本章描述已知的文档问题。
本产品的名称是 Solaris 8 10/01, 但是代码和路径或软件包路径名称可以使用 Solaris 2.8 或SunOS 5.8。请总是遵循编写的代码或路径。
"Valid and Default Card Types for Client Applications" 一节中的以下文字是错误的而且应该忽略:
For example, suppose you specify iButton, Cyberflex, and CardA as the validcards properties for Application B. Then you specify Cyberflex as the defaultcard property. If Application B accepts only its default card and the user tries to log in to Application B with CardA, then the system displays the message:
Waiting for Default Card |
"Example--Creating User Information on a Smart Card (Command Line) "一节中有一个属性名为 username。 此属性名称有误。此属性应为user。
在 "OCF Client Properties Overview" 和 "Additional Client Configuration Tasks"一节中缺少以下说明:
Do not set the Re-authentication timeout to zero.
在"Setting Up a Smart Card (Overview)"一章中缺少以下说明:
Payflex cards do not support multiple profiles.Do not use Payflex cards in cases where a user needs to login to the desktop and one or more secure applications.
"本地化的新特性的列表"没有包含在安装 Kiosk 中。
解决办法: 有关本地化的列表,请参见在 Solaris 8 桌面用户增补材料、 Solaris 8 System Administration Supplement、 Solaris 8 Software Developer Supplement 或 Solaris 8 安装增补中的"新功能一览表" 。
在 AnswerBook2 软件中的CDE User's Guide有些图形在西班牙语、意大利语和德语环境中不可读出。
解决办法: 参见 http://docs.sun.com 上的 CDE User's Guide中的可读图形。
AnswerBook2 软件已经升级至版本 1.4.3 , 但文档引用的版本号仍为 1.4.2 版。除了版本号码问题,此文档均是正确的。
4 位"优先级"字段的描述反映了已被 RFC 2460 (Solaris 8 执行 RFC 2460) 淘汰了的 RFC 1883。 结果,"优先级"字段已经被 8 位"通信类"字段所替代。 IPv6 标题格式图形应该标识"通信类"字段而不标识"优先级"字段。 此页面上的"优先级"项目也应该由如下的"通信类"描述所替代:
This new value also reduces the number of bits that are allocated to the "Flow Label" field to 20 bits.
4 位"优先级"字段的描述反映了已被 RFC 2460 (Solaris 8 执行 RFC 2460) 淘汰了的 RFC 1883。结果,"优先级"字段已被 8 位"通信类"字段所替换。"优先级"部分应替换为以下的"通信类"部分。
Originating nodes and forwarding routers can use the 8-bit Traffic Class field in the IPv6 header to identify and distinguish between different classes or priorities of IPv6 packets.
The following general requirements apply to the Traffic Class field.
The service interface to the IPv6 service within a node must provide a means for an upper-layer protocol to supply the value of the Traffic Class bits in packets that were originated by that upper-layer protocol. The default value must be zero for all 8 bits.
Nodes that support a specific use of some or all of the Traffic Class bits can change the value of those bits in packets that they originate, forward, or receive, as required for that specific use. Nodes should ignore and leave unchanged any bits of the Traffic Class field for which they do not support a specific use.
此过程中的步骤 10c 不恰当地忽略了添加到 /etc/hostname.ip.tun0 文件中的行中所要求的 up 参数的添加。结果,必须将 up 参数添加在该步骤的行项的结尾。
适用于该节的一些校正:
改变符号名为 nfs_allow_preepoch_time 。
改变描述为, "This symbol controls whether the NFS client or server allows file timestamps that precede 1970."
对缺省的描述不做任何更改。
删除 nfs_acl_cache 符号项。
添加 nfs_disable_rddir_cache 符号项。
描述: Some servers do not properly update the attributes of the directory when changes are made. To allow interoperability with these broken servers, set this variable to disable the readdir cache.
缺省:设置为 off(0)。
对于 nfs_lookup_neg_cache 和 nfs3_lookup_neg_cache 符号,执行下列操作:
将缺省值变为 1。并忽略有关目录名称高速缓存的注释。
改变描述为 set to ncsize 。By setting the variable to 1, you are effectively disabling the cache, not because an explicit check reveals whether or not the variable 1 but because you are creating a very small cache.
对于nfs_write_error_interval 符号,执行下列操作:
改变描述为 "This symbol controls how often NFS ENOSPC and EDQUOT write error messages are logged. The symbols units are in seconds."
对缺省的描述不做任何更改。
删除 nfsreadmap 符号项。
改变缺省描述为 "Defaults to 1024"。
删除 authkerb_cachesz 符号项。
删除 authkerb_win 符号项。