本章旨在說明已知的文件問題。
自從本文件在「Solaris 8 2/02 文件 CD」上和「Solaris 8 2/02 安裝 CD」上的「安裝 Kiosk」中發行之後,以下的文件議題已經增添入本章中。
本產品的名稱是 Solaris 8 2/02,但程式碼和路徑或套裝軟體路徑名稱可能會使用 Solaris 2.8 或 SunOS 5.8。 永遠遵守它寫入時的代碼或路徑。
在 "Backing Up a UFS Snapshot" 範例中,以下的 mount 指令不正確。
# mount -F UFS -o ro /dev/fssnap/1 /backups/home.bkup |
下面是正確的 mount 指令。
# mount -F ufs -o ro /dev/fssnap/1 /backups/home.bkup |
以下在 "Valid and Default Card Types for Client Applications" 章節中的文字是不正確的且應被忽略:
For example, suppose you specify iButton, Cyberflex, and CardA as the validcards properties for Application B. Then you specify Cyberflex as the defaultcard property. If Application B accepts only its default card and the user tries to log in to Application B with CardA, then the system displays the message:
Waiting for Default Card |
"Example--Creating User Information on a Smart Card (Command Line) " 單元中有個名稱為 username 的屬性。這個屬性名稱是不正確的。此屬性應稱為 user。
在 "OCF Client Properties Overview" 和 "Additional Client Configuration Tasks" 單元中遺漏了以下的說明:
Do not set the Re-authentication timeout to zero.
在 "Setting Up a Smart Card (Overview)" 章節中遺漏了以下的說明:
Payflex cards do not support multiple profiles. Do not use Payflex cards in cases where a user needs to login to the desktop and one or more secure applications.
已本土化的「新功能清單」並不包括在「安裝 Kiosk」中。
解決方法:如需一份本土化的清單,請參閱 Solaris 8 Desktop User Supplement 中的 "新功能一覽"、Solaris 8 System Administration Supplement、 Solaris 8 Software Developer Supplement 和 Solaris 8 Installation Supplement。
AnswerBook2 中之 CDE 使用者指南裡的某些圖形在西班牙文、義大利文和德文語言環境中是無法讀取的。
解決方法: 請參考位於 http://docs.sun.com 的 CDE 使用者指南以取得可讀圖形。
AnswerBook2 軟體已經升級為 1.4.3 版,但是文件針對說明的還是 1.4.2 版。除了數字方面以外,文件本身是正確的。
目前的敘述不正確。
Adaptec Ultra 裝置是由 cadp 驅動程式所支援,而且這些裝置支援 PCI 熱插式功能。
此敘述應為如下所述:
以下的 Adaptec Ultra SCSI 裝置現在受到 adp 驅動程式的支援,並非受到 cadp 驅動程式的支援。
AHA-2940AU
AHA-2940U
AHA-2940U Dual
AHA-2940UW
AHA-2940UW Dual
AHA-2944UW
AHA-3940AU
AHA-3940AUW
AHA-3940AUWD
AHA-3940U
AHA-3940UW
Solaris 8 參考手冊集合 adp(7D) 和 cadp(7D)
此 4 位元「Priority」欄位的說明指的是 RFC 1883,但是 RFC 1883 已因被 RFC 2460 取代而棄用 (Solaris 8 執行的是 RFC 2460) 。 因此,「Priority」欄位已由一個 8 位元的「Traffic Class」欄位所取代。「IPv6 Header Format」的數字應能辨識「Traffic Class」欄位,而取代「Priority」欄位。本頁中的「Priority」分項符號也應以下面的「Traffic Class」說明來取代:
這個新值也將分配給「Flow Label」欄位的位元數目降低成 20 位元。
此 4 位元「Priority」欄位的說明指的是 RFC 1883,但是 RFC 1883 已因被 RFC 2460 取代而棄用 (Solaris 8 執行的是 RFC 2460) 。 因此,「Priority」欄位已由一個 8 位元的「Traffic Class」欄位所取代。「Priority」區段也應以下面的「Traffic Class」區段來取代。
Originating nodes and forwarding routers can use the 8-bit Traffic Class field in the IPv6 header to identify and distinguish between different classes or priorities of IPv6 packets.
The following general requirements apply to the Traffic Class field.
The service interface to the IPv6 service within a node must provide a means for an upper-layer protocol to supply the value of the Traffic Class bits in packets originated by that upper-layer protocol. The default value must be zero for all 8 bits.
Nodes that support a specific use of some or all of the Traffic Class bits can change the value of those bits in packets that they originate, forward, or receive, as required for that specific use. Nodes should ignore and leave unchanged any bits of the Traffic Class field for which they do not support a specific use.
此程序的步驟 10c 錯誤地將新增入 /etc/hostname.ip.tun0 檔案之行所必須增加的 up 參數省去。結果,up 參數必須在步驟中新增在此行登錄的末端。
若干修正套用在這個單元:
將符號名稱變更為nfs_allow_preepoch_time。
變更說明描述為"此符號控制著 NFS 用戶端或伺服器是否容許 1970 年之前的時間戳記。"
預設的說明描述並無變更。
刪除 nfs_acl_cache 符號項目。
新增 nfs_disable_rddir_cache 符號項目。
說明描述:Some servers do not properly update the attributes of the directory when changes are made. To allow interoperability with these broken servers, set this variable to disable the readdir
預設值:設定為 off(0)。
對於 nfs_lookup_neg_cache 和 nfs3_lookup_neg_cache 符號,請執行以下動作。
將預設值變更為 1。請忽略有關目錄名稱快取記憶體的註釋。
將預設的說明描述變更為:set to ncsize. By setting the variable to 1 you are effectively disabling the cache, not because there is an explicit check to see whether or not it is 1 but because you are creating a very small cache.
對於 nfs_write_error_interval 符號,請執行以下動作。
變更說明描述為"此符號控制著記錄 NFS ENOSPC 及 EDQUOT 寫入錯誤訊息的頻率。其單位是以秒計。"
預設的說明描述並無變更。
刪除 nfsreadmap 符號項目。
對於 authdes_cachesz 符號,請執行以下動作。
變更預設的說明描述"預設值設定為 1024"。
刪除 authkerb_cachesz 符號項目。
刪除 authkerb_win 符號項目。