如果 SCSI 磁碟機並未定義為系統磁碟機內任何實體包的一部份,它將自動標示為等候磁碟機。如果系統磁碟機內有任何 SCSI 磁碟失效,則等候磁碟機上的資料可能會因為等候取代程序而流失。如果使用多餘層次 (RAID 層次 1、5 及 6) 來配置失效的磁碟機,且它的大小等於可用等候磁碟機的大小,則這個取代程序將覆寫等候磁碟機。
因此,即使等候磁碟機是實體連接的,系統仍會拒絕存取它,所以不會有資料意外流失。
除了等候重建磁碟機外 (這會在製造商的使用者指南中加以描述),這些控制器不支援熱插式功能。
若要新增或移除裝置,請關閉系統、新增或移除系統、使用供應商的配置公用程式重新配置 HBA,以及重新配置-重新啟動 (b -r) 您的系統。
驅動程式不支援可變長度的磁帶機或多捲備份,或復置連接到控制器的磁帶機。
因為 Mylex 韌體限制,所以當 SCSI 磁帶及 CD-ROM 裝置在同時也含有 SCSI 硬碟機的通道上連接時,SCSI 磁帶及 CD-ROM 裝置將不會穩定地運作。不過,在較新的 PCI SCSI 卡 (如 DAC960PG 及 DAC960PJ),已沒有這個限制。任何 Mylex 卡的最新韌體可從它的網站取得。
無法使用大於 32 KB 的磁帶區塊大小。為了確定能夠在所有卡上進行正確的 SCSI 裝置作業,請僅在未使用的通道上使用 SCSI 磁帶及 CR-ROM 裝置,且固定區塊大小為 32 KB 或更少。
長型磁帶指令 (消除大型磁帶) 可能失效,因為 Mylex控制器具有一小時的逾時值,這是指令的最大逾時值。
僅對正式通過測試,且 Mylex Corporation 同意它們使用 DAC960 控制器家族的 SCSI 磁碟機啟用標記佇列。不然,請停用標記佇列,以避免發生問題。
指令 mt erase 可運作,但是當它到達磁帶尾端時,可能會報告下列錯誤訊息:
/dev/rmt/0 erase failed: I/O error |
您可以忽略這則訊息。