After you have added the device group to the protection group, avspg, you can manually enable the Sun StorageTek Availability Suite volume sets. Because the Sun Availability Suite commands are installed in different locations in the supported software versions, the following examples illustrate how to enable volume sets for each software version.
This example manually enables a Solaris Volume Manager volume set when using Sun StorageTek Availability Suite 4.0.
phys-paris-1# /usr/sbin/sndradm -e logicalhost-paris-1 \ /dev/md/avsset/rdsk/d100 /dev/md/avsset/rdsk/d101 \ logicalhost-newyork-1 /dev/md/avsset/rdsk/d100 \ /dev/md/avsset/rdsk/d101 ip async C avsset |
This example manually enables a Solaris Volume Manager volume set when using Sun StorEdge Availability Suite 3.2.1.
phys-paris-1# /usr/opt/SUNWesm/sbin/sndradm -e logicalhost-paris-1 \ /dev/md/avsset/rdsk/d100 /dev/md/avsset/rdsk/d101 \ logicalhost-newyork-1 /dev/md/avsset/rdsk/d100 \ /dev/md/avsset/rdsk/d101 ip async C avsset |
This example manually enables a VERITAS Volume Manager volume set when using Sun StorageTek Availability Suite 4.0.
phys-paris-1# /usr/sbin/sndradm -e logicalhost-paris-1 \ /dev/vx/rdsk/avsdg/vol-data-paris /dev/vx/rdsk/avsdg/vol-bitmap-paris \ logicalhost-newyork-1 /dev/vx/rdsk/avsdg/vol-data-newyork \ /dev/vx/rdsk/avsdg/vol-bitmap-newyork ip async C avsdg |
This example manually enables a VERITAS Volume Manager volume set when using Sun StorEdge Availability Suite 3.2.1.
phys-paris-1# /usr/opt/SUNWesm/sbin/sndradm -e logicalhost-paris-1 \ /dev/vx/rdsk/avsdg/vol-data-paris /dev/vx/rdsk/avsdg/vol-bitmap-paris \ logicalhost-newyork-1 /dev/vx/rdsk/avsdg/vol-data-newyork \ /dev/vx/rdsk/avsdg/vol-bitmap-newyork ip async C avsdg |
This example manually enables a raw device volume set when using Sun StorageTek Availability Suite 4.0.
phys-paris-1# /usr/sbin/sndradm -e logicalhost-paris-1 \ /dev/did/rdsk/d3s3 /dev/did/rdsk/d3s4 logicalhost-newyork-1 /dev/did/rdsk/d3s5 \ /dev/did/rdsk/d3s6 ip async C dsk/d3 |
This example manually enables a raw device volume set when using Sun StorEdge Availability Suite 3.2.1.
phys-paris-1# /usr/opt/SUNWesm/sbin/sndradm -e logicalhost-paris-1 \ /dev/did/rdsk/d3s3 /dev/did/rdsk/d3s4 logicalhost-newyork-1 /dev/did/rdsk/d3s5 \ /dev/did/rdsk/d3s6 ip async C dsk/d3 |
Information about the sndradm command execution is written to the Sun StorageTek Availability Suite log file at the following locations:
When using Sun StorageTek Availability Suite 4.0, /var/adm/ds.log
When using Sun StorEdge Availability Suite 3.2.1, /var/opt/SUNWesm/ds.log
Refer to this file if errors occur while manually enabling the volume set.