Action
on No Response
|
The action the adapter takes when no ACK is received from the
external system in the allotted time. The amount of time is determined
by the Time To Wait For A Response property (see Communication Control - TCP/IP).
Select one of the following options:
-
Exit – The
adapter terminates its connection with the external system and shuts
down.
-
Resend –
The adapter attempts to resend the message to the external system.
The Resend option is only allowed when sequence numbering is in effect.
-
Reset – The
adapter closes its connection with the external system and goes through
the connection scenario.
This property is used for outbound
Collaboration code.
|
Action
on Max No Response
|
The action the adapter takes when it attempts to send a message
to the external system the maximum allowed number of times and does
not receive any response (HL7 Application Acknowledgement) from the
external system. The maximum number times the adapter sends a message
without receiving a response is determined by the Max No
Response property (see Communication Control - TCP/IP). Select
one of the following options:
-
Exit – The
adapter terminates its connection with the external system and shuts
down.
-
Reset – The
adapter closes its connection with the external system and goes through
the connection scenario.
This property is used for outbound
Collaboration code.
|
Action
on Max Failed Read Retry
|
The action the adapter takes after it has reached the empty
read limit set by the Max Empty Read Retry property.
Select one of the following recourse options:
-
Exit – The
adapter terminates its connection with the external system and shuts
down.
-
Reset – The
adapter closes its connection with the external system and goes through
the connection scenario.
This property is used for outbound
Collaboration code.
|
Action
on Nak Received
|
The action the adapter takes when it receives an HL7 Application
NAK from the external system. Select one of the following options:
-
Resend –
The adapter attempts to resend the message to the external system.
-
Reset – The
adapter closes its connection with the external system and goes through
the connection scenario.
-
Skip Message –
The adapter remains connected, but writes the message to an error
queue.
Note –
Do not set both the Action On NAK Received and Action On Max NAK Received properties to Skip Message.
This property is used for outbound Collaboration code.
|
Action
on Max Nak Received
|
The action the adapter takes when the maximum number of HL7
Application NAKs have been received from the external system, as set
by the Max NAK Receive Retry property (see Communication Control - TCP/IP).
Select one of the following options:
-
Exit – The
adapter terminates its connection with the external system and shuts
down.
-
Reset – The
adapter closes its connection with the external system and goes through
the connection scenario.
-
Skip Message –
The adapter remains connected, but writes the message to an error
queue.
This property is used for outbound Collaboration
code.
Note –
Do not set both the Action On NAK Received and Action On Max NAK Received properties to Skip Message.
|
Action
on Max Nak Sent
|
The action the adapter takes when it has sent the maximum allowed
number of NAKs to the external system, as set by the Max
NAK Send Retry parameter (see Communication Control - TCP/IP). Select
one of the following options:
-
Exit – The
adapter terminates its connection with the external system and shuts
down.
-
Reset – The
adapter closes its connection with the external system and goes through
the connection scenario.
This property is used for inbound
Collaboration code.
|