不支援 Plug N Play SCAM Support 選項。
如果已啟用卡片上的 BIOS,請確定 Adaptec SCSISelect BIOS 選項 Reset SCSI Bus at IC Initialization (位於 Advanced Configuration Options 功能表下) 已設定為 Enabled。 在系統啟動時,若看到 Adaptec 標題,請按 Ctrl-A 來執行 SCSISelect 公用程式。
確定系統開機磁碟不在共用 (叢集) 匯流排上。
將 Reset SCSI Bus at IC Initialization 選項設定為 Disabled。
將 Host Adapter BIOS 選項 (位於 Advanced Configuration Options 功能表下) 設定為 Disabled:Not scan。
編輯 /kernel/drv/cadp.conf 檔並新增 property:
allow-bus-reset=0
安裝修補程式後,請重新啟動系統。
cfgadm(1M)replace_device 指令不太能夠用來取代連接到 cadp(7D) 驅動程式所控制之 HBA 的磁碟。
若要取代如此的磁碟,請使用 cfgadm remove_device 指令,後面跟著 cfgadm insert_device 指令,例如:
cfgadm -x remove_device c0::dsk/c0t4d0 cfgadm -x insert_device c0
cadp.bef 真正模式驅動程式在啟動時僅支援 10 片配接卡。 因此,確定開機磁碟連接到前 10 片配接卡之一。請注意,所有目標可用於安裝,且可供 Solaris cadp (保護模式) 驅動程式使用。
無法在 Seagate ST19171W 9 GB 磁碟機上執行 format(1M) 指令。
若通道 B 具有架構在 Adaptec AIC-7895 晶片 (如 AHA-2940U Dual 及 AHA-2940UW Dual 系列) 的主機板,則有些主機板將無法支援它。 問題的產生是因為 BIOS 無法正確地指定 PCI 中斷 INTA 及 INTBchip,它們位於包含 AIC-7895 晶片的介面槽上。這將使得連接到通道 B 的裝置無法執行,而且關於那些裝置上的逾時及重設的訊息將出現在主控台。
例如,這個問題會發生在 Intel PR440FX (Providence) dual Pentium Pro 主機板,這個主機板在 1.00.08.DI0 之前 (包括這個版本) 的 BIOS 修訂版。對於該主機板,解決方法便是將 "Advanced/PCI IRQ Mapping" 功能設定為 "To ISA Legacy IRQs。" 類似的解決方法可以套用到其他無法支援通道 B 的主機板。
另一種可能的解決方法寫在 Adaptec 的網站: http://www.adaptec.com/support/faqs/aha394x.html。
當您在內部寬介面上使用窄 SCSI CD-ROM 光碟機時,若遇到問題,請在 Adaptec 配置公用程式中,對該裝置停用 "negotiate wide、" "negotiate sync" 或兩者。
發現 Fujitsu 窄磁碟 (M1603SAU) 重覆選取無效的佇列標記 ID。 這不但違返 SCSI 協定,也使得 cadp 驅動程式無法正確 作業。因為難以避免這種問題,所以最好的方法便是停用這些目標的標記佇列。
使用 iostat -E 指令,可決定您是否擁有 Fujitsu M1603S-512 磁碟。 若有,請編輯 /kernel/drv/cadp.conf 檔案並新增屬性target n -scsi -options=0x1f78,其中 n 是目標號碼。
不支援 IBM 外部寬磁碟 (DFHSS2W, 修訂版 1717)。