You must use the settings in this typeface for the DPT adapter if an IDE controller is installed:
o I/O Address: |
0x1F0, 0x230 |
o IRQ Level: |
12, 14, 15 |
o DMA Channel: |
5, 6 |
o Emulation: |
Disabled |
Follow the instructions in "DPT PM-2022, PM-2042W, PM-2122, PM-2142W SCSI and PM-3222, PM-3332UW SCSI RAID HBAs" to disable WD1003 emulation using the DPT SCSI Storage Manager Utility diskette.
Emulation mode for drives 0 and 1 should be set to 0 indicating "no drives present," or there will be missing drives when the system boots.
Use edge-triggered interrupts on the PM-2011.
The PM-2041W adapter's SmartROM must be upgraded to at least version 3DL in place of 3D0. The BIOS on adapters with version 3D0 does not detect any devices connected to it.