/cdrom/Solaris_2.x/SUNWxxxx/reloc.cpio: Broken pipe |
Problem |
How to fix the problem |
---|---|
Bug ID: 1212370 This error message does not affect the installation. |
Ignore the message and continue with the installation. |
WARNING: CHANGE DEFAULT BOOT DEVICE |
Problem |
How to fix the problem |
---|---|
IA based systems only The default boot device set in the system's BIOS might be set to a device that requires your using the Solaris 8 Device Configuration Assistant Intel Platform Edition diskette to boot the system. This is an informational message. |
Continue with the installation and, if necessary, change the system's default boot device specified in the BIOS after you install the Solaris software to a device that does not require the Solaris 8 Device Configuration Assistant Intel Platform Edition diskette. |
Problem |
How to fix the problem |
---|---|
IA based systems only IDE disk drives do not automatically map out bad blocks like other drives supported by Solaris software. Before installing Solaris 8 on an IDE disk, you might want to perform a surface analysis on the disk. |
To perform surface analysis on an IDE disk, follow this procedure:
IDE drives do not include a target number. The IDE drive naming convention is cxdy, where cx is the controller number and dy is the device number. |
|
|