, freebusyurl, birthday, anniversary ,ou, edit, viewcalendar.

uwc-user-attr-sunAbExtendedUserPrefs-abSearchDisplayColumn3 

primaryphone 

Specifies the value to be displayed in the third column of your address book. 

You can set the display column name to: 

displayname, company, title, primaryphone, workphone, homephone, faxphone, pagerphone, primaryemail, email2, email3, homeaddress, workaddress, weburl1, weburl2, calendarurl, freebusyurl, birthday, anniversary ,ou, edit, viewcalendar.

uwc-user-attr-sunAbExtendedUserPrefs-abSearchDisplayColumn4 

edit 

Specifies the value to be displayed in the fourth column of your address book. 

You can set the display column name to: 

displayname, company, title, primaryphone, workphone, homephone, faxphone, pagerphone, primaryemail, email2, email3, homeaddress, workaddress, weburl1, weburl2, calendarurl, freebusyurl, birthday, anniversary ,ou, edit, viewcalendar.

uwc-mail-options-isSpamDetectEnabled 

false 

Specifies whether the spam detection filters should be shown to the user or not. 

personalstore.properties file

Table D-8, list the parameters of the personalstore.properties file.

Table D–8 Parameters in personalstore.properties

Parameters 

Default Value 

Description 

db.psrootattribute 

psRoot 

Defines the psRoot Attribute name. 

db.useUserPsRoot 

false 

Specifies whether the per User psRoot should be used or not. Set the attribute to ’true” to use the attribute. Otherwise set the attribute to “false.” 

db.defaultpsrootpattern 

 

Specifies the default psroot pattern to be used when db.useUserPsRoot attribute is set to true.

For example, 

ldap:///piPStoreOwner=%U,o=%D,o=PiServerDb

db.psurlprefix 

ps 

Defines the protocol prefix of PS URLs 

db.defaultpspath 

defaultps 

Defines the path where the defaultps values are stored.There exists one path per domain with dictionary files for each locale. 

db.maxpagedsearch 

 

Specifies the max number of simultaneously paged search for an instance of PersonalStore