How to Enable Sun Cluster Geographic Edition Software

This procedure enables the Sun Cluster Geographic Edition infrastructure on the local cluster only. Repeat this procedure on all the clusters of your geographically separated cluster.

Before You Begin

Ensure that the following conditions are met:

• The cluster is running the Solaris Operating System and Sun Cluster software.

• The Sun Cluster management-agent container for Sun Cluster Manager is running.

• Sun Cluster Geographic Edition software is installed.

• The cluster has been configured for secure cluster communication by using security certificates, that is, nodes within the same cluster must share the same security certificates. This is configured during Sun Cluster installation.

  However, when you upgrade to Sun Cluster 3.2 2/08 software, you must copy the security certificates manually from one node of the cluster to the other nodes of the cluster. This action restores identical security certificates on all nodes. For more information about copying the security files for the common agent container, see the procedures in How to Finish Upgrade to Sun Cluster 3.2 2/08 Software in Sun Cluster Upgrade Guide for Solaris OS.

1. Become superuser on a cluster node.

2. Ensure that the logical hostname, which is the same as the cluster name, is available and defined.

   # cluster list

   If the cluster name is not the name that you want to use, change the cluster name with the following command:

   # cluster rename -c newclustername clustername

   -c newclustername

   Specifies the new cluster name.

   clustername

   The cluster whose name you are changing.

   For more information, see the cluster(1CL) man page.

   ---

   Note –

   After you have enabled the Sun Cluster Geographic Edition infrastructure, you must not change the cluster name while the infrastructure is enabled.

   ---

3. Confirm that the naming service and the local hosts files contain a host entry that matches the cluster name.

   The local hosts file, hosts, is located in the /etc/inet directory.

4. On a node of the cluster, start the Sun Cluster Geographic Edition infrastructure.

   # geoadm start

   The geoadm start command enables the Sun Cluster Geographic Edition infrastructure on the local cluster only. For more information, see the geoadm(1M) man page.

5. Verify that you have enabled the infrastructure and that the Sun Cluster Geographic Edition resource groups are online.

   # geoadm show # clresourcegroup status geo-clusterstate geo-infrastructure # clresource status -g geo-clusterstate,geo-infrastructure

   The output for the geoadm show command displays that the Sun Cluster Geographic Edition infrastructure is active from a particular node in the cluster.

   The output for the clresourcegroup status and clresource status commands display that the geo-failovercontrol, geo-hbmonitor, and geo-clustername resources and the geo-infrastructure resource group is online on one node of the cluster. The geo-clusterstate resource group is online on both nodes.

   For more information, see the clresourcegroup(1CL) and clresource(1CL) man pages.

Example 3–1 Enabling the Sun Cluster Geographic Edition Infrastructure on a Cluster

This example enables Sun Cluster Geographic Edition software on the cluster-paris cluster.

1. Start the Sun Cluster Geographic Edition infrastructure on cluster-paris.

   phys-paris-1# geoadm start

2. Ensure that the Sun Cluster Geographic Edition infrastructure was successfully enabled.

   phys-paris-1# geoadm show --- CLUSTER LEVEL INFORMATION --- Sun Cluster Geographic Edition is active on cluster-paris from node phys-paris-1 Command execution successful phys-paris-1#

3. Verify the status of the Sun Cluster Geographic Edition resource groups and resources.

   phys-paris-1# clresourcegroup status geo-clusterstate geo-infrastructure === Cluster Resource Groups === Group Name Node Name Suspended Status ---------- --------- --------- ------ geo-clusterstate phys-paris-1 No Online phys-paris-2 No Online geo-infrastructure phys-paris-1 No Online phys-paris-2 No Offline phys-paris-1# clresource status -g geo-clusterstate,geo-infrastructure === Cluster Resources === Resource Name Node Name State Status Message ------------- --------- ----- -------------- geo-clustername phys-paris-1 Online Online - LogicalHostname online. phys-paris-2 Offline Offline geo-hbmonitor phys-paris-1 Online Online - Daemon OK phys-paris-2 Offline Offline geo-failovercontrol phys-paris-1 Online Online - Service is online. phys-paris-2 Offline Offline

Next Steps

Configure trust between partner clusters. Go to How to Configure Trust Between Two Clusters.