The tasks you must perform to install and configure N1 Grid Service Provisioning System Remote Agent in the failover zone are as follows:
Example: Preparing the Cluster for N1 Grid Service Provisioning System Remote Agent
Example: Configuring Cluster Resources for N1 Grid Service Provisioning System Remote Agent
Example: Installing the N1 Grid Service Provisioning System Remote Agent Software on Shared Storage
Example: Modifying the N1 Grid Service Provisioning System Remote Agent Configuration File
Install and configure the cluster as instructed in Sun Cluster Software Installation Guide for Solaris OS.
Install the following cluster software components on both nodes.
Sun Cluster core software
Sun Cluster data service for N1 Grid Service Provisioning System
Sun Cluster HA for Solaris Container
Register the necessary data types on one node.
phys-schost-1# clresourcetype register SUNW.gds SUNW.HAStoragePlus |
Create the N1 Grid Service Provisioning System resource group.
phys-schost-1# clresourcegroup create -n phys-host-1:clu1,phys-host-2:clu1 RG-SPSRA |
Create the logical host.
phys-schost-1# clreslogicalhostname create -g RG-SPSRA ha-host-1 |
Create the HAStoragePlus resource in the RG-SPSRA resource group.
phys-schost-1# clresource create -g RG-SPSRA -t SUNW.HAStoragePlus -p AffinityOn=TRUE \ > -p FilesystemMountPoints=/global/mnt3,/global/mnt4 RS-SPSRA-HAS |
Enable the resource group.
phys-schost-1# clresourcegroup online -M RG-SPSRA |
On shared cluster storage, create a directory for the failover zone root path.
This example presents a sparse root zone. You can use a whole root zone if that type better suits your configuration.
phys-schost-1# mkdir /global/mnt3/zones |
Create a temporary file, for example /tmp/x, and include the following entries:
create -b set zonepath=/global/mnt3/zones/clu1 set autoboot=false set pool=pool_default add inherit-pkg-dir set dir=/lib end add inherit-pkg-dir set dir=/platform end add inherit-pkg-dir set dir=/sbin end add inherit-pkg-dir set dir=/usr end add net set address=ha-host-1 set physical=hme0 end add attr set name=comment set type=string set value="N1 Grid Service Provisioning System cluster zone" Put your desired zone name between the quotes here. end |
Configure the failover zone, using the file you created.
phys-schost-1# zonecfg -z clu1 -f /tmp/x |
Install the zone.
phys-schost-1# zoneadm -z clu1 install |
Log in to the zone.
phys-schost-1# zlogin -C clu1 |
Open a new window to the same node and boot the zone?
phys-schost-1a# zoneadm -z clu1 boot |
Close this terminal window and disconnect from the zone console.
phys-schost-1# ~~. |
Copy the containers configuration file to a temporary location.
phys-schost-1# cp /opt/SUNWsczone/sczbt/util/sczbt_config /tmp/sczbt_config |
Edit the /tmp/sczbt_config file and set variable values as shown:
RS=RS-SPSRA-ZONE RG=RG-SPSRA PARAMETERDIR=/global/mnt3/zonepar SC_NETWORK=false SC_LH= FAILOVER=true HAS_RS=RS-SPSRA-HAS Zonename=clu1 Zonebootopt= Milestone=multi-user-server Mounts= |
Create the zone according to the instructions in the Sun Cluster Data Service for Solaris Containers Guide.
Register the zone resource.
phys-schost-1# ksh /opt/SUNWsczone/sczbt/util/sczbt_register -f /tmp/sczbt_config |
Enable the zone resource.
phys-schost-1# clresource enable RS-SPSRA-ZONE |
These steps illustrate how to install the N1 Grid Service Provisioning System software. As long as only one node is mentioned it needs to be the node where your resource group is online.
Log in to the zone.
phys-schost-1# zlogin clu1 |
Add the sps user.
zone-1# groupadd -g 1000 sps zone-1# useradd -g 1000 -d /global/mnt3/sps -m -s /bin/ksh sps |
Install the N1 Grid Service Provisioning System binaries.
zone-1# cd /installation_directory zone-1# ./cr_ra_solaris_sparc_5.2.sh |
Answer on the following cluster relevant questions as follows:
What base directory ... default: /opt/SUNWn1sps) [<directory>] /global/mnt3/sps |
Which user will own the N1 SPS Remote Agent distribution? (default: n1sps) [<valid username>] sps |
Which group on this machine will own the N1 SPS Remote Agent distribution? (default: n1sps) [<valid groupname>] sps |
What is the hostname or IP address of the interface on which the Agent will run? (default: phys-schost-1) ha-host-1 |
For all the other values, you can accept the defaults, or chose appropriate values. For the simplicity of this example we assume the default values of all port values.
Leave the zone.
Copy the N1 Grid Service Provisioning System configuration file from the agent directory to its deployment location.
phys-schost-1# cp /opt/SUNWscsps/remoteagent/util/spsra_config /global/mnt3 |
Add this cluster's information to the spsra_config configuration file.
The following listing shows the relevant file entries and the values to assign to each entry.
. . . RS=RS-SPSRA RG=RG-SPSRA PORT= LH= USER=sps BASE=/global/mnt3/sps/N1_Service_Provisioning_System HAS_RS=RS-SPSRA-HAS. . . ZONE=clu1 ZONE_BT=RS-SPSMA-ZONE PROJECT= |
Save and close the file.