Perform a switchover of a Hitachi TrueCopy or Universal Replicator protection group when you want to migrate services to the partner cluster in an orderly fashion. A switchover consists of the following:
Application services are offline on the former primary cluster, cluster-paris.
For a reminder of which cluster is cluster-paris, see Example Sun Cluster Geographic Edition Cluster Configuration in Sun Cluster Geographic Edition System Administration Guide.
The data replication role is reversed and now continues to run from the new primary, cluster-newyork, to the former primary, cluster-paris.
Application services are brought online on the new primary cluster, cluster-newyork.
This section provides the following information:
When a switchover is initiated by using the geopg switchover command, the data replication subsystem runs several validations on both clusters. The switchover is performed only if the validation step succeeds on both clusters.
First, the replication subsystem checks that the Hitachi TrueCopy or Universal Replicator device group is in a valid aggregate device group state. Then, it checks that the local device group states on the target primary cluster, cluster-newyork, are 23, 33, 43, or 53. The local device group state is returned by the pairvolchk -g device-group-name -ss command. These values correspond to a PVOL_PAIR or SVOL_PAIR state. The Hitachi TrueCopy or Universal Replicator commands that are run on the new primary cluster, cluster-newyork, are described in the following table.
Table 3–1 Hitachi TrueCopy and Universal Replicator Switchover Validations on the New Primary Cluster
Aggregate Device Group State |
Valid Device Group State on Local Cluster |
Hitachi TrueCopy or Universal Replicator Switchover Commands That Are Run on cluster-newyork |
---|---|---|
SMPL |
None |
None |
Regular primary |
23, 43 |
No command is run, because the Hitachi TrueCopy or Universal Replicator device group is already in the PVOL_PAIR state. |
Regular secondary |
33, 53 |
horctakeover -g dg [-t] The-t option is specified when the fence_level of the Hitachi TrueCopy or Universal Replicator device group is async. The value is calculated as 80% of the Timeout property of the protection group. For example, if the protection group has a Timeout of 200 seconds, the value of -t used in this command is 80% of 200 seconds, or 160 seconds. |
Takeover primary |
None |
None |
Takeover secondary |
None |
None |
After a successful switchover, at the data replication level the roles of the primary and secondary volumes have been switched. The PVOL_PAIR volumes that were in place before the switchover become the SVOL_PAIR volumes. The SVOL_PAIR volumes in place before the switchover become the PVOL_PAIR volumes. Data replication will continue from the new PVOL_PAIR volumes to the new SVOL_PAIR volumes.
The Local-role property of the protection group is also switched regardless of whether the application could be brought online on the new primary cluster as part of the switchover operation. On the cluster on which the protection group had a Local role of Secondary, the Local-role property of the protection group becomes Primary. On the cluster on which the protection group had a Local-role of Primary, the Local-role property of the protection group becomes Secondary.
For a successful switchover, data replication must be active between the primary and the secondary clusters and data volumes on the two clusters must be synchronized.
Before you switch over a protection group from the primary cluster to the secondary cluster, ensure that the following conditions are met:
The Sun Cluster Geographic Edition software is running on the both clusters.
The secondary cluster is a member of a partnership.
Both cluster partners can be reached.
The protection group is in the OK state.
If you have configured the Cluster_dgs property, only applications that belong to the protection group can write to the device groups specified in the Cluster_dgs property.
Log in to a cluster node.
You must be assigned the Geo Management RBAC rights profile to complete this procedure. For more information about RBAC, see Sun Cluster Geographic Edition Software and RBAC in Sun Cluster Geographic Edition System Administration Guide.
Initiate the switchover.
The application resource groups that are a part of the protection group are stopped and started during the switchover.
# geopg switchover [-f] -m newprimarycluster protectiongroupname |
Forces the command to perform the operation without asking you for confirmation
Specifies the name of the cluster that is to be the new primary cluster for the protection group
Specifies the name of the protection group
This example performs a switchover to the secondary cluster.
# geopg switchover -f -m cluster-newyork tcpg |