|
Step 1
|
- Check the power source, air conditioning equipment, and location of the installation site. For details, see the SPARC Enterprise M8000/M9000 Servers Site Planning Guide.
|
Step 2
|
- Unpack the product package by referencing the SPARC Enterprise M8000/M9000 Servers Unpacking Guide, which comes with the server.
|
Step 3
|
- Install the main unit. If there is an expansion cabinet to be connected to the SPARC Enterprise M9000 or a power supply cabinet to be mounted in the SPARC Enterprise M8000 or SPARC Enterprise M9000, connect each of them to the relevant cabinet. For details, see the SPARC Enterprise M8000/M9000 Servers Installation Guide.
|
Step 4
|
- Connect the input power cables to the main unit. For details, see the SPARC Enterprise M8000/M9000 Servers Installation Guide.
|
Step 5
|
- Connect the console to the main unit. For details, see the SPARC Enterprise M8000/M9000 Servers Installation Guide.
|
Step 6
|
- Turn on the circuit breakers of the main unit. For details, see the SPARC Enterprise M8000/M9000 Servers Installation Guide.
|
Step 7
|
- Set necessary information for hardware. For details, see relevant hardware manuals.
|
Step 8
|
- Turn on the power to the main unit. POST is automatically executed after power-on. For details, see the SPARC Enterprise M8000/M9000 Servers Installation Guide.
|
Step 9
|
- Set a LAN port on the XSCF unit and connect it. See the SPARC Enterprise M8000/M9000 Servers Installation Guide.
|
Step 10
|
- If you are installing other peripheral devices in the main unit, proceed to Step 11.
- If you are not installing peripheral devices in the main unit, proceed to Step 14.
|
Step 11
|
- Turn off the power to the main unit. For details, see the SPARC Enterprise M8000/M9000 Servers Installation Guide.
|
Step 12
|
- Install other peripheral devices. For details, see the manuals supplied with each peripheral device.
|
Step 13
|
- Turn on the power to the main unit. POST is automatically executed after power-on. For details, see the SPARC Enterprise M8000/M9000 Servers Installation Guide.
|
Step 14
|
- Check the network connection of the domain. For details, see the SPARC Enterprise M8000/M9000 Servers Installation Guide.
|
Step 15
|
- Confirm the operation by using the Oracle VTS software. For details, see the SPARC Enterprise M8000/M9000 Servers Installation Guide and the Oracle VTS user's guide.
|
Step 16
|
- Perform the setup required for the operation of the system. For details, see the SPARC Enterprise M3000/M4000/M5000/M8000/M9000 Servers Administration Guide.
|