How to Configure a Machine as a Router

Become superuser on the machine to be configured as a router and do the following:

1. Create an /etc/hostname.interface file or each network interface installed.

   For example, create hostname.ie0 and hostname.ie1. (See "/etc/hostname.interface File" for more information.)

2. Type in each file the host name you have selected for that interface.

   For example, you could type the name timbuktu in the file hostname.ie0, then type the name timbuktu-201 in the file hostname.ie1. Both interfaces would be located on the same machine.

3. Type the host name and IP address of each interface into /etc/inet/hosts.

   For example:

   192.9.200.20 timbuktu #interface for network 192.9.200 192.9.201.20 timbuktu-201 #interface for network 192.9.201 192.9.200.9 gobi 192.9.200.10 mojave 192.9.200.110 saltlake 192.9.200.12 chilean

   The interfaces timbuktu and timbuktu-201 are on the same machine. Notice that the network address for timbuktu-201 is different from that of timbuktu. That is because the medium for network 192.9.201 is connected to the timbuktu-201 network interface while the media for network 192.9.200 is connected to the timbuktu interface.

4. If the router is connected to any subnetted network, edit /etc/inet/netmasks and type the local network number (129.9.0.0, for example) and associated netmask number (255.255.255.0, for example).