terminfo(4)

NAME | SYNOPSIS | DESCRIPTION | FILES | SEE ALSO | NOTES

NAME

terminfo– terminal and printer capability database

SYNOPSIS

/usr/share/lib/terminfo/?/*

DESCRIPTION

terminfo is a database that describes the capabilities of devices such as terminals and printers. Devices are described in terminfo source files by specifying a set of capabilities, by quantifying certain aspects of the device, and by specifying character sequences that affect particular results. This database is often used by screen oriented applications such as vi and curses-based programs, as well as by some system commands such as ls and more. This usage allows them to work with a variety of devices without changes to the programs.

terminfo descriptions are located in the directory pointed to by the environment variable TERMINFO or in /usr/share/lib/terminfo. terminfo descriptions are generated by tic(1M).

terminfo source files consist of one or more device descriptions. Each description consists of a header (beginning in column 1) and one or more lines that list the features for that particular device. Every line in a terminfo source file must end in a comma (,). Every line in a terminfo source file except the header must be indented with one or more white spaces (either spaces or tabs).

Entries in terminfo source files consist of a number of comma-separated fields. White space after each comma is ignored. Embedded commas must be escaped by using a backslash. Each device entry has the following format:

---

alias1 | alias2 | . . . | aliasn | fullname, capability1, capability2, . . . capabilityn,

---

The first line, commonly referred to as the header line, must begin in column one and must contain at least two aliases separated by vertical bars. The last field in the header line must be the long name of the device and it may contain any string. Alias names must be unique in the terminfo database and they must conform to system file naming conventions (see tic(1M)); they cannot, for example, contain white space or slashes.

Every device must be assigned a name, such as "vt100". Device names (except the long name) should be chosen using the following conventions. The name should not contain hyphens because hyphens are reserved for use when adding suffixes that indicate special modes.

These special modes may be modes that the hardware can be in, or user preferences. To assign a special mode to a particular device, append a suffix consisting of a hyphen and an indicator of the mode to the device name. For example, the -w suffix means "wide mode"; when specified, it allows for a width of 132 columns instead of the standard 80 columns. Therefore, if you want to use a "vt100" device set to wide mode, name the device "vt100-w." Use the following suffixes where possible.

	Suffix	Meaning	Example
	-w	Wide mode (more than 80 columns)	5410-w
	-am	With auto. margins (usually default)	vt100-am
	-nam	Without automatic margins	vt100-nam
	-n	Number of lines on the screen	2300-40
	-na	No arrow keys (leave them in local)	c100-na
	-np	Number of pages of memory	c100-4p
	-rv	Reverse video	4415-rv

The terminfo reference manual page is organized in two sections:

• PART 1: DEVICE CAPABILITIES

• PART 2: PRINTER CAPABILITIES

PART 1: DEVICE CAPABILITIES

Capabilities in terminfo are of three types: Boolean capabilities (which show that a device has or does not have a particular feature), numeric capabilities (which quantify particular features of a device), and string capabilities (which provide sequences that can be used to perform particular operations on devices).

In the following table, a Variable is the name by which a C programmer accesses a capability (at the terminfo level). A Capname is the short name for a capability specified in the terminfo source file. It is used by a person updating the source file and by the tput command. A Termcap Code is a two-letter sequence that corresponds to the termcap capability name. (Note that termcap is no longer supported.)

Capability names have no real length limit, but an informal limit of five characters has been adopted to keep them short. Whenever possible, capability names are chosen to be the same as or similar to those specified by the ANSI X3.64-1979 standard. Semantics are also intended to match those of the ANSI standard.

All string capabilities listed below may have padding specified, with the exception of those used for input. Input capabilities, listed under the Strings section in the following tables, have names beginning with key_. The #i symbol in the description field of the following tables refers to the ith parameter.

Table 1 Booleans

Variable	Name	Code	Description
auto_left_margin	bw	bw	cub1 wraps from column 0
			to last column
auto_right_margin	am	am	Terminal has automatic margins
back_color_erase	bce	be	Screen erased with background color
can_change	ccc	cc	Terminal can re-define existing color
ceol_standout_glitch	xhp	xs	Standout not erased by overwriting (hp)
col_addr_glitch	xhpa	YA	Only positive motion for hpa/mhpa caps
cpi_changes_res	cpix	YF	Changing character pitch changes
			resolution
cr_cancels_micro_mode	crxm	YB	Using cr turns off micro mode
dest_tabs_magic_smso	xt	xt	Destructive tabs, magic smso char (t1061)
eat_newline_glitch	xenl	xn	Newline ignored after 80 columns
			(Concept)
erase_overstrike	eo	eo	Can erase overstrikes with a blank
generic_type	gn	gn	Generic line type (for example,
			dialup, switch)
hard_copy	hc	hc	Hardcopy terminal
hard_cursor	chts	HC	Cursor is hard to see
has_meta_key	km	km	Has a meta key (shift, sets parity bit)
has_print_wheel	daisy	YC	Printer needs operator to change
			character set
has_status_line	hs	hs	Has extra "status line"
hue_lightness_saturation	hls	hl	Terminal uses only HLS color
			notation (Tektronix)
insert_null_glitch	in	in	Insert mode distinguishes nulls
lpi_changes_res	lpix	YG	Changing line pitch changes resolution
memory_above	da	da	Display may be retained above the screen
memory_below	db	db	Display may be retained below the screen
move_insert_mode	mir	mi	Safe to move while in insert mode
move_standout_mode	msgr	ms	Safe to move in standout modes
needs_xon_xoff	nxon	nx	Padding won't work, xon/xoff required
no_esc_ctlc	xsb	xb	Beehive (f1=escape, f2=ctrl C)
no_pad_char	npc	NP	Pad character doesn't exist
non_dest_scroll_region	ndscr	ND	Scrolling region is nondestructive
non_rev_rmcup	nrrmc	NR	smcup does not reverse rmcup
over_strike	os	os	Terminal overstrikes on hard-copy
			terminal
prtr_silent	mc5i	5i	Printer won't echo on screen
row_addr_glitch	xvpa	YD	Only positive motion for vpa/mvpa caps
semi_auto_right_margin	sam	YE	Printing in last column causes cr
status_line_esc_ok	eslok	es	Escape can be used on the status line
tilde_glitch	hz	hz	Hazeltine; can't print tilde (~)
transparent_underline	ul	ul	Underline character overstrikes
xon_xoff	xon	xo	Terminal uses xon/xoff handshaking

Table 2 Numbers

Variable	Name	Code	Description
bit_image_entwining	bitwin	Yo	Number of passes for each bit-map row
bit_image_type	bitype	Yp	Type of bit image device
buffer_capacity	bufsz	Ya	Number of bytes buffered before printing
buttons	btns	BT	Number of buttons on the mouse
columns	cols	co	Number of columns in a line
dot_horz_spacing	spinh	Yc	Spacing of dots horizontally in dots per inch
dot_vert_spacing	spinv	Yb	Spacing of pins vertically in pins per inch
init_tabs	it	it	Tabs initially every # spaces
label_height	lh	lh	Number of rows in each label
label_width	lw	lw	Number of columns in each label
lines	lines	li	Number of lines on a screen or a page
lines_of_memory	lm	lm	Lines of memory if > lines; 0 means varies
max_attributes	ma	ma	Maximum combined video attributes
			terminal can display
magic_cookie_glitch	xmc	sg	Number of blank characters left by
			smso or rmso
max_colors	colors	Co	Maximum number of colors on the screen
max_micro_address	maddr	Yd	Maximum value in micro_..._address
max_micro_jump	mjump	Ye	Maximum value in parm_..._micro
max_pairs	pairs	pa	Maximum number of color-pairs on the
			screen
maximum_windows	wnum	MW	Maximum number of definable windows
micro_char_size	mcs	Yf	Character step size when in micro mode
micro_line_size	mls	Yg	Line step size when in micro mode
no_color_video	ncv	NC	Video attributes that can't be used
			with colors
num_labels	nlab	Nl	Number of labels on screen (start at 1)
number_of_pins	npins	Yh	Number of pins in print-head
output_res_char	orc	Yi	Horizontal resolution in units per character
output_res_line	orl	Yj	Vertical resolution in units per line
output_res_horz_inch	orhi	Yk	Horizontal resolution in units per inch
output_res_vert_inch	orvi	Yl	Vertical resolution in units per inch
padding_baud_rate	pb	pb	Lowest baud rate where padding needed
print_rate	cps	Ym	Print rate in characters per second
virtual_terminal	vt	vt	Virtual terminal number (system)
wide_char_size	widcs	Yn	Character step size when in double
			wide mode
width_status_line	wsl	ws	Number of columns in status line

Table 3 Strings

Variable	Name	Code	Description
acs_chars	acsc	ac	Graphic charset pairs aAbBcC
alt_scancode_esc	scesa	S8	Alternate escape for scancode emulation
			(default is for vt100)
back_tab	cbt	bt	Back tab
bell	bel	bl	Audible signal (bell)
bit_image_carriage_return	bicr	Yv	Move to beginning of same row (use
			tparm)
bit_image_newline	binel	Zz	Move to next row of the bit image (use
			tparm)
bit_image_repeat	birep	Zy	Repeat bit-image cell #1 #2 times (use
			tparm)
carriage_return	cr	cr	Carriage return
change_char_pitch	cpi	ZA	Change number of characters per inch
change_line_pitch	lpi	ZB	Change number of lines per inch
change_res_horz	chr	ZC	Change horizontal resolution
change_res_vert	cvr	ZD	Change vertical resolution
change_scroll_region	csr	cs	Change to lines #1 through #2 (vt100)
char_padding	rmp	rP	Like ip but when in replace mode
char_set_names	csnm	Zy	List of character set names
clear_all_tabs	tbc	ct	Clear all tab stops
clear_margins	mgc	MC	Clear all margins (top, bottom,
			and sides)
clear_screen	clear	cl	Clear screen and home cursor
clr_bol	el1	cb	Clear to beginning of line, inclusive
clr_eol	el	ce	Clear to end of line
clr_eos	ed	cd	Clear to end of display
code_set_init	csin	ci	Init sequence for multiple codesets
color_names	colornm	Yw	Give name for color #1
column_address	hpa	ch	Horizontal position absolute
command_character	cmdch	CC	Terminal settable cmd character
			in prototype
create_window	cwin	CW	Define win #1 to go from #2,#3 to
			#4,#5
cursor_address	cup	cm	Move to row #1 col #2
cursor_down	cud1	do	Down one line
cursor_home	home	ho	Home cursor (if no cup)
cursor_invisible	civis	vi	Make cursor invisible
cursor_left	cub1	le	Move left one space.
cursor_mem_address	mrcup	CM	Memory relative cursor addressing
cursor_normal	cnorm	ve	Make cursor appear normal
			(undo vs/vi)
cursor_right	cuf1	nd	Non-destructive space (cursor or
			carriage right)
cursor_to_ll	ll	ll	Last line, first column (if no cup)
cursor_up	cuu1	up	Upline (cursor up)
cursor_visible	cvvis	vs	Make cursor very visible
define_bit_image_region	defbi	Yx	Define rectangular bit-image region
			(use tparm)
define_char	defc	ZE	Define a character in a character set*
delete_character	dch1	dc	Delete character
delete_line	dl1	dl	Delete line
device_type	devt	dv	Indicate language/codeset support
dial_phone	dial	DI	Dial phone number #1
dis_status_line	dsl	ds	Disable status line
display_clock	dclk	DK	Display time-of-day clock
display_pc_char	dispc	S1	Display PC character
down_half_line	hd	hd	Half-line down (forward 1/2 linefeed)
ena_acs	enacs	eA	Enable alternate character set
end_bit_image_region	endbi	Yy	End a bit-image region (use tparm)
enter_alt_charset_mode	smacs	as	Start alternate character set
enter_am_mode	smam	SA	Turn on automatic margins
enter_blink_mode	blink	mb	Turn on blinking
enter_bold_mode	bold	md	Turn on bold (extra bright) mode
enter_ca_mode	smcup	ti	String to begin programs that use cup
enter_delete_mode	smdc	dm	Delete mode (enter)
enter_dim_mode	dim	mh	Turn on half-bright mode
enter_doublewide_mode	swidm	ZF	Enable double wide printing
enter_draft_quality	sdrfq	ZG	Set draft quality print
			mode
enter_insert_mode	smir	im	Insert mode (enter)
enter_italics_mode	sitm	ZH	Enable italics
enter_leftward_mode	slm	ZI	Enable leftward carriage motion
enter_micro_mode	smicm	ZJ	Enable micro motion capabilities
enter_near_letter_quality	snlq	ZK	Set near-letter quality print
enter_normal_quality	snrmq	ZL	Set normal quality print
enter_pc_charset_mode	smpch	S2	Enter PC character display mode
enter_protected_mode	prot	mp	Turn on protected mode
enter_reverse_mode	rev	mr	Turn on reverse video mode
enter_scancode_mode	smsc	S4	Enter PC scancode mode
enter_secure_mode	invis	mk	Turn on blank mode
			(characters invisible)
enter_shadow_mode	sshm	ZM	Enable shadow printing
enter_standout_mode	smso	so	Begin standout mode
enter_subscript_mode	ssubm	ZN	Enable subscript printing
enter_superscript_mode	ssupm	ZO	Enable superscript printing
enter_underline_mode	smul	us	Start underscore mode
enter_upward_mode	sum	ZP	Enable upward carriage motion
			mode
enter_xon_mode	smxon	SX	Turn on xon/xoff handshaking
erase_chars	ech	ec	Erase #1 characters
exit_alt_charset_mode	rmacs	ae	End alternate character set
exit_am_mode	rmam	RA	Turn off automatic margins
exit_attribute_mode	sgr0	me	Turn off all attributes
exit_ca_mode	rmcup	te	String to end programs that use cup
exit_delete_mode	rmdc	ed	End delete mode
exit_doublewide_mode	rwidm	ZQ	Disable double wide printing
exit_insert_mode	rmir	ei	End insert mode
exit_italics_mode	ritm	ZR	Disable italics
exit_leftward_mode	rlm	ZS	Enable rightward (normal)
			carriage motion
exit_micro_mode	rmicm	ZT	Disable micro motion capabilities
exit_pc_charset_mode	rmpch	S3	Disable PC character display mode
exit_scancode_mode	rmsc	S5	Disable PC scancode mode
exit_shadow_mode	rshm	ZU	Disable shadow printing
exit_standout_mode	rmso	se	End standout mode
exit_subscript_mode	rsubm	ZV	Disable subscript printing
exit_superscript_mode	rsupm	ZW	Disable superscript printing
exit_underline_mode	rmul	ue	End underscore mode
exit_upward_mode	rum	ZX	Enable downward (normal)
			carriage motion
exit_xon_mode	rmxon	RX	Turn off xon/xoff handshaking
fixed_pause	pause	PA	Pause for 2-3 seconds
flash_hook	hook	fh	Flash the switch hook
flash_screen	flash	vb	Visible bell (may not move cursor)
form_feed	ff	ff	Hardcopy terminal page eject
from_status_line	fsl	fs	Return from status line
get_mouse	getm	Gm	Curses should get button events
goto_window	wingo	WG	Go to window #1
hangup	hup	HU	Hang-up phone
init_1string	is1	i1	Terminal or printer initialization string
init_2string	is2	is	Terminal or printer initialization string
init_3string	is3	i3	Terminal or printer initialization string
init_file	if	if	Name of initialization file
init_prog	iprog	iP	Path name of program for initialization
initialize_color	initc	Ic	Initialize the definition of color
initialize_pair	initp	Ip	Initialize color-pair
insert_character	ich1	ic	Insert character
insert_line	il1	al	Add new blank line
insert_padding	ip	ip	Insert pad after character inserted

The ``key_'' strings are sent by specific keys. The ``key_'' descriptions include the macro, defined in <curses.h>, for the code returned by the curses routine getch when the key is pressed (see curs_getch(3CURSES)).

Table 4 key_ Strings

Variable	Name	Code	Description
key_a1	ka1	K1	KEY_A1, upper left of keypad
key_a3	ka3	K3	KEY_A3, upper right of keypad
key_b2	kb2	K2	KEY_B2, center of keypad
key_backspace	kbs	kb	KEY_BACKSPACE, sent by backspace
			key
key_beg	kbeg	@1	KEY_BEG, sent by beg(inning) key
key_btab	kcbt	kB	KEY_BTAB, sent by back-tab key
key_c1	kc1	K4	KEY_C1, lower left of keypad
key_c3	kc3	K5	KEY_C3, lower right of keypad
key_cancel	kcan	@2	KEY_CANCEL, sent by cancel key
key_catab	ktbc	ka	KEY_CATAB, sent by clear-all-tabs key
key_clear	kclr	kC	KEY_CLEAR, sent by clear-screen or
			erase key
key_close	kclo	@3	KEY_CLOSE, sent by close key
key_command	kcmd	@4	KEY_COMMAND, sent by cmd
			(command) key
key_copy	kcpy	@5	KEY_COPY, sent by copy key
key_create	kcrt	@6	KEY_CREATE, sent by create key
key_ctab	kctab	kt	KEY_CTAB, sent by clear-tab key
key_dc	kdch1	kD	KEY_DC, sent by delete-character key
key_dl	kdl1	kL	KEY_DL, sent by delete-line key
key_down	kcud1	kd	KEY_DOWN, sent by terminal
			down-arrow key
key_eic	krmir	kM	KEY_EIC, sent by rmir or smir in
			insert mode
key_end	kend	@7	KEY_END, sent by end key
key_enter	kent	@8	KEY_ENTER, sent by enter/send key
key_eol	kel	kE	KEY_EOL, sent by clear-to-end-of-line
			key
key_eos	ked	kS	KEY_EOS, sent by clear-to-end-of-screen
			key
key_exit	kext	@9	KEY_EXIT, sent by exit key
key_f0	kf0	k0	KEY_F(0), sent by function key f0
key_f1	kf1	k1	KEY_F(1), sent by function key f1
key_f2	kf2	k2	KEY_F(2), sent by function key f2
key_f3	kf3	k3	KEY_F(3), sent by function key f3
key_fB	kf4	k4	KEY_F(4), sent by function key fB
key_f5	kf5	k5	KEY_F(5), sent by function key f5
key_f6	kf6	k6	KEY_F(6), sent by function key f6
key_f7	kf7	k7	KEY_F(7), sent by function key f7
key_f8	kf8	k8	KEY_F(8), sent by function key f8
key_f9	kf9	k9	KEY_F(9), sent by function key f9
key_f10	kf10	k;	KEY_F(10), sent by function key f10
key_f11	kf11	F1	KEY_F(11), sent by function key f11
key_f12	kf12	F2	KEY_F(12), sent by function key f12
key_f13	kf13	F3	KEY_F(13), sent by function key f13
key_f14	kf14	F4	KEY_F(14), sent by function key f14
key_f15	kf15	F5	KEY_F(15), sent by function key f15
key_f16	kf16	F6	KEY_F(16), sent by function key f16
key_f17	kf17	F7	KEY_F(17), sent by function key f17
key_f18	kf18	F8	KEY_F(18), sent by function key f18
key_f19	kf19	F9	KEY_F(19), sent by function key f19
key_f20	kf20	FA	KEY_F(20), sent by function key f20
key_f21	kf21	FB	KEY_F(21), sent by function key f21
key_f22	kf22	FC	KEY_F(22), sent by function key f22
key_f23	kf23	FD	KEY_F(23), sent by function key f23
key_f24	kf24	FE	KEY_F(24), sent by function key f24
key_f25	kf25	FF	KEY_F(25), sent by function key f25
key_f26	kf26	FG	KEY_F(26), sent by function key f26
key_f27	kf27	FH	KEY_F(27), sent by function key f27
key_f28	kf28	FI	KEY_F(28), sent by function key f28
key_f29	kf29	FJ	KEY_F(29), sent by function key f29
key_f30	kf30	FK	KEY_F(30), sent by function key f30
key_f31	kf31	FL	KEY_F(31), sent by function key f31
key_f32	kf32	FM	KEY_F(32), sent by function key f32
key_f33	kf33	FN	KEY_F(13), sent by function key f13
key_f34	kf34	FO	KEY_F(34), sent by function key f34
key_f35	kf35	FP	KEY_F(35), sent by function key f35
key_f36	kf36	FQ	KEY_F(36), sent by function key f36
key_f37	kf37	FR	KEY_F(37), sent by function key f37
key_f38	kf38	FS	KEY_F(38), sent by function key f38
key_f39	kf39	FT	KEY_F(39), sent by function key f39
key_fB0	kf40	FU	KEY_F(40), sent by function key fB0
key_fB1	kf41	FV	KEY_F(41), sent by function key fB1
key_fB2	kf42	FW	KEY_F(42), sent by function key fB2
key_fB3	kf43	FX	KEY_F(43), sent by function key fB3
key_fB4	kf44	FY	KEY_F(44), sent by function key fB4
key_fB5	kf45	FZ	KEY_F(45), sent by function key fB5
key_fB6	kf46	Fa	KEY_F(46), sent by function key fB6
key_fB7	kf47	Fb	KEY_F(47), sent by function key fB7
key_fB8	kf48	Fc	KEY_F(48), sent by function key fB8
key_fB9	kf49	Fd	KEY_F(49), sent by function key fB9
key_f50	kf50	Fe	KEY_F(50), sent by function key f50
key_f51	kf51	Ff	KEY_F(51), sent by function key f51
key_f52	kf52	Fg	KEY_F(52), sent by function key f52
key_f53	kf53	Fh	KEY_F(53), sent by function key f53
key_f54	kf54	Fi	KEY_F(54), sent by function key f54
key_f55	kf55	Fj	KEY_F(55), sent by function key f55
key_f56	kf56	Fk	KEY_F(56), sent by function key f56
key_f57	kf57	Fl	KEY_F(57), sent by function key f57
key_f58	kf58	Fm	KEY_F(58), sent by function key f58
key_f59	kf59	Fn	KEY_F(59), sent by function key f59
key_f60	kf60	Fo	KEY_F(60), sent by function key f60
key_f61	kf61	Fp	KEY_F(61), sent by function key f61
key_f62	kf62	Fq	KEY_F(62), sent by function key f62
key_f63	kf63	Fr	KEY_F(63), sent by function key f63
key_find	kfnd	@0	KEY_FIND, sent by find key
key_help	khlp	%1	KEY_HELP, sent by help key
key_home	khome	kh	KEY_HOME, sent by home key
key_ic	kich1	kI	KEY_IC, sent by ins-char/enter
			ins-mode key
key_il	kil1	kA	KEY_IL, sent by insert-line key
key_left	kcub1	kl	KEY_LEFT, sent by terminal left-arrow
			key
key_ll	kll	kH	KEY_LL, sent by home-down key
key_mark	kmrk	%2	KEY_MARK, sent by mark key
key_message	kmsg	%3	KEY_MESSAGE, sent by message key
key_mouse	kmous	Km	0631, Mouse event has occured
key_move	kmov	%4	KEY_MOVE, sent by move key
key_next	knxt	%5	KEY_NEXT, sent by next-object key
key_npage	knp	kN	KEY_NPAGE, sent by next-page key
key_open	kopn	%6	KEY_OPEN, sent by open key
key_options	kopt	%7	KEY_OPTIONS, sent by options key
key_ppage	kpp	kP	KEY_PPAGE, sent by previous-page key
key_previous	kprv	%8	KEY_PREVIOUS, sent by previous-object
			key
key_print	kprt	%9	KEY_PRINT, sent by print or copy key
key_redo	krdo	%0	KEY_REDO, sent by redo key
key_reference	kref	&1	KEY_REFERENCE, sent by reference key
key_refresh	krfr	&2	KEY_REFRESH, sent by refresh key
key_replace	krpl	&3	KEY_REPLACE, sent by replace key
key_restart	krst	&4	KEY_RESTART, sent by restart key
key_resume	kres	&5	KEY_RESUME, sent by resume key
key_right	kcuf1	kr	KEY_RIGHT, sent by terminal
			right-arrow key
key_save	ksav	&6	KEY_SAVE, sent by save key
key_sbeg	kBEG	&9	KEY_SBEG, sent by shifted beginning key
key_scancel	kCAN	&0	KEY_SCANCEL, sent by shifted
			cancel key
key_scommand	kCMD	*1	KEY_SCOMMAND, sent by shifted
			command key
key_scopy	kCPY	*2	KEY_SCOPY, sent by shifted copy key
key_screate	kCRT	*3	KEY_SCREATE, sent by shifted
			create key
key_sdc	kDC	*4	KEY_SDC, sent by shifted delete-char
			key
key_sdl	kDL	*5	KEY_SDL, sent by shifted delete-line
			key
key_select	kslt	*6	KEY_SELECT, sent by select key
key_send	kEND	*7	KEY_SEND, sent by shifted end key
key_seol	kEOL	*8	KEY_SEOL, sent by shifted clear-line key
key_sexit	kEXT	*9	KEY_SEXIT, sent by shifted exit key
key_sf	kind	kF	KEY_SF, sent by scroll-forward/down
			key
key_sfind	kFND	*0	KEY_SFIND, sent by shifted find key
key_shelp	kHLP	#1	KEY_SHELP, sent by shifted help key
key_shome	kHOM	#2	KEY_SHOME, sent by shifted home key
key_sic	kIC	#3	KEY_SIC, sent by shifted input key
key_sleft	kLFT	#4	KEY_SLEFT, sent by shifted left-arrow
			key
key_smessage	kMSG	%a	KEY_SMESSAGE, sent by shifted
			message key
key_smove	kMOV	%b	KEY_SMOVE, sent by shifted move key
key_snext	kNXT	%c	KEY_SNEXT, sent by shifted next key
key_soptions	kOPT	%d	KEY_SOPTIONS, sent by shifted
			options key
key_sprevious	kPRV	%e	KEY_SPREVIOUS, sent by shifted prev
			key
key_sprint	kPRT	%f	KEY_SPRINT, sent by shifted print key
key_sr	kri	kR	KEY_SR, sent by scroll-backward/up
			key
key_sredo	kRDO	%g	KEY_SREDO, sent by shifted redo key
key_sreplace	kRPL	%h	KEY_SREPLACE, sent by shifted replace
			key
key_sright	kRIT	%i	KEY_SRIGHT, sent by shifted
			right-arrow key
key_srsume	kRES	%j	KEY_SRSUME, sent by shifted resume
			key
key_ssave	kSAV	!1	KEY_SSAVE, sent by shifted save key
key_ssuspend	kSPD	!2	KEY_SSUSPEND, sent by shifted
			suspend key
key_stab	khts	kT	KEY_STAB, sent by set-tab key
key_sundo	kUND	!3	KEY_SUNDO, sent by shifted undo key
key_suspend	kspd	&7	KEY_SUSPEND, sent by
			suspend key
key_undo	kund	&8	KEY_UNDO, sent by undo key
key_up	kcuu1	ku	KEY_UP, sent by terminal up-arrow key
keypad_local	rmkx	ke	Out of ``keypad-transmit'' mode
keypad_xmit	smkx	ks	Put terminal in ``keypad-transmit'' mode
lab_f0	lf0	l0	Labels on function key f0 if not f0
lab_f1	lf1	l1	Labels on function key f1 if not f1
lab_f2	lf2	l2	Labels on function key f2 if not f2
lab_f3	lf3	l3	Labels on function key f3 if not f3
lab_fB	lfB	l4	Labels on function key fB if not fB
lab_f5	lf5	l5	Labels on function key f5 if not f5
lab_f6	lf6	l6	Labels on function key f6 if not f6
lab_f7	lf7	l7	Labels on function key f7 if not f7
lab_f8	lf8	l8	Labels on function key f8 if not f8
lab_f9	lf9	l9	Labels on function key f9 if not f9
lab_f10	lf10	la	Labels on function key f10 if not f10
label_format	fln	Lf	Label format
label_off	rmln	LF	Turn off soft labels
label_on	smln	LO	Turn on soft labels
meta_off	rmm	mo	Turn off "meta mode"
meta_on	smm	mm	Turn on "meta mode" (8th bit)
micro_column_address	mhpa	ZY	Like column_address for micro
			adjustment
micro_down	mcud1	ZZ	Like cursor_down for micro adjustment
micro_left	mcub1	Za	Like cursor_left for micro adjustment
micro_right	mcuf1	Zb	Like cursor_right for micro
			adjustment
micro_row_address	mvpa	Zc	Like row_address for micro adjustment
micro_up	mcuu1	Zd	Like cursor_up for micro adjustment
mouse_info	minfo	Mi	Mouse status information
newline	nel	nw	Newline (behaves like cr followed
			by lf)
order_of_pins	porder	Ze	Matches software bits to print-head pins
orig_colors	oc	oc	Set all color(-pair)s to the original ones
orig_pair	op	op	Set default color-pair to the original one
pad_char	pad	pc	Pad character (rather than null)
parm_dch	dch	DC	Delete #1 chars
parm_delete_line	dl	DL	Delete #1 lines
parm_down_cursor	cud	DO	Move down #1 lines.
parm_down_micro	mcud	Zf	Like parm_down_cursor for micro
			adjust.
parm_ich	ich	IC	Insert #1 blank chars
parm_index	indn	SF	Scroll forward #1 lines.
parm_insert_line	il	AL	Add #1 new blank lines
parm_left_cursor	cub	LE	Move cursor left #1 spaces
parm_left_micro	mcub	Zg	Like parm_left_cursor for micro
			adjust.
parm_right_cursor	cuf	RI	Move right #1 spaces.
parm_right_micro	mcuf	Zh	Like parm_right_cursor for micro
			adjust.
parm_rindex	rin	SR	Scroll backward #1 lines.
parm_up_cursor	cuu	UP	Move cursor up #1 lines.
parm_up_micro	mcuu	Zi	Like parm_up_cursor for micro adjust.
pc_term_options	pctrm	S6	PC terminal options
pkey_key	pfkey	pk	Prog funct key #1 to type string #2
pkey_local	pfloc	pl	Prog funct key #1 to execute string #2
pkey_plab	pfxl	xl	Prog key #1 to xmit string #2 and show
			string #3
pkey_xmit	pfx	px	Prog funct key #1 to xmit string #2
plab_norm	pln	pn	Prog label #1 to show string #2
print_screen	mc0	ps	Print contents of the screen
prtr_non	mc5p	pO	Turn on the printer for #1 bytes
prtr_off	mc4	pf	Turn off the printer
prtr_on	mc5	po	Turn on the printer
pulse	pulse	PU	Select pulse dialing
quick_dial	qdial	QD	Dial phone number #1, without
			progress detection
remove_clock	rmclk	RC	Remove time-of-day clock
repeat_char	rep	rp	Repeat char #1 #2 times
req_for_input	rfi	RF	Send next input char (for ptys)
req_mouse_pos	reqmp	RQ	Request mouse position report
reset_1string	rs1	r1	Reset terminal completely to sane modes
reset_2string	rs2	r2	Reset terminal completely to sane modes
reset_3string	rs3	r3	Reset terminal completely to sane modes
reset_file	rf	rf	Name of file containing reset string
restore_cursor	rc	rc	Restore cursor to position of last sc
row_address	vpa	cv	Vertical position absolute
save_cursor	sc	sc	Save cursor position
scancode_escape	scesc	S7	Escape for scancode emulation
scroll_forward	ind	sf	Scroll text up
scroll_reverse	ri	sr	Scroll text down
select_char_set	scs	Zj	Select character set
set0_des_seq	s0ds	s0	Shift into codeset 0 (EUC set 0, ASCII)
set1_des_seq	s1ds	s1	Shift into codeset 1
set2_des_seq	s2ds	s2	Shift into codeset 2
set3_des_seq	s3ds	s3	Shift into codeset 3
			attributes #1-#6
set_a_background	setab	AB	Set background color using ANSI escape
set_a_foreground	setaf	AF	Set foreground color using ANSI escape
set_attributes	sgr	sa	Define the video attributes #1-#9
set_background	setb	Sb	Set current background color
set_bottom_margin	smgb	Zk	Set bottom margin at current line
set_bottom_margin_parm	smgbp	Zl	Set bottom margin at line #1 or #2
			lines from bottom
set_clock	sclk	SC	Set time-of-day clock
set_color_band	setcolor	Yz	Change to ribbon color #1
set_color_pair	scp	sp	Set current color-pair
set_foreground	setf	Sf	Set current foreground color1
set_left_margin	smgl	ML	Set left margin at current line
set_left_margin_parm	smglp	Zm	Set left (right) margin at column #1 (#2)
set_lr_margin	smglr	ML	Sets both left and right margins
set_page_length	slines	YZ	Set page length to #1 lines (use tparm)
			of an inch
set_right_margin	smgr	MR	Set right margin at current column
set_right_margin_parm	smgrp	Zn	Set right margin at column #1
set_tab	hts	st	Set a tab in all rows, current column
set_tb_margin	smgtb	MT	Sets both top and bottom margins
set_top_margin	smgt	Zo	Set top margin at current line
set_top_margin_parm	smgtp	Zp	Set top (bottom) margin at line #1 (#2)
set_window	wind	wi	Current window is lines #1-#2 cols #3-#4
start_bit_image	sbim	Zq	Start printing bit image graphics
start_char_set_def	scsd	Zr	Start definition of a character set
stop_bit_image	rbim	Zs	End printing bit image graphics
stop_char_set_def	rcsd	Zt	End definition of a character set
subscript_characters	subcs	Zu	List of ``subscript-able'' characters
superscript_characters	supcs	Zv	List of ``superscript-able'' characters
tab	ht	ta	Tab to next 8-space hardware tab stop
these_cause_cr	docr	Zw	Printing any of these chars causes cr
to_status_line	tsl	ts	Go to status line, col #1
tone	tone	TO	Select touch tone dialing
user0	u0	u0	User string 0
user1	u1	u1	User string 1
user2	u2	u2	User string 2
user3	u3	u3	User string 3
user4	u4	u4	User string 4
user5	u5	u5	User string 5
user6	u6	u6	User string 6
user7	u7	u7	User string 7
user8	u8	u8	User string 8
user9	u9	u9	User string 9
underline_char	uc	uc	Underscore one char and move past it
up_half_line	hu	hu	Half-line up (reverse 1/2 linefeed)
wait_tone	wait	WA	Wait for dial tone
xoff_character	xoffc	XF	X-off character
xon_character	xonc	XN	X-on character
zero_motion	zerom	Zx	No motion for the subsequent character

Sample Entry

The following entry, which describes the AT&T 610 terminal, is among the more complex entries in the terminfo file as of this writing.

610|610bct|ATT610|att610|AT&T610;80column;98key keyboard
   am, eslok, hs, mir, msgr, xenl, xon,
   cols#80, it#8, lh#2, lines#24, lw#8, nlab#8, wsl#80,
   acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
   bel=‸G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
   civis=\E[?25l, clear=\E[H\E[J, cnorm=\E[?25h\E[?12l,
   cr=\r, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\b,
   cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
   cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
   cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
   dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
   flash=\E[?5h$<200>\E[?5l, fsl=\E8, home=\E[H, ht=\t,
   ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED, .ind=\ED$<9>,
   invis=\E[8m,
   is1=\E[8;0 | \E[?3;4;5;13;15l\E[13;20l\E[?7h\E[12h\E(B\E)0,
   is2=\E[0m‸O, is3=\E(B\E)0, kLFT=\E[\s@, kRIT=\E[\sA,
   kbs=‸H, kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B,
   kcuf1=\E[C, kcuu1=\E[A, kf1=\EOc, kf10=\ENp,
   kf11=\ENq, kf12=\ENr, kf13=\ENs, kf14=\ENt, kf2=\EOd,
   kf3=\EOe, kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi,
   kf8=\EOj, kf9=\ENo, khome=\E[H, kind=\E[S, kri=\E[T,
   ll=\E[24H, mc4=\E[?4i, mc5=\E[?5i, nel=\EE,
   pfxl=\E[%p1%d;%p2%l%02dq%?%p1%{9}%<%t\s\s\sF%p1%1d\s\s\s\s\s
\s\s\s\s\s\s%;%p2%s,
   pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8, rev=\E[7m,
   ri=\EM, rmacs=‸O, rmir=\E[4l, rmln=\E[2p, rmso=\E[m,
   rmul=\E[m, rs2=\Ec\E[?3l, sc=\E7,
   sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;
%?%p3%p1% | %t;7%;%?%p7%t;8%;m%?%p9%t‸N%e‸O%;,
   sgr0=\E[m‸O, smacs=‸N, smir=\E[4h, smln=\E[p,
   smso=\E[7m, smul=\E[4m, tsl=\E7\E[25;%i%p1%dx,

Types of Capabilities in the Sample Entry

The sample entry shows the formats for the three types of terminfo capabilities listed: Boolean, numeric, and string. All capabilities specified in the terminfo source file must be followed by commas, including the last capability in the source file. In terminfo source files, capabilities are referenced by their capability names (as shown in the previous tables).

Boolean capabilities are specified simply by their comma separated cap names.

Numeric capabilities are followed by the character `#' and then a positive integer value. Thus, in the sample, cols (which shows the number of columns available on a device) is assigned the value 80 for the AT&T 610. (Values for numeric capabilities may be specified in decimal, octal, or hexadecimal, using normal C programming language conventions.)

Finally, string-valued capabilities such as el (clear to end of line sequence) are listed by a two- to five-character capname, an `=', and a string ended by the next occurrence of a comma. A delay in milliseconds may appear anywhere in such a capability, preceded by $ and enclosed in angle brackets, as in el=\EK$<3>. Padding characters are supplied by tput. The delay can be any of the following: a number, a number followed by an asterisk, such as 5*, a number followed by a slash, such as 5/, or a number followed by both, such as 5*/. A `*' shows that the padding required is proportional to the number of lines affected by the operation, and the amount given is the per-affected-unit padding required. (In the case of insert characters, the factor is still the number of lines affected. This is always 1 unless the device has in and the software uses it.) When a `*' is specified, it is sometimes useful to give a delay of the form 3.5 to specify a delay per unit to tenths of milliseconds. (Only one decimal place is allowed.)

A `/' indicates that the padding is mandatory. If a device has xon defined, the padding information is advisory and will only be used for cost estimates or when the device is in raw mode. Mandatory padding will be transmitted regardless of the setting of xon. If padding (whether advisory or mandatory) is specified for bel or flash, however, it will always be used, regardless of whether xon is specified.

terminfo offers notation for encoding special characters. Both \E and \e map to an ESCAPE character, ‸x maps to a control x for any appropriate x, and the sequences \n, \l, \r, \t, \b, \f, and \s give a newline, linefeed, return, tab, backspace, formfeed, and space, respectively. Other escapes include: \‸ for caret (‸); \\ for backslash (\); \, for comma (,); \: for colon (:); and \0 for null. (\0 will actually produce \200, which does not terminate a string but behaves as a null character on most devices, providing CS7 is specified. (See stty(1)). Finally, characters may be given as three octal digits after a backslash (for example, \123).

Sometimes individual capabilities must be commented out. To do this, put a period before the capability name. For example, see the second ind in the example above. Note that capabilities are defined in a left-to-right order and, therefore, a prior definition will override a later definition.

Preparing Descriptions

The most effective way to prepare a device description is by imitating the description of a similar device in terminfo and building up a description gradually, using partial descriptions with vi to check that they are correct. Be aware that a very unusual device may expose deficiencies in the ability of the terminfo file to describe it or the inability of vi to work with that device. To test a new device description, set the environment variable TERMINFO to the pathname of a directory containing the compiled description you are working on and programs will look there rather than in /usr/share/lib/terminfo. To get the padding for insert-line correct (if the device manufacturer did not document it) a severe test is to comment out xon, edit a large file at 9600 baud with vi, delete 16 or so lines from the middle of the screen, and then press the u key several times quickly. If the display is corrupted, more padding is usually needed. A similar test can be used for insert-character.

Section 1-1: Basic Capabilities

The number of columns on each line for the device is given by the cols numeric capability. If the device has a screen, then the number of lines on the screen is given by the lines capability. If the device wraps around to the beginning of the next line when it reaches the right margin, then it should have the am capability. If the terminal can clear its screen, leaving the cursor in the home position, then this is given by the clear string capability. If the terminal overstrikes (rather than clearing a position when a character is struck over) then it should have the os capability. If the device is a printing terminal, with no soft copy unit, specify both hc and os. If there is a way to move the cursor to the left edge of the current row, specify this as cr. (Normally this will be carriage return, control M.) If there is a way to produce an audible signal (such as a bell or a beep), specify it as bel. If, like most devices, the device uses the xon-xoff flow-control protocol, specify xon.

If there is a way to move the cursor one position to the left (such as backspace), that capability should be given as cub1. Similarly, sequences to move to the right, up, and down should be given as cuf1, cuu1, and cud1, respectively. These local cursor motions must not alter the text they pass over; for example, you would not normally use ``cuf1=\s'' because the space would erase the character moved over.

A very important point here is that the local cursor motions encoded in terminfo are undefined at the left and top edges of a screen terminal. Programs should never attempt to backspace around the left edge, unless bw is specified, and should never attempt to go up locally off the top. To scroll text up, a program goes to the bottom left corner of the screen and sends the ind (index) string.

To scroll text down, a program goes to the top left corner of the screen and sends the ri (reverse index) string. The strings ind and ri are undefined when not on their respective corners of the screen.

Parameterized versions of the scrolling sequences are indn and rin. These versions have the same semantics as ind and ri, except that they take one parameter and scroll the number of lines specified by that parameter. They are also undefined except at the appropriate edge of the screen.

The am capability tells whether the cursor sticks at the right edge of the screen when text is output, but this does not necessarily apply to a cuf1 from the last column. Backward motion from the left edge of the screen is possible only when bw is specified. In this case, cub1 will move to the right edge of the previous row. If bw is not given, the effect is undefined. This is useful for drawing a box around the edge of the screen, for example. If the device has switch selectable automatic margins, am should be specified in the terminfo source file. In this case, initialization strings should turn on this option, if possible. If the device has a command that moves to the first column of the next line, that command can be given as nel (newline). It does not matter if the command clears the remainder of the current line, so if the device has no cr and lf it may still be possible to craft a working nel out of one or both of them.

These capabilities suffice to describe hardcopy and screen terminals. Thus the AT&T 5320 hardcopy terminal is described as follows:

5320|att5320|AT&T 5320 hardcopy terminal, am, hc, os, cols#132, bel=‸G, cr=\r, cub1=\b, cnd1=\n, dch1=\E[P, dl1=\E[M, ind=\n,

while the Lear Siegler ADM-3 is described as

adm3 | lsi adm3, am, bel=‸G, clear=‸Z, cols#80, cr=‸M, cub1=‸H, cud1=‸J, ind=‸J, lines#24,

Section 1-2: Parameterized Strings

Cursor addressing and other strings requiring parameters are described by a parameterized string capability, with printf-like escapes (%x) in it. For example, to address the cursor, the cup capability is given, using two parameters: the row and column to address to. (Rows and columns are numbered from zero and refer to the physical screen visible to the user, not to any unseen memory.) If the terminal has memory relative cursor addressing, that can be indicated by mrcup.

The parameter mechanism uses a stack and special % codes to manipulate the stack in the manner of Reverse Polish Notation (postfix). Typically a sequence will push one of the parameters onto the stack and then print it in some format. Often more complex operations are necessary. Operations are in postfix form with the operands in the usual order. That is, to subtract 5 from the first parameter, one would use %p1%{5}%-.

The % encodings have the following meanings:

%%

outputs `%'

%[[:]flags][width[.precision]][doxXs]

as in printf, flags are [-+#] and space

%c

print pop gives %c

%p[1-9]

push ith parm

%P[a-z]

set dynamic variable [a-z] to pop

%g[a-z]

get dynamic variable [a-z] and push it

%P[A-Z]

set static variable [a-z] to pop

%g[A-Z]

get static variable [a-z] and push it

%'c'

push char constant c

%{nn}

push decimal constant nn

%l

push strlen(pop)

%+ %- %* %/ %m

arithmetic (%m is mod): push(pop integer2 op pop integer1)

%& %| %‸

bit operations: push(pop integer2 op pop integer1)

%= %> %<

logical operations: push(pop integer2 op pop integer1)

%A %O

logical operations: and, or

%! %~

unary operations: push(op pop)

%i

(for ANSI terminals) add 1 to first parm, if one parm present, or first two parms, if more than one parm present

%? expr %t thenpart %e elsepart %;

if-then-else, %e elsepart is optional; else-if's are possible ala Algol 68: %? c₁ %t b₁ %e c₂ %t b₂ %e c₃ %t b₃ %e c₄ %t b₄ %e b₅%; c_i are conditions, b_i are bodies.

If the ``-'' flag is used with ``%[doxXs]'', then a colon (:) must be placed between the ``%'' and the ``-'' to differentiate the flag from the binary ``%-'' operator, for example ``%:-16.16s''.

Consider the Hewlett-Packard 2645, which, to get to row 3 and column 12, needs to be sent \E&a12c03Y padded for 6 milliseconds. Note that the order of the rows and columns is inverted here, and that the row and column are zero-padded as two digits. Thus its cup capability is: cup=\E&a%p2%2.2dc%p1%2.2dY$<6>

The Micro-Term ACT-IV needs the current row and column sent preceded by a ‸T, with the row and column simply encoded in binary, ``cup=‸T%p1%c%p2%c''. Devices that use ``%c'' need to be able to backspace the cursor (cub1), and to move the cursor up one line on the screen (cuu1). This is necessary because it is not always safe to transmit \n, ‸D, and \r, as the system may change or discard them. (The library routines dealing with terminfo set tty modes so that tabs are never expanded, so \t is safe to send. This turns out to be essential for the Ann Arbor 4080.)

A final example is the LSI ADM-3a, which uses row and column offset by a blank character, thus ``cup=\E=%p1%'\s'%+%c%p2%'\s'%+%c''. After sending ``\E='', this pushes the first parameter, pushes the ASCII value for a space (32), adds them (pushing the sum on the stack in place of the two previous values), and outputs that value as a character. Then the same is done for the second parameter. More complex arithmetic is possible using the stack.

Section 1-3: Cursor Motions

If the terminal has a fast way to home the cursor (to very upper left corner of screen) then this can be given as home; similarly a fast way of getting to the lower left-hand corner can be given as ll; this may involve going up with cuu1 from the home position, but a program should never do this itself (unless ll does) because it can make no assumption about the effect of moving up from the home position. Note that the home position is the same as addressing to (0,0): to the top left corner of the screen, not of memory. (Thus, the \EH sequence on Hewlett-Packard terminals cannot be used for home without losing some of the other features on the terminal.)

If the device has row or column absolute-cursor addressing, these can be given as single parameter capabilities hpa (horizontal position absolute) and vpa (vertical position absolute). Sometimes these are shorter than the more general two-parameter sequence (as with the Hewlett-Packard 2645) and can be used in preference to cup. If there are parameterized local motions (for example, move n spaces to the right) these can be given as cud, cub, cuf, and cuu with a single parameter indicating how many spaces to move. These are primarily useful if the device does not have cup, such as the Tektronix 4025.

If the device needs to be in a special mode when running a program that uses these capabilities, the codes to enter and exit this mode can be given as smcup and rmcup. This arises, for example, from terminals, such as the Concept, with more than one page of memory. If the device has only memory relative cursor addressing and not screen relative cursor addressing, a one screen-sized window must be fixed into the device for cursor addressing to work properly. This is also used for the Tektronix 4025, where smcup sets the command character to be the one used by terminfo. If the smcup sequence will not restore the screen after an rmcup sequence is output (to the state prior to outputting rmcup), specify nrrmc.

Section 1-4: Area Clears

If the terminal can clear from the current position to the end of the line, leaving the cursor where it is, this should be given as el. If the terminal can clear from the beginning of the line to the current position inclusive, leaving the cursor where it is, this should be given as el1. If the terminal can clear from the current position to the end of the display, then this should be given as ed. ed is only defined from the first column of a line. (Thus, it can be simulated by a request to delete a large number of lines, if a true ed is not available.)

Section 1-5: Insert/Delete Line

If the terminal can open a new blank line before the line where the cursor is, this should be given as il1; this is done only from the first position of a line. The cursor must then appear on the newly blank line. If the terminal can delete the line which the cursor is on, then this should be given as dl1; this is done only from the first position on the line to be deleted. Versions of il1 and dl1 which take a single parameter and insert or delete that many lines can be given as il and dl.

If the terminal has a settable destructive scrolling region (like the VT100) the command to set this can be described with the csr capability, which takes two parameters: the top and bottom lines of the scrolling region. The cursor position is, alas, undefined after using this command. It is possible to get the effect of insert or delete line using this command — the sc and rc (save and restore cursor) commands are also useful. Inserting lines at the top or bottom of the screen can also be done using ri or ind on many terminals without a true insert/delete line, and is often faster even on terminals with those features.

To determine whether a terminal has destructive scrolling regions or non-destructive scrolling regions, create a scrolling region in the middle of the screen, place data on the bottom line of the scrolling region, move the cursor to the top line of the scrolling region, and do a reverse index (ri) followed by a delete line (dl1) or index (ind). If the data that was originally on the bottom line of the scrolling region was restored into the scrolling region by the dl1 or ind, then the terminal has non-destructive scrolling regions. Otherwise, it has destructive scrolling regions. Do not specify csr if the terminal has non-destructive scrolling regions, unless ind, ri, indn, rin, dl, and dl1 all simulate destructive scrolling.

If the terminal has the ability to define a window as part of memory, which all commands affect, it should be given as the parameterized string wind. The four parameters are the starting and ending lines in memory and the starting and ending columns in memory, in that order.

If the terminal can retain display memory above, then the da capability should be given; if display memory can be retained below, then db should be given. These indicate that deleting a line or scrolling a full screen may bring non-blank lines up from below or that scrolling back with ri may bring down non-blank lines.

Section 1-6: Insert/Delete Character

There are two basic kinds of intelligent terminals with respect to insert/delete character operations which can be described using terminfo. The most common insert/delete character operations affect only the characters on the current line and shift characters off the end of the line rigidly. Other terminals, such as the Concept 100 and the Perkin Elmer Owl, make a distinction between typed and untyped blanks on the screen, shifting upon an insert or delete only to an untyped blank on the screen which is either eliminated, or expanded to two untyped blanks. You can determine the kind of terminal you have by clearing the screen and then typing text separated by cursor motions. Type ``abc def'' using local cursor motions (not spaces) between the abc and the def. Then position the cursor before the abc and put the terminal in insert mode. If typing characters causes the rest of the line to shift rigidly and characters to fall off the end, then your terminal does not distinguish between blanks and untyped positions. If the abc shifts over to the def which then move together around the end of the current line and onto the next as you insert, you have the second type of terminal, and should give the capability in, which stands for ``insert null.'' While these are two logically separate attributes (one line versus multiline insert mode, and special treatment of untyped spaces) we have seen no terminals whose insert mode cannot be described with the single attribute.

terminfo can describe both terminals that have an insert mode and terminals which send a simple sequence to open a blank position on the current line. Give as smir the sequence to get into insert mode. Give as rmir the sequence to leave insert mode. Now give as ich1 any sequence needed to be sent just before sending the character to be inserted. Most terminals with a true insert mode will not give ich1; terminals that send a sequence to open a screen position should give it here. (If your terminal has both, insert mode is usually preferable to ich1. Do not give both unless the terminal actually requires both to be used in combination.) If post-insert padding is needed, give this as a number of milliseconds padding in ip (a string option). Any other sequence which may need to be sent after an insert of a single character may also be given in ip. If your terminal needs both to be placed into an `insert mode' and a special code to precede each inserted character, then both smir/rmir and ich1 can be given, and both will be used. The ich capability, with one parameter, n, will insert n blanks.

If padding is necessary between characters typed while not in insert mode, give this as a number of milliseconds padding in rmp.

It is occasionally necessary to move around while in insert mode to delete characters on the same line (for example, if there is a tab after the insertion position). If your terminal allows motion while in insert mode you can give the capability mir to speed up inserting in this case. Omitting mir will affect only speed. Some terminals (notably Datamedia's) must not have mir because of the way their insert mode works.

Finally, you can specify dch1 to delete a single character, dch with one parameter, n, to delete n characters, and delete mode by giving smdc and rmdc to enter and exit delete mode (any mode the terminal needs to be placed in for dch1 to work).

A command to erase n characters (equivalent to outputting n blanks without moving the cursor) can be given as ech with one parameter.

Section 1-7: Highlighting, Underlining, and Visible Bells

Your device may have one or more kinds of display attributes that allow you to highlight selected characters when they appear on the screen. The following display modes (shown with the names by which they are set) may be available: a blinking screen (blink), bold or extra-bright characters (bold), dim or half-bright characters (dim), blanking or invisible text (invis), protected text (prot), a reverse-video screen (rev), and an alternate character set (smacs to enter this mode and rmacs to exit it). (If a command is necessary before you can enter alternate character set mode, give the sequence in enacs or "enable alternate-character-set" mode.) Turning on any of these modes singly may or may not turn off other modes.

sgr0 should be used to turn off all video enhancement capabilities. It should always be specified because it represents the only way to turn off some capabilities, such as dim or blink.

You should choose one display method as standout mode and use it to highlight error messages and other kinds of text to which you want to draw attention. Choose a form of display that provides strong contrast but that is easy on the eyes. (We recommend reverse-video plus half-bright or reverse-video alone.) The sequences to enter and exit standout mode are given as smso and rmso, respectively. If the code to change into or out of standout mode leaves one or even two blank spaces on the screen, as the TVI 912 and Teleray 1061 do, then xmc should be given to tell how many spaces are left.

Sequences to begin underlining and end underlining can be specified as smul and rmul , respectively. If the device has a sequence to underline the current character and to move the cursor one space to the right (such as the Micro-Term MIME), this sequence can be specified as uc.

Terminals with the ``magic cookie'' glitch (xmc) deposit special ``cookies'' when they receive mode-setting sequences, which affect the display algorithm rather than having extra bits for each character. Some terminals, such as the Hewlett-Packard 2621, automatically leave standout mode when they move to a new line or the cursor is addressed. Programs using standout mode should exit standout mode before moving the cursor or sending a newline, unless the msgr capability, asserting that it is safe to move in standout mode, is present.

If the terminal has a way of flashing the screen to indicate an error quietly (a bell replacement), then this can be given as flash; it must not move the cursor. A good flash can be done by changing the screen into reverse video, pad for 200 ms, then return the screen to normal video.

If the cursor needs to be made more visible than normal when it is not on the bottom line (to make, for example, a non-blinking underline into an easier to find block or blinking underline) give this sequence as cvvis. The boolean chts should also be given. If there is a way to make the cursor completely invisible, give that as civis. The capability cnorm should be given which undoes the effects of either of these modes.

If your terminal generates underlined characters by using the underline character (with no special sequences needed) even though it does not otherwise overstrike characters, then you should specify the capability ul. For devices on which a character overstriking another leaves both characters on the screen, specify the capability os. If overstrikes are erasable with a blank, then this should be indicated by specifying eo.

If there is a sequence to set arbitrary combinations of modes, this should be given as sgr (set attributes), taking nine parameters. Each parameter is either 0 or non-zero, as the corresponding attribute is on or off. The nine parameters are, in order: standout, underline, reverse, blink, dim, bold, blank, protect, alternate character set. Not all modes need to be supported by sgr; only those for which corresponding separate attribute commands exist should be supported. For example, let's assume that the terminal in question needs the following escape sequences to turn on various modes.

tparm
parameter	attribute	escape sequence
	none	\E[0m
p1	standout	\E[0;4;7m
p2	underline	\E[0;3m
p3	reverse	\E[0;4m
p4	blink	\E[0;5m
p5	dim	\E[0;7m
p6	bold	\E[0;3;4m
p7	invis	\E[0;8m
p8	protect	not available
p9	altcharset	‸O (off) ‸N (on)

Note that each escape sequence requires a 0 to turn off other modes before turning on its own mode. Also note that, as suggested above, standout is set up to be the combination of reverse and dim. Also, because this terminal has no bold mode, bold is set up as the combination of reverse and underline. In addition, to allow combinations, such as underline+blink, the sequence to use would be \E[0;3;5m. The terminal doesn't have protect mode, either, but that cannot be simulated in any way, so p8 is ignored. The altcharset mode is different in that it is either ‸O or ‸N, depending on whether it is off or on. If all modes were to be turned on, the sequence would be \E[0;3;4;5;7;8m‸N.

Now look at when different sequences are output. For example, ;3 is output when either p2 or p6 is true, that is, if either underline or bold modes are turned on. Writing out the above sequences, along with their dependencies, gives the following:

sequence	when to output	terminfo translation
\E[0	always	\E[0
;3	if p2 or p6	%?%p2%p6%|%t;3%;
;4	if p1 or p3 or p6	%?%p1%p3%|%p6%|%t;4%;
;5	if p4	%?%p4%t;5%;
;7	if p1 or p5	%?%p1%p5%|%t;7%;
;8	if p7	%?%p7%t;8%;
m	always	m
‸N or ‸O	if p9 ‸N, else ‸O	%?%p9%t‸N%e‸O%;

Putting this all together into the sgr sequence gives:

sgr=\E[0%?%p2%p6%|%t;3%;%?%p1%p3%|%p6% |%t;4%;%?%p5%t;5%;%?%p1%p5% |%t;7%;%?%p7%t;8%;m%?%p9%t‸N%e‸O%;,

Remember that sgr and sgr0 must always be specified.

Section 1-8: Keypad

If the device has a keypad that transmits sequences when the keys are pressed, this information can also be specified. Note that it is not possible to handle devices where the keypad only works in local (this applies, for example, to the unshifted Hewlett-Packard 2621 keys). If the keypad can be set to transmit or not transmit, specify these sequences as smkx and rmkx. Otherwise the keypad is assumed to always transmit.

The sequences sent by the left arrow, right arrow, up arrow, down arrow, and home keys can be given as kcub1, kcuf1, kcuu1, kcud1,and khome, respectively. If there are function keys such as f0, f1, ..., f63, the sequences they send can be specified as kf0, kf1, ..., kf63. If the first 11 keys have labels other than the default f0 through f10, the labels can be given as lf0, lf1, ..., lf10. The codes transmitted by certain other special keys can be given: kll (home down), kbs (backspace), ktbc (clear all tabs), kctab (clear the tab stop in this column), kclr (clear screen or erase key), kdch1 (delete character), kdl1 (delete line), krmir (exit insert mode), kel (clear to end of line), ked (clear to end of screen), kich1 (insert character or enter insert mode), kil1 (insert line), knp (next page), kpp (previous page), kind (scroll forward/down), kri (scroll backward/up), khts (set a tab stop in this column). In addition, if the keypad has a 3 by 3 array of keys including the four arrow keys, the other five keys can be given as ka1, ka3, kb2, kc1, and kc3. These keys are useful when the effects of a 3 by 3 directional pad are needed. Further keys are defined above in the capabilities list.

Strings to program function keys can be specified as pfkey, pfloc, and pfx. A string to program screen labels should be specified as pln. Each of these strings takes two parameters: a function key identifier and a string to program it with. pfkey causes pressing the given key to be the same as the user typing the given string; pfloc causes the string to be executed by the terminal in local mode; and pfx causes the string to be transmitted to the computer. The capabilities nlab, lw and lh define the number of programmable screen labels and their width and height. If there are commands to turn the labels on and off, give them in smln and rmln. smln is normally output after one or more pln sequences to make sure that the change becomes visible.

Section 1-9: Tabs and Initialization

If the device has hardware tabs, the command to advance to the next tab stop can be given as ht (usually control I). A ``backtab'' command that moves leftward to the next tab stop can be given as cbt. By convention, if tty modes show that tabs are being expanded by the computer rather than being sent to the device, programs should not use ht or cbt (even if they are present) because the user may not have the tab stops properly set. If the device has hardware tabs that are initially set every n spaces when the device is powered up, the numeric parameter it is given, showing the number of spaces the tabs are set to. This is normally used by tput init (see tput(1)) to determine whether to set the mode for hardware tab expansion and whether to set the tab stops. If the device has tab stops that can be saved in nonvolatile memory, the terminfo description can assume that they are properly set. If there are commands to set and clear tab stops, they can be given as tbc (clear all tab stops) and hts (set a tab stop in the current column of every row).

Other capabilities include: is1, is2, and is3, initialization strings for the device; iprog, the path name of a program to be run to initialize the device; and if, the name of a file containing long initialization strings. These strings are expected to set the device into modes consistent with the rest of the terminfo description. They must be sent to the device each time the user logs in and be output in the following order: run the program iprog; output is1; output is2; set the margins using mgc, smgl and smgr; set the tabs using tbc and hts; print the file if; and finally output is3. This is usually done using the init option of tput.

Most initialization is done with is2. Special device modes can be set up without duplicating strings by putting the common sequences in is2 and special cases in is1 and is3. Sequences that do a reset from a totally unknown state can be given as rs1, rs2, rf, and rs3, analogous to is1, is2, is3, and if. (The method using files, if and rf, is used for a few terminals, from /usr/share/lib/tabset/*; however, the recommended method is to use the initialization and reset strings.) These strings are output by tput reset, which is used when the terminal gets into a wedged state. Commands are normally placed in rs1, rs2, rs3, and rf only if they produce annoying effects on the screen and are not necessary when logging in. For example, the command to set a terminal into 80-column mode would normally be part of is2, but on some terminals it causes an annoying glitch on the screen and is not normally needed because the terminal is usually already in 80-column mode.

If a more complex sequence is needed to set the tabs than can be described by using tbc and hts, the sequence can be placed in is2 or if.

Any margin can be cleared with mgc. (For instructions on how to specify commands to set and clear margins, see "Margins" below under "PRINTER CAPABILITIES.")

Section 1-10: Delays

Certain capabilities control padding in the tty driver. These are primarily needed by hard-copy terminals, and are used by tput init to set tty modes appropriately. Delays embedded in the capabilities cr, ind, cub1, ff, and tab can be used to set the appropriate delay bits to be set in the tty driver. If pb (padding baud rate) is given, these values can be ignored at baud rates below the value of pb.

Section 1-11: Status Lines

If the terminal has an extra ``status line'' that is not normally used by software, this fact can be indicated. If the status line is viewed as an extra line below the bottom line, into which one can cursor address normally (such as the Heathkit h19's 25th line, or the 24th line of a VT100 which is set to a 23-line scrolling region), the capability hs should be given. Special strings that go to a given column of the status line and return from the status line can be given as tsl and fsl. (fsl must leave the cursor position in the same place it was before tsl. If necessary, the sc and rc strings can be included in tsl and fsl to get this effect.) The capability tsl takes one parameter, which is the column number of the status line the cursor is to be moved to.

If escape sequences and other special commands, such as tab, work while in the status line, the flag eslok can be given. A string which turns off the status line (or otherwise erases its contents) should be given as dsl. If the terminal has commands to save and restore the position of the cursor, give them as sc and rc. The status line is normally assumed to be the same width as the rest of the screen, for example, cols. If the status line is a different width (possibly because the terminal does not allow an entire line to be loaded) the width, in columns, can be indicated with the numeric parameter wsl.

Section 1-12: Line Graphics

If the device has a line drawing alternate character set, the mapping of glyph to character would be given in acsc. The definition of this string is based on the alternate character set used in the DEC VT100 terminal, extended slightly with some characters from the AT&T 4410v1 terminal.

Glyph Name	vt100+ Character
arrow pointing right	+
arrow pointing left	,
arrow pointing down	.
solid square block	0
lantern symbol	I
arrow pointing up	-
diamond	`
checker board (stipple)	a
degree symbol	f
plus/minus	g
board of squares	h
lower right corner	j
upper right corner	k
upper left corner	l
lower left corner	m
plus	n
scan line 1	o
horizontal line	q
scan line 9	s
left tee	t
right tee	u
bottom tee	v
top tee	w
vertical line	x
bullet	~

The best way to describe a new device's line graphics set is to add a third column to the above table with the characters for the new device that produce the appropriate glyph when the device is in the alternate character set mode. For example,

Glyph Name	vt100+ Char	New tty Char
upper left corner	l	R
lower left corner	m	F
upper right corner	k	T
lower right corner	j	G
horizontal line	q	,
vertical line	x	.

Now write down the characters left to right, as in ``acsc=lRmFkTjGq\,x.''.

In addition, terminfo allows you to define multiple character sets. See Section 2-5 for details.

Section 1-13: Color Manipulation

Let us define two methods of color manipulation: the Tektronix method and the HP method. The Tektronix method uses a set of N predefined colors (usually 8) from which a user can select "current" foreground and background colors. Thus a terminal can support up to N colors mixed into N*N color-pairs to be displayed on the screen at the same time. When using an HP method the user cannot define the foreground independently of the background, or vice-versa. Instead, the user must define an entire color-pair at once. Up to M color-pairs, made from 2*M different colors, can be defined this way. Most existing color terminals belong to one of these two classes of terminals.

The numeric variables colors and pairs define the number of colors and color-pairs that can be displayed on the screen at the same time. If a terminal can change the definition of a color (for example, the Tektronix 4100 and 4200 series terminals), this should be specified with ccc (can change color). To change the definition of a color (Tektronix 4200 method), use initc (initialize color). It requires four arguments: color number (ranging from 0 to colors-1) and three RGB (red, green, and blue) values or three HLS colors (Hue, Lightness, Saturation). Ranges of RGB and HLS values are terminal dependent.

Tektronix 4100 series terminals only use HLS color notation. For such terminals (or dual-mode terminals to be operated in HLS mode) one must define a boolean variable hls; that would instruct the curses init_color routine to convert its RGB arguments to HLS before sending them to the terminal. The last three arguments to the initc string would then be HLS values.

If a terminal can change the definitions of colors, but uses a color notation different from RGB and HLS, a mapping to either RGB or HLS must be developed.

To set current foreground or background to a given color, use setaf (set ANSI foreground) and setab (set ANSI background). They require one parameter: the number of the color. To initialize a color-pair (HP method), use initp (initialize pair). It requires seven parameters: the number of a color-pair (range=0 to pairs-1), and six RGB values: three for the foreground followed by three for the background. (Each of these groups of three should be in the order RGB.) When initc or initp are used, RGB or HLS arguments should be in the order "red, green, blue" or "hue, lightness, saturation"), respectively. To make a color-pair current, use scp (set color-pair). It takes one parameter, the number of a color-pair.

Some terminals (for example, most color terminal emulators for PCs) erase areas of the screen with current background color. In such cases, bce (background color erase) should be defined. The variable op (original pair) contains a sequence for setting the foreground and the background colors to what they were at the terminal start-up time. Similarly, oc (original colors) contains a control sequence for setting all colors (for the Tektronix method) or color-pairs (for the HP method) to the values they had at the terminal start-up time.

Some color terminals substitute color for video attributes. Such video attributes should not be combined with colors. Information about these video attributes should be packed into the ncv (no color video) variable. There is a one-to-one correspondence between the nine least significant bits of that variable and the video attributes. The following table depicts this correspondence.

Attribute	Bit Position	Decimal Value
A_STANDOUT	0	1
A_UNDERLINE	1	2
A_REVERSE	2	4
A_BLINK	3	8
A_DIM	4	16
A_BOLD	5	32
A_INVIS	6	64
A_PROTECT	7	128
A_ALTCHARSET	8	256

When a particular video attribute should not be used with colors, the corresponding ncv bit should be set to 1; otherwise it should be set to zero. To determine the information to pack into the ncv variable, you must add together the decimal values corresponding to those attributes that cannot coexist with colors. For example, if the terminal uses colors to simulate reverse video (bit number 2 and decimal value 4) and bold (bit number 5 and decimal value 32), the resulting value for ncv will be 36 (4 + 32).

Section 1-14: Miscellaneous

If the terminal requires other than a null (zero) character as a pad, then this can be given as pad. Only the first character of the pad string is used. If the terminal does not have a pad character, specify npc.

If the terminal can move up or down half a line, this can be indicated with hu (half-line up) and hd (half-line down). This is primarily useful for superscripts and subscripts on hardcopy terminals. If a hardcopy terminal can eject to the next page (form feed), give this as ff (usually control L).

If there is a command to repeat a given character a given number of times (to save time transmitting a large number of identical characters) this can be indicated with the parameterized string rep. The first parameter is the character to be repeated and the second is the number of times to repeat it. Thus, tparm(repeat_char, 'x', 10) is the same as xxxxxxxxxx.

If the terminal has a settable command character, such as the Tektronix 4025, this can be indicated with cmdch. A prototype command character is chosen which is used in all capabilities. This character is given in the cmdch capability to identify it. The following convention is supported on some systems: If the environment variable CC exists, all occurrences of the prototype character are replaced with the character in CC.

Terminal descriptions that do not represent a specific kind of known terminal, such as switch, dialup, patch, and network, should include the gn (generic) capability so that programs can complain that they do not know how to talk to the terminal. (This capability does not apply to virtual terminal descriptions for which the escape sequences are known.) If the terminal is one of those supported by the system virtual terminal protocol, the terminal number can be given as vt. A line-turn-around sequence to be transmitted before doing reads should be specified in rfi.

If the device uses xon/xoff handshaking for flow control, give xon. Padding information should still be included so that routines can make better decisions about costs, but actual pad characters will not be transmitted. Sequences to turn on and off xon/xoff handshaking may be given in smxon and rmxon. If the characters used for handshaking are not ‸S and ‸Q, they may be specified with xonc and xoffc.

If the terminal has a ``meta key'' which acts as a shift key, setting the 8th bit of any character transmitted, this fact can be indicated with km. Otherwise, software will assume that the 8th bit is parity and it will usually be cleared. If strings exist to turn this ``meta mode'' on and off, they can be given as smm and rmm.

If the terminal has more lines of memory than will fit on the screen at once, the number of lines of memory can be indicated with lm. A value of lm#0 indicates that the number of lines is not fixed, but that there is still more memory than fits on the screen.

Media copy strings which control an auxiliary printer connected to the terminal can be given as mc0: print the contents of the screen, mc4: turn off the printer, and mc5: turn on the printer. When the printer is on, all text sent to the terminal will be sent to the printer. A variation, mc5p, takes one parameter, and leaves the printer on for as many characters as the value of the parameter, then turns the printer off. The parameter should not exceed 255. If the text is not displayed on the terminal screen when the printer is on, specify mc5i (silent printer). All text, including mc4, is transparently passed to the printer while an mc5p is in effect.

Section 1-15: Special Cases

The working model used by terminfo fits most terminals reasonably well. However, some terminals do not completely match that model, requiring special support by terminfo. These are not meant to be construed as deficiencies in the terminals; they are just differences between the working model and the actual hardware. They may be unusual devices or, for some reason, do not have all the features of the terminfo model implemented.

Terminals that cannot display tilde (~) characters, such as certain Hazeltine terminals, should indicate hz.

Terminals that ignore a linefeed immediately after an am wrap, such as the Concept 100, should indicate xenl. Those terminals whose cursor remains on the right-most column until another character has been received, rather than wrapping immediately upon receiving the right-most character, such as the VT100, should also indicate xenl.

If el is required to get rid of standout (instead of writing normal text on top of it), xhp should be given.

Those Teleray terminals whose tabs turn all characters moved over to blanks, should indicate xt (destructive tabs). This capability is also taken to mean that it is not possible to position the cursor on top of a ``magic cookie.'' Therefore, to erase standout mode, it is necessary, instead, to use delete and insert line.

Those Beehive Superbee terminals which do not transmit the escape or control-C characters, should specify xsb, indicating that the f1 key is to be used for escape and the f2 key for control C.

Section 1-16: Similar Terminals

If there are two very similar terminals, one can be defined as being just like the other with certain exceptions. The string capability use can be given with the name of the similar terminal. The capabilities given before use override those in the terminal type invoked by use. A capability can be canceled by placing xx@ to the left of the capability definition, where xx is the capability. For example, the entry

att4424-2|Teletype4424 in display function group ii, rev@, sgr@, smul@, use=att4424,

defines an AT&T4424 terminal that does not have the rev, sgr, and smul capabilities, and hence cannot do highlighting. This is useful for different modes for a terminal, or for different user preferences. More than one use capability may be given.

PART 2: PRINTER CAPABILITIES

The terminfo database allows you to define capabilities of printers as well as terminals. To find out what capabilities are available for printers as well as for terminals, see the two lists under "DEVICE CAPABILITIES" that list capabilities by variable and by capability name.

Section 2-1: Rounding Values

Because parameterized string capabilities work only with integer values, we recommend that terminfo designers create strings that expect numeric values that have been rounded. Application designers should note this and should always round values to the nearest integer before using them with a parameterized string capability.

Section 2-2: Printer Resolution

A printer's resolution is defined to be the smallest spacing of characters it can achieve. In general printers have independent resolution horizontally and vertically. Thus the vertical resolution of a printer can be determined by measuring the smallest achievable distance between consecutive printing baselines, while the horizontal resolution can be determined by measuring the smallest achievable distance between the left-most edges of consecutive printed, identical, characters.

All printers are assumed to be capable of printing with a uniform horizontal and vertical resolution. The view of printing that terminfo currently presents is one of printing inside a uniform matrix: All characters are printed at fixed positions relative to each ``cell'' in the matrix; furthermore, each cell has the same size given by the smallest horizontal and vertical step sizes dictated by the resolution. (The cell size can be changed as will be seen later.)

Many printers are capable of ``proportional printing,'' where the horizontal spacing depends on the size of the character last printed. terminfo does not make use of this capability, although it does provide enough capability definitions to allow an application to simulate proportional printing.

A printer must not only be able to print characters as close together as the horizontal and vertical resolutions suggest, but also of ``moving'' to a position an integral multiple of the smallest distance away from a previous position. Thus printed characters can be spaced apart a distance that is an integral multiple of the smallest distance, up to the length or width of a single page.

Some printers can have different resolutions depending on different ``modes.'' In ``normal mode,'' the existing terminfo capabilities are assumed to work on columns and lines, just like a video terminal. Thus the old lines capability would give the length of a page in lines, and the cols capability would give the width of a page in columns. In ``micro mode,'' many terminfo capabilities work on increments of lines and columns. With some printers the micro mode may be concomitant with normal mode, so that all the capabilities work at the same time.

Section 2-3: Specifying Printer Resolution

The printing resolution of a printer is given in several ways. Each specifies the resolution as the number of smallest steps per distance:

   Specification of Printer Resolution
    Characteristic Number of Smallest Steps

     orhi    Steps per inch horizontally
     orvi    Steps per inch vertically
     orc     Steps per column
     orl     Steps per line

When printing in normal mode, each character printed causes movement to the next column, except in special cases described later; the distance moved is the same as the per-column resolution. Some printers cause an automatic movement to the next line when a character is printed in the rightmost position; the distance moved vertically is the same as the per-line resolution. When printing in micro mode, these distances can be different, and may be zero for some printers.

    Specification of Printer Resolution
     Automatic Motion after Printing

     Normal Mode:

     orc     Steps moved horizontally
     orl     Steps moved vertically

     Micro Mode:

     mcs     Steps moved horizontally
     mls     Steps moved vertically

Some printers are capable of printing wide characters. The distance moved when a wide character is printed in normal mode may be different from when a regular width character is printed. The distance moved when a wide character is printed in micro mode may also be different from when a regular character is printed in micro mode, but the differences are assumed to be related: If the distance moved for a regular character is the same whether in normal mode or micro mode (mcs=orc), then the distance moved for a wide character is also the same whether in normal mode or micro mode. This doesn't mean the normal character distance is necessarily the same as the wide character distance, just that the distances don't change with a change in normal to micro mode. However, if the distance moved for a regular character is different in micro mode from the distance moved in normal mode (mcs<orc), the micro mode distance is assumed to be the same for a wide character printed in micro mode, as the table below shows.

    Specification of Printer Resolution
     Automatic Motion after Printing Wide Character

     Normal Mode or Micro Mode (mcs = orc):
     sp
     widcs   Steps moved horizontally

     Micro Mode (mcs < orc):

     mcs     Steps moved horizontally

There may be control sequences to change the number of columns per inch (the character pitch) and to change the number of lines per inch (the line pitch). If these are used, the resolution of the printer changes, but the type of change depends on the printer:

    Specification of Printer Resolution
     Changing the Character/Line Pitches

     cpi     Change character pitch
     cpix    If set, cpi changes orhi, otherwise changes
     orc
     lpi     Change line pitch
     lpix    If set, lpi changes orvi, otherwise changes
     orl
     chr     Change steps per column
     cvr     Change steps per line

The cpi and lpi string capabilities are each used with a single argument, the pitch in columns (or characters) and lines per inch, respectively. The chr and cvr string capabilities are each used with a single argument, the number of steps per column and line, respectively.

Using any of the control sequences in these strings will imply a change in some of the values of orc, orhi, orl, and orvi. Also, the distance moved when a wide character is printed, widcs, changes in relation to orc. The distance moved when a character is printed in micro mode, mcs, changes similarly, with one exception: if the distance is 0 or 1, then no change is assumed (see items marked with * in the following table).

Programs that use cpi, lpi, chr, or cvr should recalculate the printer resolution (and should recalculate other values— see "Effect of Changing Printing Resolution" under "Dot-Mapped Graphics").

    Specification of Printer Resolution
     Effects of Changing the Character/Line Pitches

   Before            After

Using cpi with cpix clear:
 $bold orhi '$   orhi
 $bold orc '$    $bold orc = bold orhi over V sub italic cpi$

 Using cpi with cpix set:
 $bold orhi '$   $bold orhi = bold orc cdot V sub italic cpi$
 $bold orc '$    $bold orc$

 Using lpi with lpix clear:
 $bold orvi '$   $bold orvi$
 $bold orl '$    $bold orl = bold orvi over V sub italic lpi$

 Using lpi with lpix set:
 $bold orvi '$   $bold orvi = bold orl cdot V sub italic lpi$
 $bold orl '$    $bold orl$

 Using chr:
 $bold orhi '$   $bold orhi$
 $bold orc '$    $V sub italic chr$

 Using cvr:
 $bold orvi '$   $bold orvi$
 $bold orl '$    $V sub italic cvr$

 Using cpi or chr:
 $bold widcs '$  $bold widcs = bold {widcs '} bold orc over { bold {orc '} }$
 $bold mcs '$    $bold mcs = bold {mcs '} bold orc over { bold {orc '} }$

$V sub italic cpi$, $V sub italic lpi$, $V sub italic chr$, and $V sub italic cvr$ are the arguments used with cpi, lpi, chr, and cvr, respectively. The prime marks ( ' ) indicate the old values.

Section 2-4: Capabilities that Cause Movement

In the following descriptions, ``movement'' refers to the motion of the ``current position.'' With video terminals this would be the cursor; with some printers this is the carriage position. Other printers have different equivalents. In general, the current position is where a character would be displayed if printed.

terminfo has string capabilities for control sequences that cause movement a number of full columns or lines. It also has equivalent string capabilities for control sequences that cause movement a number of smallest steps.

String Capabilities for Motion

     mcub1   Move 1 step left
     mcuf1   Move 1 step right
     mcuu1   Move 1 step up
     mcud1   Move 1 step down
     mcub    Move N steps left
     mcuf    Move N steps right
     mcuu    Move N steps up
     mcud    Move N steps down
     mhpa    Move N steps from the left
     mvpa    Move N steps from the top

The latter six strings are each used with a single argument, N.

Sometimes the motion is limited to less than the width or length of a page. Also, some printers don't accept absolute motion to the left of the current position. terminfo has capabilities for specifying these limits.

Limits to Motion

     mjump     Limit on use of mcub1, mcuf1, mcuu1,  mcud1
     maddr      Limit on use of mhpa, mvpa
     xhpa        If set, hpa and mhpa can't move left
     xvpa        If set, vpa and mvpa can't move up

If a printer needs to be in a ``micro mode'' for the motion capabilities described above to work, there are string capabilities defined to contain the control sequence to enter and exit this mode. A boolean is available for those printers where using a carriage return causes an automatic return to normal mode.

   Entering/Exiting Micro Mode

     smicm   Enter micro mode
     rmicm   Exit micro mode
     crxm    Using cr exits micro mode

The movement made when a character is printed in the rightmost position varies among printers. Some make no movement, some move to the beginning of the next line, others move to the beginning of the same line. terminfo has boolean capabilities for describing all three cases.

               What Happens After Character
                Printed in Rightmost Position

     sam     Automatic move to beginning of same line

Some printers can be put in a mode where the normal direction of motion is reversed. This mode can be especially useful when there are no capabilities for leftward or upward motion, because those capabilities can be built from the motion reversal capability and the rightward or downward motion capabilities. It is best to leave it up to an application to build the leftward or upward capabilities, though, and not enter them in the terminfo database. This allows several reverse motions to be strung together without intervening wasted steps that leave and reenter reverse mode.

Entering/Exiting Reverse Modes

     slm     Reverse sense of horizontal motions
     rlm     Restore sense of horizontal motions
     sum     Reverse sense of vertical motions
     rum     Restore sense of vertical motions

     While sense of horizontal motions reversed:
     mcub1   Move 1 step right
     mcuf1   Move 1 step left
     mcub    Move N steps right
     mcuf    Move N steps left
     cub1    Move 1 column right
     cuf1    Move 1 column left
     cub     Move N columns right
     cuf     Move N columns left

     While sense of vertical motions reversed:
     mcuu1   Move 1 step down
     mcud1   Move 1 step up
     mcuu    Move N steps down
     mcud    Move N steps up
     cuu1    Move 1 line down
     cud1    Move 1 line up
     cuu     Move N lines down
     cud     Move N lines up

The reverse motion modes should not affect the mvpa and mhpa absolute motion capabilities. The reverse vertical motion mode should, however, also reverse the action of the line ``wrapping'' that occurs when a character is printed in the right-most position. Thus printers that have the standard terminfo capability am defined should experience motion to the beginning of the previous line when a character is printed in the right-most position under reverse vertical motion mode.

The action when any other motion capabilities are used in reverse motion modes is not defined; thus, programs must exit reverse motion modes before using other motion capabilities.

Two miscellaneous capabilities complete the list of new motion capabilities. One of these is needed for printers that move the current position to the beginning of a line when certain control characters, such as ``line-feed'' or ``form-feed,'' are used. The other is used for the capability of suspending the motion that normally occurs after printing a character.

Miscellaneous Motion Strings

     docr    List of control characters causing cr
     zerom   Prevent auto motion after printing next single character

Margins

terminfo provides two strings for setting margins on terminals: one for the left and one for the right margin. Printers, however, have two additional margins, for the top and bottom margins of each page. Furthermore, some printers require not using motion strings to move the current position to a margin and then fixing the margin there, but require the specification of where a margin should be regardless of the current position. Therefore terminfo offers six additional strings for defining margins with printers.

Setting Margins

     smgl    Set left margin at current column
     smgr    Set right margin at current column
     smgb    Set bottom margin at current line
     smgt    Set top margin at current line
     smgbp   Set bottom margin at line N
     smglp   Set left margin at column N
     smgrp   Set right margin at column N
     smgtp   Set top margin at line N

The last four strings are used with one or more arguments that give the position of the margin or margins to set. If both of smglp and smgrp are set, each is used with a single argument, N, that gives the column number of the left and right margin, respectively. If both of smgtp and smgbp are set, each is used to set the top and bottom margin, respectively: smgtp is used with a single argument, N, the line number of the top margin; however, smgbp is used with two arguments, N and M, that give the line number of the bottom margin, the first counting from the top of the page and the second counting from the bottom. This accommodates the two styles of specifying the bottom margin in different manufacturers' printers. When coding a terminfo entry for a printer that has a settable bottom margin, only the first or second parameter should be used, depending on the printer. When writing an application that uses smgbp to set the bottom margin, both arguments must be given.

If only one of smglp and smgrp is set, then it is used with two arguments, the column number of the left and right margins, in that order. Likewise, if only one of smgtp and smgbp is set, then it is used with two arguments that give the top and bottom margins, in that order, counting from the top of the page. Thus when coding a terminfo entry for a printer that requires setting both left and right or top and bottom margins simultaneously, only one of smglp and smgrp or smgtp and smgbp should be defined; the other should be left blank. When writing an application that uses these string capabilities, the pairs should be first checked to see if each in the pair is set or only one is set, and should then be used accordingly.

In counting lines or columns, line zero is the top line and column zero is the left-most column. A zero value for the second argument with smgbp means the bottom line of the page.

All margins can be cleared with mgc.

Shadows, Italics, Wide Characters

Five new sets of strings describe the capabilities printers have of enhancing printed text.

Enhanced Printing

     sshm    Enter shadow-printing mode
     rshm    Exit shadow-printing mode
     sitm    Enter italicizing mode
     ritm    Exit italicizing mode
     swidm   Enter wide character mode
     rwidm   Exit wide character mode
     ssupm   Enter superscript mode
     rsupm   Exit superscript mode
     supcs   List of characters available as superscripts
     ssubm   Enter subscript mode
     rsubm   Exit subscript mode
     subcs   List of characters available as subscripts

If a printer requires the sshm control sequence before every character to be shadow-printed, the rshm string is left blank. Thus programs that find a control sequence in sshm but none in rshm should use the sshm control sequence before every character to be shadow-printed; otherwise, the sshm control sequence should be used once before the set of characters to be shadow-printed, followed by rshm. The same is also true of each of the sitm/ritm, swidm/rwidm, ssupm/rsupm, and ssubm/ rsubm pairs.

Note that terminfo also has a capability for printing emboldened text (bold). While shadow printing and emboldened printing are similar in that they ``darken'' the text, many printers produce these two types of print in slightly different ways. Generally, emboldened printing is done by overstriking the same character one or more times. Shadow printing likewise usually involves overstriking, but with a slight movement up and/or to the side so that the character is ``fatter.''

It is assumed that enhanced printing modes are independent modes, so that it would be possible, for instance, to shadow print italicized subscripts.

As mentioned earlier, the amount of motion automatically made after printing a wide character should be given in widcs.

If only a subset of the printable ASCII characters can be printed as superscripts or subscripts, they should be listed in supcs or subcs strings, respectively. If the ssupm or ssubm strings contain control sequences, but the corresponding supcs or subcs strings are empty, it is assumed that all printable ASCII characters are available as superscripts or subscripts.

Automatic motion made after printing a superscript or subscript is assumed to be the same as for regular characters. Thus, for example, printing any of the following three examples will result in equivalent motion:

---

Bi B_i Bⁱ

---

Note that the existing msgr boolean capability describes whether motion control sequences can be used while in ``standout mode.'' This capability is extended to cover the enhanced printing modes added here. msgr should be set for those printers that accept any motion control sequences without affecting shadow, italicized, widened, superscript, or subscript printing. Conversely, if msgr is not set, a program should end these modes before attempting any motion.

Section 2-5: Alternate Character Sets

In addition to allowing you to define line graphics (described in Section 1-12), terminfo lets you define alternate character sets. The following capabilities cover printers and terminals with multiple selectable or definable character sets.

Alternate Character Sets

     scs     Select character set N
     scsd    Start definition of character set N, M characters
     defc    Define character A, B dots wide, descender D
     rcsd    End definition of character set N
     csnm    List of character set names
     daisy   Printer has manually changed print-wheels

The scs, rcsd, and csnm strings are used with a single argument, N, a number from 0 to 63 that identifies the character set. The scsd string is also used with the argument N and another, M, that gives the number of characters in the set. The defc string is used with three arguments: A gives the ASCII code representation for the character, B gives the width of the character in dots, and D is zero or one depending on whether the character is a ``descender'' or not. The defc string is also followed by a string of ``image-data'' bytes that describe how the character looks (see below).

Character set 0 is the default character set present after the printer has been initialized. Not every printer has 64 character sets, of course; using scs with an argument that doesn't select an available character set should cause a null result from tparm.

If a character set has to be defined before it can be used, the scsd control sequence is to be used before defining the character set, and the rcsd is to be used after. They should also cause a null result from tparm when used with an argument N that doesn't apply. If a character set still has to be selected after being defined, the scs control sequence should follow the rcsd control sequence. By examining the results of using each of the scs, scsd, and rcsd strings with a character set number in a call to tparm, a program can determine which of the three are needed.

Between use of the scsd and rcsd strings, the defc string should be used to define each character. To print any character on printers covered by terminfo, the ASCII code is sent to the printer. This is true for characters in an alternate set as well as ``normal'' characters. Thus the definition of a character includes the ASCII code that represents it. In addition, the width of the character in dots is given, along with an indication of whether the character should descend below the print line (such as the lower case letter ``g'' in most character sets). The width of the character in dots also indicates the number of image-data bytes that will follow the defc string. These image-data bytes indicate where in a dot-matrix pattern ink should be applied to ``draw'' the character; the number of these bytes and their form are defined below under ``Dot-Mapped Graphics.''

It's easiest for the creator of terminfo entries to refer to each character set by number; however, these numbers will be meaningless to the application developer. The csnm string alleviates this problem by providing names for each number.

When used with a character set number in a call to tparm, the csnm string will produce the equivalent name. These names should be used as a reference only. No naming convention is implied, although anyone who creates a terminfo entry for a printer should use names consistent with the names found in user documents for the printer. Application developers should allow a user to specify a character set by number (leaving it up to the user to examine the csnm string to determine the correct number), or by name, where the application examines the csnm string to determine the corresponding character set number.

These capabilities are likely to be used only with dot-matrix printers. If they are not available, the strings should not be defined. For printers that have manually changed print-wheels or font cartridges, the boolean daisy is set.

Section 2-6: Dot-Matrix Graphics

Dot-matrix printers typically have the capability of reproducing ``raster-graphics'' images. Three new numeric capabilities and three new string capabilities can help a program draw raster-graphics images independent of the type of dot-matrix printer or the number of pins or dots the printer can handle at one time.

Dot-Matrix Graphics

     npins   Number of pins, N, in print-head
     spinv   Spacing of pins vertically in pins per inch
     spinh   Spacing of dots horizontally in dots per inch
     porder  Matches software bits to print-head pins
     sbim    Start printing bit image graphics, B bits wide
     rbim    End printing bit image graphics

The sbim sring is used with a single argument, B, the width of the image in dots.

The model of dot-matrix or raster-graphics that terminfo presents is similar to the technique used for most dot-matrix printers: each pass of the printer's print-head is assumed to produce a dot-matrix that is N dots high and B dots wide. This is typically a wide, squat, rectangle of dots. The height of this rectangle in dots will vary from one printer to the next; this is given in the npins numeric capability. The size of the rectangle in fractions of an inch will also vary; it can be deduced from the spinv and spinh numeric capabilities. With these three values an application can divide a complete raster-graphics image into several horizontal strips, perhaps interpolating to account for different dot spacing vertically and horizontally.

The sbim and rbim strings are used to start and end a dot-matrix image, respectively. The sbim string is used with a single argument that gives the width of the dot-matrix in dots. A sequence of ``image-data bytes'' are sent to the printer after the sbim string and before the rbim string. The number of bytes is a integral multiple of the width of the dot-matrix; the multiple and the form of each byte is determined by the porder string as described below.

The porder string is a comma separated list of pin numbers optionally followed by an numerical offset. The offset, if given, is separated from the list with a semicolon. The position of each pin number in the list corresponds to a bit in an 8-bit data byte. The pins are numbered consecutively from 1 to npins, with 1 being the top pin. Note that the term ``pin'' is used loosely here; ``ink-jet'' dot-matrix printers don't have pins, but can be considered to have an equivalent method of applying a single dot of ink to paper. The bit positions in porder are in groups of 8, with the first position in each group the most significant bit and the last position the least significant bit. An application produces 8-bit bytes in the order of the groups in porder.

An application computes the ``image-data bytes'' from the internal image, mapping vertical dot positions in each print-head pass into 8-bit bytes, using a 1 bit where ink should be applied and 0 where no ink should be applied. This can be reversed (0 bit for ink, 1 bit for no ink) by giving a negative pin number. If a position is skipped in porder, a 0 bit is used. If a position has a lower case `x' instead of a pin number, a 1 bit is used in the skipped position. For consistency, a lower case `o' can be used to represent a 0 filled, skipped bit. There must be a multiple of 8 bit positions used or skipped in porder; if not, 0 bits are used to fill the last byte in the least significant bits. The offset, if given, is added to each data byte; the offset can be negative.

Some examples may help clarify the use of the porder string. The AT&T 470, AT&T 475 and C.Itoh 8510 printers provide eight pins for graphics. The pins are identified top to bottom by the 8 bits in a byte, from least significant to most. The porder strings for these printers would be 8,7,6,5,4,3,2,1. The AT&T 478 and AT&T 479 printers also provide eight pins for graphics. However, the pins are identified in the reverse order. The porder strings for these printers would be 1,2,3,4,5,6,7,8. The AT&T 5310, AT&T 5320, DEC LA100, and DEC LN03 printers provide six pins for graphics. The pins are identified top to bottom by the decimal values 1, 2, 4, 8, 16 and 32. These correspond to the low six bits in an 8-bit byte, although the decimal values are further offset by the value 63. The porder string for these printers would be ,,6,5,4,3,2,1;63, or alternately o,o,6,5,4,3,2,1;63.

Section 2-7: Effect of Changing Printing Resolution

If the control sequences to change the character pitch or the line pitch are used, the pin or dot spacing may change:

    Dot-Matrix Graphics
     Changing the Character/Line Pitches

     cpi     Change character pitch
     cpix    If set, cpi changes spinh
     lpi     Change line pitch
     lpix    If set, lpi changes spinv

Programs that use cpi or lpi should recalculate the dot spacing:

Dot-Matrix Graphics
     Effects of Changing the Character/Line Pitches

     Before               After

Using cpi with cpix clear:
 $bold spinh '$    $bold spinh$

Using cpi with cpix set:
 $bold spinh '$    $bold spinh = bold spinh ' cdot bold orhi over 
                          { bold {orhi '} }$
     
Using lpi with lpix clear:
 $bold spinv '$    $bold spinv$

Using lpi with lpix set:
 $bold spinv '$    $bold spinv = bold {spinv '} cdot bold orhi over 
                          { bold {orhi '}}$

Using chr:
 $bold spinh '$    $bold spinh$

Using cvr:
 $bold spinv '$    $bold spinv$

orhi' and orhi are the values of the horizontal resolution in steps per inch, before using cpi and after using cpi, respectively. Likewise, orvi' and orvi are the values of the vertical resolution in steps per inch, before using lpi and after using lpi, respectively. Thus, the changes in the dots per inch for dot-matrix graphics follow the changes in steps per inch for printer resolution.

Section 2-8: Print Quality

Many dot-matrix printers can alter the dot spacing of printed text to produce near ``letter quality'' printing or ``draft quality'' printing. Usually it is important to be able to choose one or the other because the rate of printing generally falls off as the quality improves. There are three new strings used to describe these capabilities.

Print Quality

     snlq    Set near-letter quality print
     snrmq   Set normal quality print
     sdrfq   Set draft quality print

The capabilities are listed in decreasing levels of quality. If a printer doesn't have all three levels, one or two of the strings should be left blank as appropriate.

Section 2-9: Printing Rate and Buffer Size

Because there is no standard protocol that can be used to keep a program synchronized with a printer, and because modern printers can buffer data before printing it, a program generally cannot determine at any time what has been printed. Two new numeric capabilities can help a program estimate what has been printed.

Print Rate/Buffer Size

     cps     Nominal print rate in characters per second
     bufsz   Buffer capacity in characters

cps is the nominal or average rate at which the printer prints characters; if this value is not given, the rate should be estimated at one-tenth the prevailing baud rate. bufsz is the maximum number of subsequent characters buffered before the guaranteed printing of an earlier character, assuming proper flow control has been used. If this value is not given it is assumed that the printer does not buffer characters, but prints them as they are received.

As an example, if a printer has a 1000-character buffer, then sending the letter ``a'' followed by 1000 additional characters is guaranteed to cause the letter ``a'' to print. If the same printer prints at the rate of 100 characters per second, then it should take 10 seconds to print all the characters in the buffer, less if the buffer is not full. By keeping track of the characters sent to a printer, and knowing the print rate and buffer size, a program can synchronize itself with the printer.

Note that most printer manufacturers advertise the maximum print rate, not the nominal print rate. A good way to get a value to put in for cps is to generate a few pages of text, count the number of printable characters, and then see how long it takes to print the text.

Applications that use these values should recognize the variability in the print rate. Straight text, in short lines, with no embedded control sequences will probably print at close to the advertised print rate and probably faster than the rate in cps. Graphics data with a lot of control sequences, or very long lines of text, will print at well below the advertised rate and below the rate in cps. If the application is using cps to decide how long it should take a printer to print a block of text, the application should pad the estimate. If the application is using cps to decide how much text has already been printed, it should shrink the estimate. The application will thus err in favor of the user, who wants, above all, to see all the output in its correct place.

FILES

/usr/share/lib/terminfo/?/*

compiled terminal description database

/usr/share/lib/.COREterm/?/*

subset of compiled terminal description database

/usr/share/lib/tabset/*

tab settings for some terminals, in a format appropriate to be output to the terminal (escape sequences that set margins and tabs)

SEE ALSO

ls(1), pg(1), stty(1), tput(1), tty(1), vi(1), infocmp(1M), tic(1M), printf(3C), curses(3CURSES), curses(3XCURSES)

NOTES

The most effective way to prepare a terminal description is by imitating the description of a similar terminal in terminfo and to build up a description gradually, using partial descriptions with a screen oriented editor, such as vi, to check that they are correct. To easily test a new terminal description the environment variable TERMINFO can be set to the pathname of a directory containing the compiled description, and programs will look there rather than in /usr/share/lib/terminfo.

SunOS 5.8  Last Revised 9 Jul 1996

NAME | SYNOPSIS | DESCRIPTION | FILES | SEE ALSO | NOTES