Install and configure the cluster as instructed in Sun Cluster Software Installation Guide for Solaris OS.
Install the following cluster software components on node Vigor5.
Sun Cluster core software
Sun Cluster data service for Samba
Add the logical host name to /etc/hosts and /etc/inet/ipnodes on the HA container.
Vigor5# zlogin failover grep SMB1 /etc/hosts /etc/inet/ipnodes /etc/hosts:192.168.1.132 SMB1#20 /etc/inet/ipnodes:192.168.1.132 SMB1#20 |
Install and configure a Zettabyte File System.
The following zpool definition represents a very basic configuration for deployment on a single-node cluster.
You should not consider this example for use within a productive deployment, instead it is a very basic configuration for testing or development purposes only.
Install and Configure a Solaris Volume Manager File System.
The following metaset definitions represent a very basic configuration for deployment on a single-node cluster.
You should not consider this example for use within a productive deployment, instead it is a very basic configuration for testing or development purposes only.
Create a SVM Disk Set.
Vigor5# metaset -s dg_d1 -a -h Vigor5 |
Add a Disk to the SVM Disk Set.
Vigor5# metaset -s dg_d1 -a /dev/did/rdsk/d4 |
Add the Disk Information to the metainit utility input file.
Vigor5# cat >> /etc/lvm/md.tab <<-EOF dg_d1/d100 -m dg_d1/d110 dg_d1/d110 1 1 /dev/did/rdsk/d4s0 EOF |
Configure the metadevices.
Vigor5# metainit -s dg_d1 -a |
Create a Mount Point for the SVM Highly Available Local File System.
Vigor5# mkdir /zones |
Add the SVM highly available local file system to /etc/vfstab.
Vigor5# cat >> /etc/vfstab <<-EOF /dev/md/dg_d1/dsk/d100 /dev/md/dg_d1/rdsk/d100 /zones ufs 3 no logging EOF |
Create the File System.
Vigor5# newfs /dev/md/dg_d1/rdsk/d100 |
Mount the File System.
Vigor5# mount /zones |