test

Sun Cluster Data Service for N1 Grid Service Provisioning System for Solaris OS

How to Register and Configure Sun Cluster HA for N1 Service Provisioning System Local Distributor as a failover data service

This procedure assumes that you installed the data service packages.

If you did not install the Sun Cluster HA for N1 Service Provisioning System packages, go to Installing the Sun Cluster HA for N1 Grid Service Provisioning System Packages.

  1. Become superuser on one of the nodes in the cluster that will host N1 Grid Service Provisioning System Local Distributor.

  2. Register the SUNW.gds resource type.


    # scrgadm -a -t SUNW.gds

  3. Configure the registration scripts for each required N1 Grid Service Provisioning System Local Distributor instance.


    # cd /opt/SUNWscsps/localdist/util
# cp spsld_config desired place
# cp spsld_register desired place

    Edit the spsld_config file and follow the comments within that file. For example:


    #
# Copyright 2003 Sun Microsystems, Inc.  All rights reserved.
# Use is subject to license terms.
#
# This file will be sourced in by spsld_register and the parameters
# listed below will be used.
#
# These parameters can be customized in (key=value) form
#
#        RS - name of the resource for the application
#        RG - name of the resource group containing RS
#      PORT - name of the port number to satisfy GDS registration
#        LH - name of the LogicalHostname SC resource
#      USER - name of the owner of the local distributor
#      BASE - name of the directory where the N1 Service Provisioning Server
#             is installed
#    HAS_RS - name of the HAStoragePlus SC resource
#

RS=
RG=
PORT=22
LH=
USER=
BASE=
HAS_RS=

    The following is an example for N1 Grid Service Provisioning System 4.1 Local Distributor.


    RS=N1spsld-res
RG=N1spsld-rg
PORT=22
LH=N1spsld-lh
USER=sps
BASE=/global/sps/N1_Service_Provisioning_System_4.1
HAS_RS=N1spsld-hastplus-res

    The PORT variable is needed to satisfy the requirements of the generic data service.

  4. After editing spsld_config register the resource.


    # ./spsld_register
Registration of resource N1spsld-rs succeeded
Validate resource N1spsld-rs in resourcegroup N1spsld-rg
Validation of resource N1spsld-rs succeeded

  5. Enable each N1 Grid Service Provisioning System Local Distributor resource.


    # scstat -g


    # scswitch -e -j N1spsra-resource

Repeat Step 3 to Step 5 for each N1 Grid Service Provisioning System Local Distributor instance you need.