environment

Utilice el comando environment para obtener una visión instantánea del estado en que se encuentra el entorno del servidor, lo que incluye las temperaturas, el estado de la fuente de alimentación, el de los indicadores luminosos del panel frontal, la posición del selector, etc. La pantalla utiliza un formato similar al del comando UNIX prtdiag(1m). Por ejemplo:

rsc> environment

==================== Environmental Status ====================

System Temperatures (Celsius):
------------------------------
      CPU0    42
      CPU1    52
       MB0    33
       MB1    27
       PDB    29
      SCSI    25

=================================
Front Status Panel:
-------------------

Keyswitch position is in On mode.

System LED Status:  DISK ERROR      POWER 
                      [OFF]         [ ON]      
                POWER SUPPLY ERROR  ACTIVITY 
                      [OFF]         [ ON]      
                    GENERAL ERROR   THERMAL ERROR  
                      [OFF]         [OFF]      

=================================

Disk LED Status:    OK = GREEN  ERROR = YELLOW
        DISK  5: [EMPTY]    DISK  3: [EMPTY]    DISK  1:    [OK]
        DISK  4: [EMPTY]    DISK  2:    [OK]    DISK  0:    [OK]

=================================

Fan Bank:
---------
Bank      Speed     Status
         (0-255)    
----      -----     ------
 SYS       151        OK

=================================

Power Supplies:
---------------

Supply     Status
------     ------
  0          OK  
  1          OK  

=================================

rsc>